This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
dexter zero-kelvin at gmx.deHere is an output from a linux box that works with the other card:
openbsc output:
tatooine:/home/laflocal/openbsc/openbsc/src# ./bsc_hack -f 123
DB: Database initialized.
DB: Database prepared.
0 devices found
error getting info for device 0: No such device
Error during E1 config of BTS 0
lspci output:
tatooine:~# lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo
PRO133x] (rev c4)
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo
MVP3/Pro133x AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South]
(rev 22)
00:07.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 10)
00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 10)
00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 10)
00:07.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
00:09.0 ISDN controller: Cologne Chip Designs GmbH ISDN network
Controller [HFC-E1] (rev 01)
00:0a.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet
Controller
00:0b.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 61)
00:0b.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 61)
00:0b.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 63)
00:0e.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 07)
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400/G450
(rev 03)
Dmesg output:
tatooine:~# dmesg
Linux version 2.6.30.4 (root at tatooine) (gcc version 4.3.2 (Debian
4.3.2-1) ) #1 SMP Sat Aug 8 01:44:27 CEST 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
BIOS-e820: 000000002fff0000 - 000000002fff8000 (ACPI data)
BIOS-e820: 000000002fff8000 - 0000000030000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
DMI 2.3 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==>
(reserved)
last_pfn = 0x2fff0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FE0000000 write-back
1 base 020000000 mask FF0000000 write-back
2 disabled
3 disabled
4 disabled
5 disabled
6 base 0E0000000 mask FFC000000 write-combining
7 disabled
init_memory_mapping: 0000000000000000-000000002fff0000
0000000000 - 0000400000 page 4k
0000400000 - 002fc00000 page 2M
002fc00000 - 002fff0000 page 4k
kernel direct mapping tables up to 2fff0000 @ 10000-15000
ACPI: RSDP 000fc5b0 00014 (v00 AMI )
ACPI: RSDT 2fff0000 0002C (v01 AMIINT 00000010 MSFT 00000099)
ACPI: FACP 2fff0030 00074 (v01 AMIINT 00000010 MSFT 00000099)
ACPI: DSDT 2fff0110 02F9D (v01 VIA APOLLO-P 00001000 MSFT 0100000B)
ACPI: FACS 2fff8000 00040
ACPI: APIC 2fff00b0 0005C (v01 AMIINT 00000009 MSFT 00000099)
ACPI: Local APIC address 0xfee00000
767MB LOWMEM available.
mapped low ram: 0 - 2fff0000
low ram: 0 - 2fff0000
node 0 low ram: 00000000 - 2fff0000
node 0 bootmap 00011000 - 00017000
(8 early reservations) ==> bootmem [0000000000 - 002fff0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 -
0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 -
0000007000]
#3 [0000100000 - 000064b2a4] TEXT DATA BSS ==> [0000100000 -
000064b2a4]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 -
0000100000]
#5 [000064c000 - 000064e0d0] BRK ==> [000064c000 -
000064e0d0]
#6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 -
0000011000]
#7 [0000011000 - 0000017000] BOOTMAP ==> [0000011000 -
0000017000]
found SMP MP-table at [c00fb170] fb170
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x0002fff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0002fff0
On node 0 totalpages: 196479
free_area_init_node: node 0, pgdat c0581d60, node_mem_map c1000200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1504 pages used for memmap
Normal zone: 190992 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ11 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 11 pages at c1604000, static data 22748 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194943
Kernel command line: root=/dev/hda6
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
NR_IRQS:320
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 730.766 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 773228k/786368k available (3239k kernel code, 12500k reserved,
1450k data, 316k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff9d000 - 0xfffff000 ( 392 kB)
vmalloc : 0xf07f0000 - 0xfff9b000 ( 247 MB)
lowmem : 0xc0000000 - 0xefff0000 ( 767 MB)
.init : 0xc059c000 - 0xc05eb000 ( 316 kB)
.data : 0xc0429e99 - 0xc05949a4 (1450 kB)
.text : 0xc0100000 - 0xc0429e99 (3239 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Calibrating delay loop (skipped), value calculated using timer
frequency.. 1461.53 BogoMIPS (lpj=2923064)
Mount-cache hash table entries: 512
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090320
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel Pentium III (Coppermine) stepping 03
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 1461.72 BogoMIPS
(lpj=2923453)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Pentium III (Coppermine) stepping 03
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (2923.25 BogoMIPS).
net_namespace: 980 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe3ffffff]
pci 0000:00:01.0: supports D1
pci 0000:00:07.1: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:07.2: reg 20 io port: [0xc400-0xc41f]
pci 0000:00:07.3: reg 20 io port: [0xc800-0xc81f]
pci 0000:00:07.4: quirk: region 0800-08ff claimed by vt82c586 ACPI
pci 0000:00:07.4: quirk: region 0c00-0c7f claimed by vt82c686 HW-mon
pci 0000:00:07.4: quirk: region 0400-040f claimed by vt82c686 SMB
pci 0000:00:09.0: reg 10 io port: [0xcc00-0xcc07]
pci 0000:00:09.0: reg 14 32bit mmio: [0xdfffd000-0xdfffdfff]
pci 0000:00:09.0: supports D1 D2
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:09.0: PME# disabled
pci 0000:00:0a.0: reg 10 32bit mmio: [0xdffc0000-0xdffdffff]
pci 0000:00:0a.0: reg 14 32bit mmio: [0xdffa0000-0xdffbffff]
pci 0000:00:0a.0: reg 18 io port: [0xd000-0xd03f]
pci 0000:00:0a.0: reg 30 32bit mmio: [0xdff80000-0xdff9ffff]
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:0b.0: reg 20 io port: [0xd400-0xd41f]
pci 0000:00:0b.0: supports D1 D2
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0b.1: reg 20 io port: [0xd800-0xd81f]
pci 0000:00:0b.1: supports D1 D2
pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot
pci 0000:00:0b.1: PME# disabled
pci 0000:00:0b.2: reg 10 32bit mmio: [0xdfffff00-0xdfffffff]
pci 0000:00:0b.2: supports D1 D2
pci 0000:00:0b.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:0b.2: PME# disabled
pci 0000:00:0e.0: reg 10 io port: [0xdc00-0xdc3f]
pci 0000:00:0e.0: supports D2
pci 0000:01:00.0: reg 10 32bit mmio: [0xdc000000-0xddffffff]
pci 0000:01:00.0: reg 14 32bit mmio: [0xdfefc000-0xdfefffff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xdf000000-0xdf7fffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0xdfee0000-0xdfeeffff]
pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xdee00000-0xdfefffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xdac00000-0xdecfffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x9000-0x9fff
pci 0000:00:01.0: MEM window: 0xdee00000-0xdfefffff
pci 0000:00:01.0: PREFETCH window: 0x000000dac00000-0x000000decfffff
pci 0000:00:01.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]
pci_bus 0000:01: resource 1 mem: [0xdee00000-0xdfefffff]
pci_bus 0000:01: resource 2 pref mem [0xdac00000-0xdecfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Machine check exception polling timer started.
Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
msgmni has been set to 1510
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:00:01.0: disabling DAC on VIA PCI bridge
pci 0000:00:07.0: Enabling VIA external APIC routing
pci 0000:01:00.0: Boot video device
Non-volatile memory driver v1.3
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
via82cxxx 0000:00:07.1: VIA vt82c686a (rev 22) IDE UDMA66
via82cxxx 0000:00:07.1: IDE controller (0x1106:0x0571 rev 0x10)
via82cxxx 0000:00:07.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7
ide1: BM-DMA at 0xffa8-0xffaf
Probing IDE interface ide0...
hda: SAMSUNG SP1213N, ATA DISK drive
hdb: Maxtor 6Y160L0, ATA DISK drive
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/66 mode selected
hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/66 mode selected
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing
all legacy ISA IDE ports
ide-gd driver 1.18
hda: max request size: 512KiB
hda: 234493056 sectors (120060 MB) w/8192KiB Cache, CHS=16383/255/63
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13
hda14 hda15 hda16 >
hdb: max request size: 512KiB
hdb: 320173056 sectors (163928 MB) w/2048KiB Cache, CHS=19929/255/63
hdb: cache flushes supported
hdb: hdb1
ide-cd driver 5.00
uhci_hcd: USB Universal Host Controller Interface driver
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) ->
IRQ 10
uhci_hcd 0000:00:07.2: VIA VLink IRQ fixup, from 5 to 10
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 10, io base 0x0000c400
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.30.4 uhci_hcd
usb usb1: SerialNumber: 0000:00:07.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:07.3: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) ->
IRQ 10
uhci_hcd 0000:00:07.3: VIA VLink IRQ fixup, from 5 to 10
uhci_hcd 0000:00:07.3: UHCI Host Controller
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:07.3: irq 10, io base 0x0000c800
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.30.4 uhci_hcd
usb usb2: SerialNumber: 0000:00:07.3
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:0b.0: UHCI Host Controller
uhci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:0b.0: irq 19, io base 0x0000d400
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.30.4 uhci_hcd
usb usb3: SerialNumber: 0000:00:0b.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:0b.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:0b.1: UHCI Host Controller
uhci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:0b.1: irq 16, io base 0x0000d800
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.30.4 uhci_hcd
usb usb4: SerialNumber: 0000:00:0b.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram
Driver for 1-wire Dallas network protocol.
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI No-Shortcut mode
rtc_cmos 00:02: setting system clock to 2009-08-17 18:17:55 UTC (1250533075)
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
usb 1-2: new full speed USB device using uhci_hcd and address 2
usb 1-2: New USB device found, idVendor=067b, idProduct=2303
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: USB-Serial Controller D
usb 1-2: Manufacturer: Prolific Technology Inc.
usb 1-2: configuration #1 chosen from 1 choice
usb 4-2: new full speed USB device using uhci_hcd and address 2
usb 4-2: New USB device found, idVendor=05e3, idProduct=0605
usb 4-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 4-2: Product: USB2.0 Hub
usb 4-2: configuration #1 chosen from 1 choice
hub 4-2:1.0: USB hub found
hub 4-2:1.0: 4 ports detected
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with writeback data mode.
VFS: Mounted root (ext3 filesystem) readonly on device 3:6.
Freeing unused kernel memory: 316k freed
Write protecting the kernel text: 3240k
Write protecting the kernel read-only data: 1212k
Linux agpgart interface v0.103
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO
[PCSPP,TRISTATE,COMPAT,ECP]
agpgart: Detected VIA Apollo Pro 133 chipset
agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
parport_pc: VIA parallel port: io=0x378, irq=7
Modular ISDN core version 1.1.20
input: Power Button as /class/input/input0
ACPI: Power Button [PWRF]
input: Power Button as /class/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /class/input/input2
ACPI: Sleep Button [SLPB]
NET: Registered protocol family 34
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e1000 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
e1000 0000:00:0a.0: PCI: Disallowing DAC for device
processor ACPI_CPU:00: registered as cooling_device0
processor ACPI_CPU:01: registered as cooling_device1
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (33 C)
mISDN: HFC-multi driver 2.03
e1000: 0000:00:0a.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:59:51:58
input: PC Speaker as /class/input/input3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd,
not after
USB Serial support registered for pl2303
pl2303 1-2:1.0: pl2303 converter detected
usb 1-2: pl2303 converter now attached to ttyUSB0
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
Unknown HFC multiport controller (vendor:1397 device:30b1
subvendor:ffffffff subdevice:ffffffff)
Please contact the driver maintainer for support.
ehci_hcd 0000:00:0b.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:0b.2: EHCI Host Controller
ehci_hcd 0000:00:0b.2: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:0b.2: irq 17, io mem 0xdfffff00
ehci_hcd 0000:00:0b.2: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.30.4 ehci_hcd
usb usb5: SerialNumber: 0000:00:0b.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
usb 4-2: USB disconnect, address 2
usb 5-4: new high speed USB device using ehci_hcd and address 2
usb 5-4: New USB device found, idVendor=05e3, idProduct=0605
usb 5-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-4: Product: USB2.0 Hub
usb 5-4: configuration #1 chosen from 1 choice
hub 5-4:1.0: USB hub found
hub 5-4:1.0: 4 ports detected
Adding 2008084k swap on /dev/hda5. Priority:-1 extents:1 across:2008084k
EXT3 FS on hda6, internal journal
SCSI subsystem initialized
Driver 'sr' needs updating - please use bus_type methods
Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
dm-devel at redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
NET: Registered protocol family 15
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
tun0: Disabled Privacy Extensions
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
svc: failed to register lockdv1 RPC service (errno 97).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
[drm] Initialized drm 1.1.0 20060810
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[drm] Initialized mga 3.2.1 20051102 for 0000:01:00.0 on minor 0
agpgart-via 0000:00:00.0: AGP 2.0 bridge
agpgart-via 0000:00:00.0: putting AGP V2 device into 1x mode
pci 0000:01:00.0: putting AGP V2 device into 1x mode
[drm] Initialized card for AGP DMA.