This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/op25-dev@lists.osmocom.org/.
gnorbury@bondcar.com [op25-dev] op25-dev at yahoogroups.comThere's really little impact having "-2" enabled even when there isn't any phase 2 traffic. Additional processing overhead is pretty small as it only tries to match the frame sync id. Conversely, there is considerable benefit to reducing the sample size (-S), especially on lower spec hardware. You only need to have it wide enough to receive one channel (57600 works well on a RPi3, 960000 and 1440000 are good on PCs). The only reason to go bigger is to see "more stuff" on the FFT plot, but it won't make op25 perform significantly better unless your entire trunked system fits within the 2.5Mhz RTL bandwidth allowing you to use center tuning. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/op25-dev/attachments/20181119/8db61fb2/attachment.htm>