debt 6.0 rf band

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/linux-dect@lists.osmocom.org/.

Patrick McHardy kaber at trash.net
Thu Aug 9 19:18:47 UTC 2012


On Thu, 9 Aug 2012, Frédéric LECAILLE wrote:

>
> On Aug 9, 2012, at 12:20 AM, Patrick McHardy wrote:
>
>> Updated patch attached
>> <usdect.diff>
>
> Ok thank you a lot Patrick.
>
> Here are the results:
>
> with your last patch:
>
> dect-transceiver-list --name trx0
> DECT Transceiver trx0 at cell0:
> 	Type: vtrx
> 	RF-band: 00000
> 	Events: busy: 0 late: 0
>
> 	slot 0: <scanning> packet: P00 carrier: 27 (0.000 MHz)
> 	    RX: bytes 0 packets 0 a-crc-errors 0 x-crc-errors 0 z-crc-errors 0
> 	    TX: bytes 0 packets 0
>
> *The frequency is always 0 MHz*
>
> The kernel logs seems to be OK:
>
> [15122.889144] vtrx trx0: set carrier: slot: 0 carrier: 23
> [15122.899150] vtrx trx0: set carrier: slot: 0 carrier: 24
> [15122.909150] vtrx trx0: set carrier: slot: 0 carrier: 25
> [15122.919151] vtrx trx0: set carrier: slot: 0 carrier: 26
> [15122.929150] vtrx trx0: set carrier: slot: 0 carrier: 27
>
>
> So I have tried your last patch with mine to force the rf_band to 1:

Right, it's supposed to be band 1.

> dect-transceiver-list --name trx0
> DECT Transceiver trx0 at cell0:
> 	Type: vtrx
> 	RF-band: 00001
> 	Events: busy: 0 late: 0
>
> 	slot 0: <scanning> packet: P00 carrier: 23 (1921.536 MHz)
> 	    RX: bytes 0 packets 0 a-crc-errors 0 x-crc-errors 0 z-crc-errors 0
> 	    TX: bytes 0 packets 0
>
>
> The channel seems to be ok, but no station are visible during scanning…
> My contact in USA is not present, perhaps he is not at home… do not know if its station is on...

Well, on vtrx you're not going to see stations unless you start some
yourself.


More information about the linux-dect mailing list