This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Dieter Spaar spaar at mirider.augusta.deHello Harald, On Sun, 28 Jun 2009 23:23:01 +0200, "Harald Welte" <laforge at gnumonks.org> wrote: > > However, since Dieter has been seeing the measurement reports, I would hope he > is able to verify wether it works for him with the current git version of > OpenBSC, or what kind of changes he needs to make it work. Sorry :( I tested it with the git version from yesterday. The TRX0 is configured properly, I can see that the attributes are set as they should. I can also see the measurement reports in my custom traces (I set NM_ATT_BS11_RADIO_MEAS_GRAN to 0x05). I don't use mISDN on Linux (I use Cygwin on Windows with my custom driver). However I had to adjust my custom driver to see the measurement reports in bsc_hack. The reason is that the measurement reports are sent as LAPD UI-Frames and not as LAPD I-Frames and I did not yet take care of UI-Frames. Maybe there is a similar problem with mISDN and UI-Frames. One other thing is that decoding the measurement report might not yet work properly, bsc_hack says that the reports are invalid but for the MA10 Analyzer they are fine. Best regards, Dieter -- Dieter Spaar, Germany spaar at mirider.augusta.de