This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Stuart Baggs stuart at bluewave.imHi, I have a nanobts config file: ! OpenBSC configuration saved from vty ! password foo ! line vty no login ! network network country code 1 mobile network code 1 short name SomeNet long name SomeNet timer t3101 10 timer t3113 60 auth policy closed bts 0 type nanobts ip.access unit_id 0 0 band GSM1800 location_area_code 1 training_sequence_code 7 base_station_id_code 63 ms max power 40 trx 0 rf_locked 0 arfcn 514 timeslot 0 phys_chan_config CCCH+SDCCH4 timeslot 1 phys_chan_config SDCCH8 timeslot 2 phys_chan_config TCH/F timeslot 3 phys_chan_config TCH/F timeslot 4 phys_chan_config TCH/F timeslot 5 phys_chan_config TCH/F bsc_hack reports: DB: Database initialized. DB: Database prepared. <000d> input/ipaccess.c:535 accept()ed new OML link from 192.168.1.85 <0005> bsc_init.c:735 bootstrapping OML for BTS 0 The light on the nanoBTS flashes green but does not go solid green / or start transmitting a signal. Any ideas? Thanks, Stuart