This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
s4dd at losers.yore.ma s4dd at losers.yore.maHello all, I seem to have fallen at the last hurdle to achieving my first milestone - being able to see an available network from our BS-11/OpenBSC combi on a variety of MEs. Fingers crossed it's something trivial that has been overlooked. I've included some output from bs11_config and bsc_hack below in the hope that someone may spot the issue. Output from bs11_config during bootup: PHASE: 1 Load SMU Intended Abis-link: Down PHASE: 1 Load SMU Intended Abis-link: Down PHASE: 2 Load MBCCU MBCCU0: No Load MBCCU1: No Load Abis-link: Down PHASE: 2 Load MBCCU MBCCU0: Load BTSCAC MBCCU1: No Load Abis-link: Down PHASE: 2 Load MBCCU MBCCU0: Load BTSCAC MBCCU1: Load BTSCAC Abis-link: Down PHASE: 2 Load MBCCU MBCCU0: Load BTSDRX MBCCU1: Load BTSCAC Abis-link: Down PHASE: 2 Load MBCCU MBCCU0: Load BTSDRX MBCCU1: Load BTSDRX Abis-link: Down PHASE: 2 Load MBCCU MBCCU0: Load BTSBBX MBCCU1: Load BTSDRX Abis-link: Down PHASE: 2 Load MBCCU MBCCU0: Load BTSBBX MBCCU1: Load BTSBBX Abis-link: Down PHASE: 2 Load MBCCU MBCCU0: Load BTSBBX MBCCU1: Load BTSBBX Abis-link: Down PHASE: 2 Load MBCCU MBCCU0: Load BTSARC MBCCU1: Load BTSBBX Abis-link: Down PHASE: 2 Load MBCCU MBCCU0: Load BTSARC MBCCU1: Load BTSARC Abis-link: Down PHASE: 2 Load MBCCU MBCCU0: Load MBCCU1: Load BTSARC Abis-link: Down PHASE: 2 Load MBCCU MBCCU0: Load MBCCU1: Load BTSARC Abis-link: Down PHASE: 2 Load MBCCU MBCCU0: Load MBCCU1: Load Abis-link: Down PHASE: 3 Normal MBCCU0: Load MBCCU1: Load Abis-link: Restoring BS11 ATTRIBUTES: SITE MANAGER ATTRIBUTES: E1 Channel: Port=0 Timeslot=1 (Full Slot) TEI: 25 BS11 Line Interface ATTRIBUTES: PLL Mode: E1 Locked BS11 CCLK ATTRIBUTES: BS11 Power Amplifier 0 ATTRIBUTES: TRX Power: 30mW (GSM) LMT LOGOFF: ACK ************************************************************ Output from bs11_config with query: LMT LOGON: ACK PHASE: 3 Normal MBCCU0: Load MBCCU1: Load Abis-link: Up BS11 ATTRIBUTES: SITE MANAGER ATTRIBUTES: E1 Channel: Port=0 Timeslot=1 (Full Slot) TEI: 25 BS11 Line Interface ATTRIBUTES: PLL Mode: Standalone BS11 CCLK ATTRIBUTES: BS11 Power Amplifier 0 ATTRIBUTES: TRX Power: 30mW (GSM) LMT LOGOFF: ACK ************************************************************ bsc_hack startup: DB: Database initialized. DB: Database prepared. e1_reconfig_bts(0) e1_reconfig_ts(0,0,0) e1_reconfig_ts(0,0,1) e1_reconfig_ts(0,0,2) e1_reconfig_ts(0,0,3) e1_reconfig_ts(0,0,4) e1_reconfig_ts(0,0,5) e1_reconfig_ts(0,0,6) e1_reconfig_ts(0,0,7) 1 device found id: 0 Dprotocols: 00000018 Bprotocols: 0000000e protocol: 4 nrbchan: 30 name: hfc-e1.1 activate bchan activate bchan bootstrapping OML for BTS 0 <0020> abis_nm.c:1724 Set BTS Attr (bts=0) <0020> abis_nm.c:1741 Set TRX Attr (bts=0,trx=0) <0020> abis_nm.c:1821 Set Chan Attr (bts=0,trx=0,ts=0) <0020> abis_nm.c:1821 Set Chan Attr (bts=0,trx=0,ts=1) <0020> abis_nm.c:1824 Invalid Channel Combination!!! <0020> abis_nm.c:1821 Set Chan Attr (bts=0,trx=0,ts=2) <0020> abis_nm.c:1704 CONNECT TERR TRAF Um=(bts=0,trx=0,ts=2) E1=(0,2,2) <0020> abis_nm.c:1821 Set Chan Attr (bts=0,trx=0,ts=3) <0020> abis_nm.c:1704 CONNECT TERR TRAF Um=(bts=0,trx=0,ts=3) E1=(0,2,3) <0020> abis_nm.c:1821 Set Chan Attr (bts=0,trx=0,ts=4) <0020> abis_nm.c:1704 CONNECT TERR TRAF Um=(bts=0,trx=0,ts=4) E1=(0,3,0) <0020> abis_nm.c:1821 Set Chan Attr (bts=0,trx=0,ts=5) <0020> abis_nm.c:1704 CONNECT TERR TRAF Um=(bts=0,trx=0,ts=5) E1=(0,3,1) <0020> abis_nm.c:1821 Set Chan Attr (bts=0,trx=0,ts=6) <0020> abis_nm.c:1704 CONNECT TERR TRAF Um=(bts=0,trx=0,ts=6) E1=(0,3,2) <0020> abis_nm.c:1821 Set Chan Attr (bts=0,trx=0,ts=7) <0020> abis_nm.c:1704 CONNECT TERR TRAF Um=(bts=0,trx=0,ts=7) E1=(0,3,3) bootstrapping RSL for BTS/TRX (0/0) using MCC=1 MNC=1 BSIC=63 TSC=7 <0020> abis_nm.c:606 OC=RACK(a4) INST=(00,ff,ff) STATE CHG: OP_STATE=Enabled <0020> abis_nm.c:985 LMT Event LOGON Level=2 Username=FACTORY <0020> abis_nm.c:985 LMT Event LOGOFF Level=2 Username=FACTORY ************************************************************ bsc_hack config used was the vanilla cfg included with the source (openbsc.cfg.1-1). Any help you guys could give is much appreciated! Regards, Paul