This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/op25-dev@lists.osmocom.org/.
Matt Ames matt.ames7bc@gmail.com [op25-dev] op25-dev at yahoogroups.comHi Bill, trunk.csv isn't required for conventional. Here's a few exmaple commands I have used with my USRPs (via UHD) and airspy:- ../rx.py -S 2500000 -o 50000 -q 2 -f 434075000 --args 'uhd' -D fsk4 -P fft --gains 'PGA:10' ../rx.py -S 1000000 -o 50000 -q 39 -f 434075000 --args 'uhd' --gains 'PGA:40' ../rx.py -S 2500000 -o 50000 -q 2 -f 438187500 --args 'airspy' -D fsk4 -P fft --gains 'MIX:5' /rx.py -S 1000000 -o 50000 -q 2 -f 438187500 --args 'uhd' -D fsk4 -P fft --gains 'PGA:30' Cheers, Matt On 19 December 2017 at 09:06, 'William Becks' wa8wg at centurytel.net [op25-dev] <op25-dev at yahoogroups.com> wrote: > > > OK. How does one setup the rx.py command line and/or trunk.tsv file if > required to monitor conventional traffic? Can you please post example > configuration? > > > > Thank you, > > > > Bill, WA8WG > > > > > > *From:* op25-dev at yahoogroups.com [mailto:op25-dev at yahoogroups.com] > *Sent:* Monday, December 18, 2017 2:43 PM > *To:* op25-dev at yahoogroups.com > *Subject:* Re: [op25-dev] Recent changes > > > > > > rx.py can already monitor conventional traffic. In fact this feature was > there before trunking was. > > > > On Tue, 19 Dec 2017 at 06:55, 'William Becks' wa8wg at centurytel.net > [op25-dev] <op25-dev at yahoogroups.com> wrote: > > > > Graham, > > > > Thank you so much for your efforts in the continuing development of op25. > Especially for the recent coding changes allowing for FQDN --wireshark-host > command line entry. The addition of the --nocrypt function was very > innovative and solved an issue in my area where some talkgroups use a mix > of clear, and encrypted transmissions that were previously impossible to > reject without also filtering the clear voice transmissions as well.. > > > > I am personally very grateful for the work that you and Max have done to > improve the code. If I could wish for one new feature, it would be to > incorporate code allowing rx.py to monitor conventional IMBE non-trunked > transmissions. Such a feature would be great for monitoring small > non-trunked systems in addition to providing a great resource to monitor > and analyze amateur P25 transmissions from MMDVM and similar devices. > > > > Keep up the good work and best of holiday greetings! > > > > Bill, WA8WG > > > > > > *From:* op25-dev at yahoogroups.com [mailto:op25-dev at yahoogroups.com] > *Sent:* Saturday, December 16, 2017 7:08 PM > *To:* op25-dev at yahoogroups.com > *Subject:* [op25-dev] Recent changes > > > > > > For my version of op25 I've just pushed a change to support using > hostnames/fully qualified domain names (or straight IP addresses) in the > --wireshark-host command line parameter (-W). > > Earlier changes include the addition of the source radio id (where > available) to the terminal screen, as well as indication of when encryption > is active (only applies when using --nocrypt command line option). > > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/op25-dev/attachments/20171219/4efba635/attachment.htm>