I: Re: How to build Wireshark-1.6.7 against patched libpcap

chiccus2003 at libero.it chiccus2003 at libero.it
Sat May 12 08:54:41 UTC 2012


Hi Samuel,

I followed your instructions, but nothing.

I built and install in directory /usr/src the:
patched libpcap + libnl + libdect

The headers + pcap.h of patched libpcap and of libnl are installed in 
directory:
/usr/src and also /usr/local/include

I do:

cd /usr/src/wireshark-1.6.7
sudo  ./autogen.sh

I tried all the following directory:

-sudo ./configure –with-pcap=/usr/local
-sudo ./configure –with-pcap=/usr/local/include
-sudo ./configure –with-pcap=/usr/local/include/pcap
-sudo ./configure –with-pcap=/usr/local/include/pcap/pcap.h
-sudo ./configure –with-pcap=/usr/local/lib
-sudo ./configure –with-pcap=/usr/src/libpcap
		
but nothing, I get always the following error:

........
checking for connect... yes
checking whether to use libpcap for packet capture... yes
checking pcap.h usability... yes
checking pcap.h presence... yes
checking for pcap.h... yes
checking for pcap_open_live in -lpcap... no
checking for pcap_open_live in -lpcap with -lcfg -lodm... no
checking for pcap_open_live in -lpcap with -lpfring... no
configure: error: Can't link with library libpcap.

If instead I run ONLY “./configure” is OK, but then if I run “sudo wireshark” 
can not find the 
interface dect.
There are only interfaces: "any" - "lo" - "usb0".

There is something that does not work (sorry for bad english).

Some ideas?

(Pci card installed)

With best regards,

Umberto


>----Messaggio originale----
>Da: chiccus2003 at libero.it
>Data: 08/05/2012 11.45
>A: <samuel at sieb.net>, <linux-dect at lists.osmocom.org>
>Ogg: R: Re: How to build Wireshark-1.6.7 against patched libpcap
>
>Hi Samuel,
>
>thank you for your help.
>
>I will try to follow your information.
>
>With best regards,
>
>Umberto
>
>>----Messaggio originale----
>>Da: samuel at sieb.net
>>Data: 06/05/2012 6.13
>>A: <linux-dect at lists.osmocom.org>
>>Ogg: Re: How to build Wireshark-1.6.7 against patched libpcap
>>
>>chiccus2003 at libero.it wrote:
>>>
>>> The patched libpcap + libnl +libdect are built and installed in 
directory:
>>> umberto at umberto-desktop:/usr/src/tools
>>>
>>They're installed there, or they're installed in /usr/local?  Make sure 
you 
>know 
>>exactly where the library and the headers were installed.
>>>
>>> I do:
>>>
>>> cd wireshark-1.6.7$ sudo ./configure --with-pcap=/usr/local/lib
>>>
>>If you've installed them using the defaults, try --with-pcap=/usr/local 
>instead.
>>
>>
>
>
>
>






More information about the linux-dect mailing list