This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Thomas Ansorg kobayashi_maru at onlinehome.dehi to enable as many as possible of you to help me, heres what bs11_config said (the old version): bs11_config (C) 2009-2010 by Harald Welte and Dieter Spaar This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY LMT LOGON: ACK PHASE: 3 Normal MBCCU0: Load MBCCU1: Load Abis-link: Restoring BS11 ATTRIBUTES: BS-11 ESN PCB Serial Number: BS-11 ESN Hardware Code Number: BS-11 ESN Firmware Code Number: PLL Set Value=1006, Work Value=1038 SITE MANAGER ATTRIBUTES: E1 Channel: Port=0 Timeslot=1 (Full Slot) TEI: 25 BS11 Line Interface ATTRIBUTES: PLL Mode: Standalone BS11 CCLK ATTRIBUTES: CCLK Accuracy: Medium (0) BS11 Power Amplifier 0 ATTRIBUTES: TRX Power: 30mW LMT LOGOFF: ACK thats the working one, the non-working says exactly the same, except pll(1073) and work(1073) the abis link on the 2nd is also up, but handys dont find it. the intension ist a multi drop config, but before that, the 2 bs11 should work on its own, right? T. -- Wer Rechtschreibfehler findet, darf sie behalten!