This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Dieter Spaar spaar at mirider.augusta.deHello Andreas, On Mon, 22 Jun 2009 19:40:17 +0200, "Andreas.Eversberg" <Andreas.Eversberg at versatel.de> wrote: > > after location update fails. "DB: Failed to find the Subscriber...", get > an "ERROR INDICATION" with cause 1. it seems that the mobile just stops > sending on the channel. the channel ressource hold by location update > process is not freed. the last messages show that. > > i will look on this the next days and report if i found something. if > you have any idea, please tell me. the way to test any change/fix is > quite complicated. the bug only occurrs when many phones are available > and when they move from a different network to my network (built in a > car, moving arround.) Just a wild guess: Could it be a reception problem ? If you have set the BS-11 to a high power level, many phones will see it. Currently the BS-11 advises the phones to use a very low power level when activating a channel. So the BS-11 might receive the phone with a low signal strength and the receiption is just too bad (although the phones will receive the BS-11 quite well). The measurement reports should indicate if this is the problem. Out of interest, do you also have a PC with an E1 card in the car or do you use a laptop with an USB (or PCMIA) to E1 interface ? Best regards, Dieter -- Dieter Spaar, Germany spaar at mirider.augusta.de