This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/linux-dect@lists.osmocom.org/.
Frédéric LECAILLE frednews78 at free.frif my analyze is correct, the virtual interface vtrx is scanning, not the physical one… as fat as I understand the command outputs… On Aug 9, 2012, at 8:02 PM, Frédéric LECAILLE wrote: > > On Aug 9, 2012, at 12:20 AM, Patrick McHardy wrote: > >> Updated patch attached >> <usdect.diff> > > Ok thank you a lot Patrick. > > Here are the results: > > with your last patch: > > dect-transceiver-list --name trx0 > DECT Transceiver trx0 at cell0: > Type: vtrx > RF-band: 00000 > Events: busy: 0 late: 0 > > slot 0: <scanning> packet: P00 carrier: 27 (0.000 MHz) > RX: bytes 0 packets 0 a-crc-errors 0 x-crc-errors 0 z-crc-errors 0 > TX: bytes 0 packets 0 > > *The frequency is always 0 MHz* > > The kernel logs seems to be OK: > > [15122.889144] vtrx trx0: set carrier: slot: 0 carrier: 23 > [15122.899150] vtrx trx0: set carrier: slot: 0 carrier: 24 > [15122.909150] vtrx trx0: set carrier: slot: 0 carrier: 25 > [15122.919151] vtrx trx0: set carrier: slot: 0 carrier: 26 > [15122.929150] vtrx trx0: set carrier: slot: 0 carrier: 27 > > > So I have tried your last patch with mine to force the rf_band to 1: > > dect-transceiver-list --name trx0 > DECT Transceiver trx0 at cell0: > Type: vtrx > RF-band: 00001 > Events: busy: 0 late: 0 > > slot 0: <scanning> packet: P00 carrier: 23 (1921.536 MHz) > RX: bytes 0 packets 0 a-crc-errors 0 x-crc-errors 0 z-crc-errors 0 > TX: bytes 0 packets 0 > > > The channel seems to be ok, but no station are visible during scanning… > My contact in USA is not present, perhaps he is not at home… do not know if its station is on... > > > About trx2: > > dect-transceiver-list --name trx2 > DECT Transceiver trx2: > Type: sc1442x > Features: slow-hopping,p64 > RF-band: 00001 > Events: busy: 0 late: 0 > > slot 0: <idle> > RX: bytes 0 packets 0 a-crc-errors 0 x-crc-errors 0 z-crc-errors 0 > TX: bytes 0 packets 0 > > (no a-crc-errors) > > If I remember well, with only my patch which forces the rf_band to 3 we got for trx2: > > dect-transceiver-list --name trx2 I see that slot0 is scanning: > > DECT Transceiver trx2 at cell0: > Type: sc1442x > Features: slow-hopping,p64 > RF-band: 00003 > Events: busy: 0 late: 0 > > slot 0: <scanning> packet: P00 carrier: 5 (1888.704 MHz) > RX: bytes 0 packets 0 a-crc-errors 1629 x-crc-errors 0 z-crc-errors 0 > > > > > > > >