AW: Problems with HFC-E1 card (Unknown HFC multiport controller)

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.

dexter zero-kelvin at gmx.de
Tue Aug 18 14:28:33 UTC 2009


Hi!

> i am pretty sure that it's programmed. ;)
>
> what does lspci -v say?
>   
Ok, Here is the output of lspci:

==My card:==

00:09.0 ISDN controller: Cologne Chip Designs GmbH ISDN network
Controller [HFC-E1] (rev 01)
    Subsystem: Cologne Chip Designs GmbH Device b553
    Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin A routed to IRQ 9
    Region 0: I/O ports at cc00 [size=8]
    Region 1: Memory at dfffd000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [40] Power Management version 2
        Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
        Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Kernel modules: hfcmulti



lspci -nn says:

00:09.0 ISDN controller [0204]: Cologne Chip Designs GmbH ISDN network
Controller [HFC-E1] [1397:30b1] (rev 01)



lspci -vmm says:

Slot:    00:09.0
Class:    ISDN controller
Vendor:    Cologne Chip Designs GmbH
Device:    ISDN network Controller [HFC-E1]
SVendor:    Cologne Chip Designs GmbH
SDevice:    Device b553
Rev:    01



==The other (working) card:==

lspci -vvv says:

00:09.0 ISDN controller: Cologne Chip Designs GmbH ISDN network
Controller [HFC-E1] (rev 01)
    Subsystem: Cologne Chip Designs GmbH Device b523
    Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin A routed to IRQ 17
    Region 0: I/O ports at cc00 [disabled] [size=8]
    Region 1: Memory at dfffd000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [40] Power Management version 2
        Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
        Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: hfc_multi
    Kernel modules: hfcmulti



lspci -nn says:

00:09.0 ISDN controller [0204]: Cologne Chip Designs GmbH ISDN network
Controller [HFC-E1] [1397:30b1] (rev 01)



lspci -vmm says:

Slot:    00:09.0
Class:    ISDN controller
Vendor:    Cologne Chip Designs GmbH
Device:    ISDN network Controller [HFC-E1]
SVendor:    Cologne Chip Designs GmbH
SDevice:    Device b523
Rev:    01



Not really different ?!?


regards.
Philipp





More information about the OpenBSC mailing list