This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/op25-dev@lists.osmocom.org/.
Zach Wasserman zachwass2000 at gmail.comIt would help you greatly to check out section 3 of this document: http://heather.cs.ucdavis.edu/~matloff/UnixAndC/Unix/UnixBareMn.pdf On Tue, Jan 29, 2013 at 6:04 PM, Robert Klamp Jr. <RobertKlamp at aol.com>wrote: > ** > > > I have to apologize, I am not that great with Ubuntu. Could you please > explain the first part about using the cd command and what I am supposed to > type in. I am very lost not understanding Linux that well, are you saying > to type cd chdir src/grfsk4 into the terminal window and then run bootstrap > and configure? I am so lost, please anybody responding understand I am new > to Linux and have a lot of learning to do.**** > > ** ** > > Thanks,**** > > Bob**** > > ** ** > > *From:* op25-dev at yahoogroups.com [mailto:op25-dev at yahoogroups.com] *On > Behalf Of *ikjtel > *Sent:* Tuesday, January 29, 2013 2:50 PM > > *To:* op25-dev at yahoogroups.com > *Subject:* Re: [op25-dev] OP25 and WireShark Help**** > > ** ** > > **** > > you have the source dir for gr-fsk4 - good. Use the cd command the chdir > to that dir (src/gr-fsk4) and then do**** > > ** ** > > sh bootstrap**** > > ./configure**** > > make**** > > make install**** > > ** ** > > Max**** > ------------------------------ > > *From:* Robert Klamp Jr. <RobertKlamp at aol.com> > *To:* op25-dev at yahoogroups.com > *Sent:* Tuesday, January 29, 2013 9:10 AM > *Subject:* RE: [op25-dev] OP25 and WireShark Help**** > > ** ** > > **** > > I have what is supposed to be a working copy on a thumb drive I copy the > SRC file over to my Home folder. The SCR folder contains 4 folders > GNURadio-3.2.2, GR-FSK4, OP25, and OLD I can post a link to it if it will > help. I then open a terminal and run the command lines to start it: cd > ~/src/op25/python-à./audio_p25_rx.py –a and I get this errorà**** > > **** > > bob at ubuntu:~$ cd ~/src/op25/python**** > > bob at ubuntu:~/src/op25/python$ ./audio_p25_rx.py -a**** > > **** > > Traceback (most recent call last):**** > > File "./audio_p25_rx.py", line 34, in <module>**** > > from gnuradio import audio, eng_notation, fsk4, gr, gru, op25**** > > ImportError: cannot import name fsk4**** > > bob at ubuntu:~/src/op25/python$ **** > > bob at ubuntu:~/src/op25/python$**** > > **** > > I will try and install from scratch but I get the same error plus a few > others, any way any help is appreciated and please let me know if you need > more info. As for the system I am running Ubuntu 10.04 with VMware player > on a windows 7 64 bit machine with a AMD processor.**** > > **** > > Thanks Again,**** > > Bob**** > > **** > > *From:* op25-dev at yahoogroups.com [mailto:op25-dev at yahoogroups.com<op25-dev at yahoogroups.com>] > *On Behalf Of *ikjtel > *Sent:* Tuesday, January 29, 2013 7:46 AM > *To:* op25-dev at yahoogroups.com > *Subject:* Re: [op25-dev] OP25 and WireShark Help**** > > **** > > **** > > **** > > Robert**** > > **** > > Not a lot of info here to go on.**** > > **** > > We'd need you to post the specific error messages you're receiving - > otherwise it won't be possible to arrive at a diagnosis.**** > > **** > > Max**** > > **** > ------------------------------ > > *From:* rbrtklamp <RobertKlamp at aol.com> > *To:* op25-dev at yahoogroups.com > *Sent:* Tuesday, January 29, 2013 5:13 AM > *Subject:* [op25-dev] OP25 and WireShark Help**** > > **** > > **** > > Has anybody had any luck getting OP25 to work. I have been going crazy > trying to get this program installed and running but it always gives me > errors. I have tried ubuntu 9.10 but they no longer release or update any > packages for that version anymore. So now I am on to Ubuntu 10.04 GNUradio > installs fine but I get a ton of errors when trying to install OP25. My end > game is to be able to use OP25 with wire shark to review the data packets. > Right now I am at a loss, I am not very Linux literate and really have a > almost no knowledge on how the operating system works. I should add I > installed and use DSD just fine, thats why this op25 thing is driving me > crazy I follow every part of the building instructions to the T and still > get errors and missing pieces. I am at the point that I am willing to pay > somebody for their time if someone would be kind enough to contact me > directly I will give you my phone number and we can go from there. Just let > me know what I owe you for your time and I will paypal it over to you. > Bottom line is I NEED to get this program up and running with wire shark > for a project me and some Friends are working on. Any help would be very > much appreciated and I am more than happy to compensate any for their time > if somebodies willing to walk me through the set-up and figure out why I > cant get it running. PLEASE HELP! Any one interested can contact me here > directly at the email address below. > > Thank you all for your time, > Robert Klamp > RobertKlamp at Comcast dot net**** > > **** > > ** ** > > **** > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/op25-dev/attachments/20130129/5403bcd8/attachment.htm>