This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Harald Welte laforge at gnumonks.orgOn Mon, May 25, 2009 at 03:08:10PM +0200, Eric Cathelinaud wrote: > I didn't doanwload: > -the SAFETY LOAD software > -the BTS software > Is it necessary since I can reach Phase 3 and since I can see the Firmware > Code Number? no, it is not. the firmware is completely installed on your system, otherwise the TRX0 would never get into 'Load" > Mon May 25 16:07:39 2009 <1000> input/misdn.c:125 alen =6, dev(0) channel(0) > sapi(63) tei(127) > Mon May 25 16:07:39 2009 <1000> input/misdn.c:128 <= len = 12, prim(0x8) > id(0x7f3f): DL_INFORMATION_IND > Mon May 25 16:07:39 2009 <1000> input/misdn.c:135 DL_INFORMATION_IND: use > channel(0) sapi(63) tei(127) for now > mISDN message for unknown sign_link this basically means that the TEI manager was instantiated on the E1 link, but no TEIs were established, most likely a layer 1 problem... Regards, -- - Harald Welte <laforge at gnumonks.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)