[op25-dev] {Disarmed} RE: Re: Beginner's Guide To Setting Up OP25 From Scratch

'Trunk Tracker' trunktracker@tampabay.rr.com [op25-dev] op25-dev at yahoogroups.com
Mon Dec 3 23:25:59 UTC 2018


Thanks very much.  I do like to keep anonymous online where possible, but this is all a big help.  If I type "chmod +x hills.sh", the terminal window basically does nothing and acts like I just pressed enter.  But when I run ../hills.sh, it works.

 

This is totally cooltacular.  Really enjoying it.  The audio quality is much more stable and steady than other ways of monitoring.  But it's also very quiet volume even though I've got all the volume settings all the way up.

 

The stock/default trunk.tsv file that comes with OP25 has multiple different systems in it.  So how do you tell it what system you wanna listen to?  And is there a way to tell it a talk group ID you want to hold on without having to wait until it stops on that ID, if it ever does?

 

There doesn't seem to be much of a system activity display like Unitrunker.  I found from an online thread that to adjust the scan / search delay setting, in the file trunking.py find the following line and change it from 2 seconds to something else:

 

self.TGID_HOLD_TIME = 2.0       # TODO: make more configurable

 

trunktracker at tampabay.rr.com

 

From: op25-dev at yahoogroups.com [mailto:op25-dev at yahoogroups.com] 
Sent: Sunday, December 02, 2018 4:35 PM
To: op25-dev at yahoogroups.com
Subject: RE: {Disarmed} RE: [op25-dev] Re: Beginner's Guide To Setting Up OP25 From Scratch

 

  

Correct.  This operation make the file executable.   You only need to type ../hills.sh form the terminal command line to start op25 that points to hills.tsv in the rx.py command line.    Fell free to rename these as long as you change all inferences to them.   I sent these files to you to help get started with op25 and to provide you with some examples to look at tailored to your setup and p25 system.    

 

I am available by phone is you’d like to call with any questions.   I’d be glad to help!   My phone number should have been in the signature with my PM containing the hills files. If not, email me offline ant I will provide it to you.

 

Bill

 

 

 

From: op25-dev at yahoogroups.com <op25-dev at yahoogroups.com> 
Sent: Sunday, December 2, 2018 1:02 PM
To: op25-dev at yahoogroups.com
Subject: Re: {Disarmed} RE: [op25-dev] Re: Beginner's Guide To Setting Up OP25 From Scratch

 

  

Type that in terminal. Make sure you're in the directory with the hills.sh file.

On Sun, Dec 2, 2018, 12:22 PM 'Trunk Tracker' trunktracker at tampabay.rr.com [op25-dev] <op25-dev at yahoogroups.com wrote:

  

So, what this " chmod +x hills.sh"?  Do I type that somewhere?

 

trunktracker at tampabay.rr.com

 

From: op25-dev at yahoogroups.com [mailto:op25-dev at yahoogroups.com] 
Sent: Saturday, December 01, 2018 6:21 PM
To: op25-dev at yahoogroups.com
Subject: RE: {Disarmed} RE: [op25-dev] Re: Beginner's Guide To Setting Up OP25 From Scratch

 

  

Don’t forget the chmod +x hills.sh before trying to execute it.   

 

Bill

 

 

From: op25-dev at yahoogroups.com <op25-dev at yahoogroups.com> 
Sent: Saturday, December 1, 2018 5:04 PM
To: op25-dev at yahoogroups.com
Subject: RE: {Disarmed} RE: [op25-dev] Re: Beginner's Guide To Setting Up OP25 From Scratch

 

  

Ah, yes..  They came through.  Let me try'em.  Thanks.

 

trunktracker at tampabay.rr.com

 

From: op25-dev at yahoogroups.com [mailto:op25-dev at yahoogroups.com] 
Sent: Saturday, December 01, 2018 5:58 PM
To: op25-dev at yahoogroups.com
Subject: RE: {Disarmed} RE: [op25-dev] Re: Beginner's Guide To Setting Up OP25 From Scratch

 

  

Trunktracker,

 

I sent you all the configuration files you needed to start monitoring Hillsborough County earlier today via private email.   Did you not get them?

 

Your HillsboroughWest.tsv file shown below is a “Tag” file that associates system talkgroups with a name or tag.    This file gets called from inside of trunk.tsv or whatever you 

want to name it as long as your call it with the -T xxxx.tsv from your rx..py command line.

 

Let me know if you haven’t receive the files I sent.

 

There were:       hills.sh

                             hills.tsv

                             hills-tgids.tsv

 

Bill

 

 

From: op25-dev at yahoogroups.com <op25-dev at yahoogroups.com> 
Sent: Saturday, December 1, 2018 4:49 PM
To: op25-dev at yahoogroups.com <mailto:op25-dev at yahoogroups..com> 
Subject: RE: {Disarmed} RE: [op25-dev] Re: Beginner's Guide To Setting Up OP25 From Scratch

 

 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/op25-dev/attachments/20181203/6f00ae66/attachment-0001.html>


More information about the op25-dev mailing list