[op25-dev] OP25 and WireShark Help

Matt Doolittle md123 at nycap.rr.com
Tue Jan 29 17:37:19 UTC 2013


My OP25 runs but doesn't show up in GNUradio.  Either does the FSK4 decoder or wireshark.  Should these all be showing up in the GNUradio blocks tree?  I was under the impression that OP25 was block that had to be used in GNU radio.  Need some giudance please.
Thanks a bunch,
Matt

"Robert Klamp Jr." <RobertKlamp at aol.com> wrote:

>I have what is supposed to be a working copy on a thumb drive I copy the SRC file over to my Home folder. The SCR folder contains 4 folders GNURadio-3.2.2, GR-FSK4, OP25, and OLD I can post a link to it if it will help. I then open a terminal and run the command lines to start it: cd ~/src/op25/python-à./audio_p25_rx.py –a and I get this errorà
>
> 
>
>bob at ubuntu:~$ cd ~/src/op25/python
>
>bob at ubuntu:~/src/op25/python$ ./audio_p25_rx.py -a
>
> 
>
>Traceback (most recent call last):
>
>  File "./audio_p25_rx.py", line 34, in <module>
>
>    from gnuradio import audio, eng_notation, fsk4, gr, gru, op25
>
>ImportError: cannot import name fsk4
>
>bob at ubuntu:~/src/op25/python$ 
>
>bob at ubuntu:~/src/op25/python$
>
> 
>
>I will try and install from scratch but I get the same error plus a few others, any way any help is appreciated and please let me know if you need more info. As for the system I am running Ubuntu 10.04 with VMware player on a windows 7 64 bit machine with a AMD processor.
>
> 
>
>Thanks Again,
>
>Bob
>
> 
>
>From: op25-dev at yahoogroups.com [mailto:op25-dev at yahoogroups.com] On Behalf Of ikjtel
>Sent: Tuesday, January 29, 2013 7:46 AM
>To: op25-dev at yahoogroups.com
>Subject: Re: [op25-dev] OP25 and WireShark Help
>
> 
>
>  
>
> 
>
>Robert
>
> 
>
>Not a lot of info here to go on.
>
> 
>
>We'd need you to post the specific error messages you're receiving - otherwise it won't be possible to arrive at a diagnosis.
>
> 
>
>Max
>
> 
>
>  _____  
>
>From: rbrtklamp <RobertKlamp at aol.com>
>To: op25-dev at yahoogroups.com 
>Sent: Tuesday, January 29, 2013 5:13 AM
>Subject: [op25-dev] OP25 and WireShark Help
>
> 
>
>  
>
>Has anybody had any luck getting OP25 to work. I have been going crazy trying to get this program installed and running but it always gives me errors. I have tried ubuntu 9.10 but they no longer release or update any packages for that version anymore. So now I am on to Ubuntu 10.04 GNUradio installs fine but I get a ton of errors when trying to install OP25. My end game is to be able to use OP25 with wire shark to review the data packets. Right now I am at a loss, I am not very Linux literate and really have a almost no knowledge on how the operating system works. I should add I installed and use DSD just fine, thats why this op25 thing is driving me crazy I follow every part of the building instructions to the T and still get errors and missing pieces. I am at the point that I am willing to pay somebody for their time if someone would be kind enough to contact me directly I will give you my phone number and we can go from there. Just let me know what I owe you for your time and I will paypal it over to you. Bottom line is I NEED to get this program up and running with wire shark for a project me and some Friends are working on. Any help would be very much appreciated and I am more than happy to compensate any for their time if somebodies willing to walk me through the set-up and figure out why I cant get it running. PLEASE HELP! Any one interested can contact me here directly at the email address below.
>
>Thank you all for your time,
>Robert Klamp
>RobertKlamp at Comcast dot net
>
> 
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/op25-dev/attachments/20130129/abb407a5/attachment.html>


More information about the op25-dev mailing list