[op25-dev] Unable to Run scope.py

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/op25-dev@lists.osmocom.org/.

Sean Kealy superstardodge@yahoo.com [op25-dev] op25-dev at yahoogroups.com
Wed Feb 1 03:45:28 UTC 2017


Almost seems like it doesn't like your RTL , try running scope with the if or disc tap command and see if it comes up



--------------------------------------------
On Tue, 1/31/17, Brett Friermood brett.friermood at gmail.com [op25-dev] <op25-dev at yahoogroups.com> wrote:

 Subject: Re: [op25-dev] Unable to Run scope.py
 To: op25-dev at yahoogroups.com
 Received: Tuesday, January 31, 2017, 6:41 PM
 
 I did. "sudo rmmod
 dvb_usb_rtl28xxu" outputs "rmmod: ERROR: Module
 dvb_usb_rtl28xxu is not currently
 loaded"
 
 This was a
 fresh install of OP25 on this computer. I am able to run
 osmocom_fft without issue.
 
 On Tue, Jan 31, 2017 at 8:19 PM, Sean Kealy superstardodge at yahoo.com
 [op25-dev] <op25-dev at yahoogroups.com>
 wrote:
 
 >
 >
 > Did you do the remove
 modprobe command?
 >
 >
 > On Tuesday, January
 31, 2017 2:18 PM, "Brett Friermood
 >
 brett.friermood at gmail.com
 [op25-dev]" <op25-dev at yahoogroups.com>
 wrote:
 >
 >
 >
 > I may have
 misinterpreted your question thinking you were asking if
 the
 > error comes up rather than asking
 if the GUI comes up.
 >
 > If I run scope.py without any arguments I
 still get the same error. Any
 > manner of
 command line arguments produces the same error.
 >
 > On Sun, Jan 29, 2017
 at 10:27 AM, Sean Kealy superstardodge at yahoo.com
 > [op25-dev] <op25-dev at yahoogroups.com>
 wrote:
 >
 >
 >
 > If  u run just
 ./scope.py does it come up
 >
 >
 >
 ------------------------------ --------------
 > On Sat, 1/28/17, Brett Friermood brett.friermood at gmail.com
 [op25-dev] <
 > op25-dev at yahoogroups.com>
 wrote:
 >
 >  Subject:
 [op25-dev] Unable to Run scope.py
 >  To:
 op25-dev at yahoogroups.com
 >  Received: Saturday, January 28, 2017,
 2:06 PM
 >
 >  BretJust
 built OP25 on
 >  Debian Jessie without
 issue. However when I try to
 >  run a
 simple scope command it fails with the
 >  following error:
 >
 >  Traceback
 >  (most
 recent call last):
 >    File
 >  "./scope.py", line 2751, in
 <module>
 >      app =
 stdgui2.stdapp(p25_rx_block,
 > 
 "APCO P25 Receiver", 3)
 >   
 File
 >  "/usr/lib/python2.7/dist-
 packages/gnuradio/wxgui/ stdgui2.py",
 >  line
 >  46, in
 __init__
 >
 > 
 wx.App.__init__ (self, redirect=False)
 >
 >  File
 >  "/usr/lib/python2.7/dist-
 packages/wx-3.0-gtk2/wx/_core. py",
 >  line
 >  8628, in
 __init__
 >
 > 
 self._BootstrapApp()
 >    File
 >  "/usr/lib/python2.7/dist-
 packages/wx-3.0-gtk2/wx/_core. py",
 >  line
 >  8196, in
 _BootstrapApp
 >      return
 _core_.PyApp__BootstrapApp(* args,
 > 
 **kwargs)
 >    File
 >  "/usr/lib/python2.7/dist-
 packages/gnuradio/wxgui/ stdgui2.py",
 >  line
 >  49, in
 OnInit
 >
 >  frame =
 stdframe (self.top_block_maker, self.title,
 >  self._nstatus)
 >   
 File
 >  "/usr/lib/python2.7/dist-
 packages/gnuradio/wxgui/ stdgui2.py",
 >  line
 >  76, in
 __init__
 >
 > 
 self.panel = stdpanel (self, self, top_block_maker)
 >    File
 > 
 "/usr/lib/python2.7/dist- packages/gnuradio/wxgui/
 stdgui2.py",
 >  line
 >  98, in __init__
 >
 >  self.top_block = top_block_maker (frame,
 self, vbox,
 >  sys.argv)
 >    File "./scope.py",
 >  line 212, in __init__
 >
 > 
 self.__init_gui(frame, panel, vbox)
 > 
   File
 >  "./scope.py", line
 466, in __init_gui
 >     
 self.frame.CreateStatusBar()
 >   
 File
 >  "/usr/lib/python2.7/dist-
 packages/wx-3.0-gtk2/wx/_ windows.py",
 >  line
 >  615, in
 CreateStatusBar
 >      return
 >  _windows_.Frame_ CreateStatusBar(*args,
 **kwargs)
 >  wx._core.PyAssertionError:
 C++ assertion
 > 
 "!m_frameStatusBar" failed at
 >  ../src/common/framecmn.cpp( 381) in
 >
 >  CreateStatusBar():
 recreating status bar
 >  in
 >  wxFrame
 >
 >
 >  The command I am
 running is simply
 >  "./scope.py -f
 152.5925e6". Other
 >  references to
 this error that I have been able
 >  to
 find appeared to all be
 >  resolved
 by
 >  adding or properly formatting the
 NAC in the trunk.tsv
 >  file.
 >  Scope.py properly finds the SDR
 >  dongle, and will set the gain if I
 provide
 >  the argument, but always
 fails with this error
 >  and never opens
 the GUI. I'm
 >  sure
 >  I'm missing something simple.
 >
 >
 >  Thanks,
 >
 >  Brett
 >
 >
 >
 >
 ------------------------------ ------
 >
 Posted by: Sean Kealy <superstardodge at yahoo.com>
 > ------------------------------ ------
 >
 >
 >
 ------------------------------ ------
 >
 > Yahoo Groups Links
 >
 >
 >     (Yahoo! ID required)
 >
 > <op25-dev-fullfeatured at yahoogroups.com>
 >
 >
 >
 >
 >
 >
 >
 >
 >
 
 >
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/op25-dev/attachments/20170201/8b279c62/attachment.htm>


More information about the op25-dev mailing list