This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Bjoern Heller mailinglists at hellercom.deHi, You need to open registration. telnet localhost 4242 and then enable configure terminal network auth policy accept-all regards tec Am 09.12.2009 um 14:58 schrieb Fabrice Ismael Poundeu Tchouatieu: > Hye everyone, > > i'm trying to build a small GSM Network using OpenBSC and nanoBTS. After the start of bsc_hack, when i try to scanned the network with my mobile station, i do find the right network. But when i try to register into this network, i'm not coming through. It's the first time that i'm trying to used OpenBSC and i do not exactly known how it works. > > below, a part of the output coming out after the start of bsc_hack: > > <0002> gsm_04_08_utils.c:144 (bts 0 trx 0 ts 0 pd 05) Sending 0x18 to MS. > DB: Failed to find the Subscriber. '0' '262##########' > DB: Failed to find the Subscriber. '0' '262##########' > DB: New Subscriber: ID 28, IMSI 262########## > DB: Allocated extension 43234 for IMSI 262##########. > <0001> abis_rsl.c:1377 channel=(bts=0,trx=0,ts=0) chan_nr=0x20 sapi=0 DATA INDICATION > <0004> gsm_04_08.c:948 IDENTITY RESPONSE: mi_type=0x02 MI(35#############) > DB: New Equipment: ID 124, IMEI 35############# > DB: New EquipmentWatch: ID 124, IMSI 262##########, IMEI 35############# > DB: Sync Equipment IMEI=35#############, classmark1=30 > <0010> abis_rsl.c:1273 Activating ARFCN(514) TS(0) SS(1) lctype SDCCH chan_nr=0x28 r=LOCATION_UPDATE ra=0x10 > <0010> abis_rsl.c:1088 channel=(bts=0,trx=0,ts=0) chan_nr=0x28 CHANNEL ACTIVATE ACK > <0001> abis_rsl.c:1377 channel=(bts=0,trx=0,ts=0) chan_nr=0x28 sapi=0 ESTABLISH INDICATION > <0004> gsm_04_08.c:1402 LOCATION UPDATING REQUEST: mi_type=0x04 MI(23########) type=NORMAL <0002> gsm_04_08.c:293 lchan (bts=0,trx=0,ts=0,ch=1) increases usage to: 1 > > > <0002> gsm_04_08_utils.c:144 (bts 0 trx 0 ts 0 pd 05) Sending 0x18 to MS. > DB: Found Subscriber: ID 28, IMSI 262############, NAME '', TMSI 42########, EXTEN '43234', LAC 0, AUTH 0 > DBI: The requested variable type does not match what libdbi thinks it should be > libdbi: dbi_result_get_int_idx: field `classmark1` is not integer type > <0001> abis_rsl.c:1377 channel=(bts=0,trx=0,ts=0) chan_nr=0x20 sapi=0 DATA INDICATION > <0004> gsm_04_08.c:948 IDENTITY RESPONSE: mi_type=0x02 MI(35#############) > DB: Updated EquipmentWatch: ID 124, IMSI 262############, IMEI 35############# > DB: Sync Equipment IMEI=35#############, classmark1=30, classmark2=13 25 , classmark3=13 25 > <0010> abis_rsl.c:1273 Activating ARFCN(514) TS(0) SS(1) lctype SDCCH chan_nr=0x28 r=LOCATION_UPDATE ra=0x06 > <0010> abis_rsl.c:1088 channel=(bts=0,trx=0,ts=0) chan_nr=0x28 CHANNEL ACTIVATE ACK > <0001> abis_rsl.c:1377 channel=(bts=0,trx=0,ts=0) chan_nr=0x28 sapi=0 ESTABLISH INDICATION > <0004> gsm_04_08.c:1402 LOCATION UPDATING REQUEST: mi_type=0x01 MI(262############) type=NORMAL <0002> gsm_04_08.c:293 lchan (bts=0,trx=0,ts=0,ch=1) increases usage to: 1 > > can someone please explains me if those outputs (about the Subscriber ID '28') are OK? > > Best regards; > > -- > Fabrice Ismael Poundeu Tchouatieu > > ---------------------------------------------------------------- > This message was sent using IMP, the Internet Messaging Program. > > - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Björn Heller Jabber: tec at jabber.hellercom.de -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20091209/bf6f333d/attachment.htm>