This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Harald Welte laforge at gnumonks.orgOn Tue, Jun 16, 2009 at 05:22:55PM +0200, Dieter Spaar wrote: > > i like to check out the measturement report feature of GSM. the A-bis > > protocol shows measurement report indications, but i can't see any > > request to turn it on. on the BCCH it is turned on, as far as i can see > > in the bsc_hack.c. what do i miss? (neighbor cell frequencies?) > > You need an active connection between the BTS and the MS to get the > measurement reports. The BTS will send its own results together with > the data received from the MS. If the cell has neighbor cells the > MS will also report their data (right now bsc_hack does not configure > any neighbor cells). ACK! > I am not sure if you will get the measurement reports for an active > connection by default or if they have to be turned on with a "Start > Measurement" command over OML. it's part of the BTS or TRX attributes that are set from the BSC. -- - Harald Welte <laforge at gnumonks.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)