Change in osmo-bts[master]: BS Power Control Loop: refactor lchan_bs_pwr_ctrl() to look similar t...

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.

pespin gerrit-no-reply at lists.osmocom.org
Mon Sep 6 10:06:38 UTC 2021


pespin has submitted this change. ( https://gerrit.osmocom.org/c/osmo-bts/+/25334 )

Change subject: BS Power Control Loop: refactor lchan_bs_pwr_ctrl() to look similar to lchan_ms_pwr_ctrl()
......................................................................

BS Power Control Loop: refactor lchan_bs_pwr_ctrl() to look similar to lchan_ms_pwr_ctrl()

This commit reworks the code in function lchan_bs_pwr_ctrl()
and logging to look similar to that of lchan_ms_pwr_ctrl(), so that
reader can easily spot similarities between both and add simillar
features more easily.

This commit is also a preparation to add EWMA avg support for RxQual
measurements. Logging is also reworked now to look similar to that of MS
Power Control Loop, because having several parameters driving the algo
(RxLev and RxQual), it becomes more suitable to log all of them together instead
of intermediate info only aplicable to one param such as "delta".

Change-Id: Ida76b55f0da722135eb61ed06ea2b3a1862df600
---
M src/common/power_control.c
M tests/power/bs_power_loop_test.err
2 files changed, 138 insertions(+), 149 deletions(-)

Approvals:
  Jenkins Builder: Verified
  laforge: Looks good to me, but someone else must approve
  osmith: Looks good to me, but someone else must approve
  pespin: Looks good to me, approved



diff --git a/src/common/power_control.c b/src/common/power_control.c
index d23153f..4c3ff89 100644
--- a/src/common/power_control.c
+++ b/src/common/power_control.c
@@ -287,8 +287,8 @@
 	uint8_t rxqual_full, rxqual_sub;
 	uint8_t rxlev_full, rxlev_sub;
 	uint8_t rxqual, rxlev;
-	int8_t dl_rssi_dbm_avg;
-	int delta, new;
+	int8_t dl_rssi_dbm, dl_rssi_dbm_avg;
+	int new_att;
 
 	/* Check if dynamic BS Power Control is enabled */
 	if (params == NULL)
@@ -341,68 +341,54 @@
 		rxlev = rxlev_full;
 	}
 
-	dl_rssi_dbm_avg = do_avg_algo(&params->rxlev_meas, &state->rxlev_meas_proc, rxlev2dbm(rxlev));
-
+	dl_rssi_dbm = rxlev2dbm(rxlev);
+	dl_rssi_dbm_avg = do_avg_algo(&params->rxlev_meas, &state->rxlev_meas_proc, dl_rssi_dbm);
 	/* If RxQual > L_RXQUAL_XX_P, try to increase Tx power */
 	if (rxqual > params->rxqual_meas.lower_thresh) {
-		uint8_t old = state->current;
-
-		/* Tx power has reached the maximum, nothing to do */
-		if (state->current == 0)
-			return 0;
-
 		/* Increase Tx power by reducing Tx attenuation */
-		if (state->current >= params->inc_step_size_db)
-			state->current -= params->inc_step_size_db;
-		else
-			state->current = 0;
-
-		LOGPLCHAN(lchan, DLOOP, LOGL_INFO, "Reducing Downlink attenuation: "
-			  "%u -> %d dB due to RxQual %u worse than L_RXQUAL_XX_P %u\n",
-			  old, state->current, rxqual, params->rxqual_meas.lower_thresh);
-		return 1;
+		new_att = state->current - params->inc_step_size_db;
+	} else {
+		/* Basic signal transmission / reception formula:
+		 *
+		 *   RxLev = TxPwr - (PathLoss + TxAtt)
+		 *
+		 * Here we want to change RxLev at the MS side, so:
+		 *
+		 *   RxLev + Delta = TxPwr - (PathLoss + TxAtt) + Delta
+		 *
+		 * The only parameter we can change here is TxAtt, so:
+		 *
+		 *   RxLev + Delta = TxPwr - PathLoss -  TxAtt + Delta
+		 *   RxLev + Delta = TxPwr - PathLoss - (TxAtt - Delta)
+		 */
+		new_att = state->current - calc_delta_rxlev(params, state, dl_rssi_dbm_avg);
 	}
 
-	/* Calculate a 'delta' for the current attenuation level */
-	delta = calc_delta_rxlev(params, state, dl_rssi_dbm_avg);
+	/* Make sure new TxAtt is never negative: */
+	if (new_att < 0)
+		new_att = 0;
 
-	/* Basic signal transmission / reception formula:
-	 *
-	 *   RxLev = TxPwr - (PathLoss + TxAtt)
-	 *
-	 * Here we want to change RxLev at the MS side, so:
-	 *
-	 *   RxLev + Delta = TxPwr - (PathLoss + TxAtt) + Delta
-	 *
-	 * The only parameter we can change here is TxAtt, so:
-	 *
-	 *   RxLev + Delta = TxPwr - PathLoss -  TxAtt + Delta
-	 *   RxLev + Delta = TxPwr - PathLoss - (TxAtt - Delta)
-	 */
-	new = state->current - delta;
-	if (new > state->max)
-		new = state->max;
-	if (new < 0)
-		new = 0;
+	/* Don't ask for higher TxAtt than permitted:  */
+	if (new_att > state->max)
+		new_att = state->max;
 
-	if (state->current != new) {
-		LOGPLCHAN(lchan, DLOOP, LOGL_INFO, "Changing Downlink attenuation: "
-			  "%u -> %u dB (maximum %u dB, suggested delta %d dB, "
-			  "RxLev current %u (%d dBm), thresholds %u .. %u)\n",
-			  state->current, new, state->max,
-			  -delta, rxlev, rxlev2dbm(rxlev),
-			  params->rxlev_meas.lower_thresh,
-			  params->rxlev_meas.upper_thresh);
-		state->current = new;
-		return 1;
-	} else {
-		LOGPLCHAN(lchan, DLOOP, LOGL_INFO, "Keeping Downlink attenuation "
-			  "at %u dB (maximum %u dB, suggested delta %d dB, "
-			  "RxLev current %u (%d dBm), thresholds %u .. %u)\n",
-			  state->current, state->max,
-			  -delta, rxlev, rxlev2dbm(rxlev),
-			  params->rxlev_meas.lower_thresh,
-			  params->rxlev_meas.upper_thresh);
+	if (state->current == new_att) {
+		LOGPLCHAN(lchan, DLOOP, LOGL_INFO, "Keeping DL attenuation at %u dB: "
+			  "max %u dB, RSSI[curr %d, avg %d, thresh %d..%d] dBm, "
+			  "RxQual[curr %d, thresh %d..%d]\n",
+			  state->current,  state->max, dl_rssi_dbm, dl_rssi_dbm_avg,
+			  rxlev2dbm(params->rxlev_meas.lower_thresh), rxlev2dbm(params->rxlev_meas.upper_thresh),
+			  rxqual, params->rxqual_meas.lower_thresh, params->rxqual_meas.upper_thresh);
 		return 0;
 	}
+
+	LOGPLCHAN(lchan, DLOOP, LOGL_INFO, "%s DL attenuation %u dB => %u dB:"
+		  "max %u dB, RSSI[curr %d, avg %d, thresh %d..%d] dBm, "
+		   "RxQual[curr %d, thresh %d..%d]\n",
+		  (new_att > state->current) ? "Raising" : "Lowering",
+		  state->current, new_att, state->max, dl_rssi_dbm, dl_rssi_dbm_avg,
+		  rxlev2dbm(params->rxlev_meas.lower_thresh), rxlev2dbm(params->rxlev_meas.upper_thresh),
+		  rxqual, params->rxqual_meas.lower_thresh, params->rxqual_meas.upper_thresh);
+	state->current = new_att;
+	return 1;
 }
diff --git a/tests/power/bs_power_loop_test.err b/tests/power/bs_power_loop_test.err
index c4726b1..6af6c3f 100644
--- a/tests/power/bs_power_loop_test.err
+++ b/tests/power/bs_power_loop_test.err
@@ -1,196 +1,199 @@
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 0 -> 2 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 0 dB => 2 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 2 -> 4 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 2 dB => 4 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 4 -> 6 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 4 dB => 6 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 6 -> 8 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 6 dB => 8 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 8 -> 10 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 8 dB => 10 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 10 -> 12 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 10 dB => 12 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 12 -> 14 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 12 dB => 14 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 14 -> 16 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 14 dB => 16 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 16 -> 18 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 16 dB => 18 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 18 -> 20 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 18 dB => 20 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 20 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 20 dB: max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 20 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 20 dB: max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 20 -> 16 dB (maximum 20 dB, suggested delta -4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 20 dB => 16 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 16 -> 12 dB (maximum 20 dB, suggested delta -4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 16 dB => 12 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 12 -> 8 dB (maximum 20 dB, suggested delta -4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 12 dB => 8 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 8 -> 4 dB (maximum 20 dB, suggested delta -4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 8 dB => 4 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 4 -> 0 dB (maximum 20 dB, suggested delta -4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 4 dB => 0 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, suggested delta -4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, suggested delta -4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 0 -> 4 dB (maximum 20 dB, suggested delta 4 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 0 dB => 4 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 4 -> 8 dB (maximum 20 dB, suggested delta 4 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 4 dB => 8 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 8 -> 12 dB (maximum 20 dB, suggested delta 4 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 8 dB => 12 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 12 -> 16 dB (maximum 20 dB, suggested delta 4 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 12 dB => 16 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 16 -> 20 dB (maximum 20 dB, suggested delta 4 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 16 dB => 20 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 20 dB (maximum 20 dB, suggested delta 4 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 20 dB: max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 20 -> 14 dB (maximum 20 dB, suggested delta -6 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 20 dB => 14 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 14 -> 8 dB (maximum 20 dB, suggested delta -6 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 14 dB => 8 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 8 -> 2 dB (maximum 20 dB, suggested delta -6 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 8 dB => 2 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 2 -> 0 dB (maximum 20 dB, suggested delta -6 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 2 dB => 0 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, suggested delta -6 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(31), RXQUAL-FULL(0), RXLEV-SUB(31), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 10 -> 11 dB (maximum 20 dB, suggested delta 1 dB, RxLev current 31 (-79 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 10 dB => 11 dB:max 20 dB, RSSI[curr -79, avg -79, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 11 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 11 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(32), RXQUAL-FULL(0), RXLEV-SUB(32), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 11 -> 13 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 32 (-78 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 11 dB => 13 dB:max 20 dB, RSSI[curr -78, avg -78, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 13 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 13 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(33), RXQUAL-FULL(0), RXLEV-SUB(33), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 13 -> 16 dB (maximum 20 dB, suggested delta 3 dB, RxLev current 33 (-77 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 13 dB => 16 dB:max 20 dB, RSSI[curr -77, avg -77, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(29), RXQUAL-FULL(0), RXLEV-SUB(29), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 10 -> 9 dB (maximum 20 dB, suggested delta -1 dB, RxLev current 29 (-81 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 10 dB => 9 dB:max 20 dB, RSSI[curr -81, avg -81, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 9 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 9 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(27), RXQUAL-FULL(0), RXLEV-SUB(27), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 9 -> 6 dB (maximum 20 dB, suggested delta -3 dB, RxLev current 27 (-83 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 9 dB => 6 dB:max 20 dB, RSSI[curr -83, avg -83, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 6 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 6 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(25), RXQUAL-FULL(0), RXLEV-SUB(25), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 6 -> 1 dB (maximum 20 dB, suggested delta -5 dB, RxLev current 25 (-85 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 6 dB => 1 dB:max 20 dB, RSSI[curr -85, avg -85, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 1 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 1 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(00), RXQUAL-FULL(7), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is enabled => using SUB
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(3), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is enabled => using SUB
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(63), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is enabled => using SUB
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(1), RXLEV-SUB(30), RXQUAL-SUB(1), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 1, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(2), RXLEV-SUB(30), RXQUAL-SUB(2), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 2, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(3), RXLEV-SUB(30), RXQUAL-SUB(3), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 3, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(4), RXLEV-SUB(30), RXQUAL-SUB(4), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Reducing Downlink attenuation: 16 -> 12 dB due to RxQual 4 worse than L_RXQUAL_XX_P 3
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 16 dB => 12 dB:max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 4, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(34), RXQUAL-FULL(5), RXLEV-SUB(34), RXQUAL-SUB(5), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Reducing Downlink attenuation: 12 -> 8 dB due to RxQual 5 worse than L_RXQUAL_XX_P 3
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 12 dB => 8 dB:max 20 dB, RSSI[curr -76, avg -76, thresh -80..-80] dBm, RxQual[curr 5, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(38), RXQUAL-FULL(6), RXLEV-SUB(38), RXQUAL-SUB(6), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Reducing Downlink attenuation: 8 -> 4 dB due to RxQual 6 worse than L_RXQUAL_XX_P 3
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 8 dB => 4 dB:max 20 dB, RSSI[curr -72, avg -72, thresh -80..-80] dBm, RxQual[curr 6, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(42), RXQUAL-FULL(7), RXLEV-SUB(42), RXQUAL-SUB(7), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Reducing Downlink attenuation: 4 -> 0 dB due to RxQual 7 worse than L_RXQUAL_XX_P 3
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 4 dB => 0 dB:max 20 dB, RSSI[curr -68, avg -68, thresh -80..-80] dBm, RxQual[curr 7, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(46), RXQUAL-FULL(7), RXLEV-SUB(46), RXQUAL-SUB(7), DTx is disabled => using FULL
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -64, avg -64, thresh -80..-80] dBm, RxQual[curr 7, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(46), RXQUAL-FULL(0), RXLEV-SUB(46), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 0 -> 2 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 46 (-64 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 0 dB => 2 dB:max 20 dB, RSSI[curr -64, avg -64, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(44), RXQUAL-FULL(0), RXLEV-SUB(44), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 2 -> 4 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 44 (-66 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 2 dB => 4 dB:max 20 dB, RSSI[curr -66, avg -66, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(42), RXQUAL-FULL(0), RXLEV-SUB(42), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 4 -> 6 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 42 (-68 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 4 dB => 6 dB:max 20 dB, RSSI[curr -68, avg -68, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(7), RXLEV-SUB(30), RXQUAL-SUB(7), DTx is disabled => using FULL
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 7, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(7), RXLEV-SUB(30), RXQUAL-SUB(7), DTx is disabled => using FULL
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 7, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) The measurement results are not valid
 (bts=0,trx=0,ts=0,ss=0) The measurement results are not valid
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 0 -> 2 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 0 dB => 2 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 2 -> 4 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 2 dB => 4 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 4 -> 6 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 4 dB => 6 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 6 -> 8 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 6 dB => 8 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 8 -> 4 dB (maximum 20 dB, suggested delta -4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 8 dB => 4 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 4 -> 0 dB (maximum 20 dB, suggested delta -4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 4 dB => 0 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 0 -> 2 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 0 dB => 2 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 2 -> 4 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 2 dB => 4 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 4 -> 6 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 4 dB => 6 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 6 -> 8 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 6 dB => 8 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 8 -> 4 dB (maximum 20 dB, suggested delta -4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 8 dB => 4 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 4 -> 0 dB (maximum 20 dB, suggested delta -4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 4 dB => 0 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(31), RXQUAL-FULL(0), RXLEV-SUB(31), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 12 -> 13 dB (maximum 16 dB, suggested delta 1 dB, RxLev current 31 (-79 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 12 dB => 13 dB:max 16 dB, RSSI[curr -79, avg -79, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(28), RXQUAL-FULL(0), RXLEV-SUB(28), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 13 -> 11 dB (maximum 16 dB, suggested delta -2 dB, RxLev current 28 (-82 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 13 dB => 11 dB:max 16 dB, RSSI[curr -82, avg -82, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(33), RXQUAL-FULL(0), RXLEV-SUB(33), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 11 -> 13 dB (maximum 16 dB, suggested delta 2 dB, RxLev current 33 (-77 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 11 dB => 13 dB:max 16 dB, RSSI[curr -77, avg -77, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(28), RXQUAL-FULL(0), RXLEV-SUB(28), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 13 -> 11 dB (maximum 16 dB, suggested delta -2 dB, RxLev current 28 (-82 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 13 dB => 11 dB:max 16 dB, RSSI[curr -82, avg -82, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(31), RXQUAL-FULL(0), RXLEV-SUB(31), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 11 dB (maximum 16 dB, suggested delta 0 dB, RxLev current 31 (-79 dBm), thresholds 27 .. 33)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 11 dB: max 16 dB, RSSI[curr -79, avg -79, thresh -83..-77] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(28), RXQUAL-FULL(0), RXLEV-SUB(28), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 11 dB (maximum 16 dB, suggested delta 0 dB, RxLev current 28 (-82 dBm), thresholds 27 .. 33)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 11 dB: max 16 dB, RSSI[curr -82, avg -82, thresh -83..-77] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(33), RXQUAL-FULL(0), RXLEV-SUB(33), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 11 dB (maximum 16 dB, suggested delta 0 dB, RxLev current 33 (-77 dBm), thresholds 27 .. 33)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 11 dB: max 16 dB, RSSI[curr -77, avg -77, thresh -83..-77] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(28), RXQUAL-FULL(0), RXLEV-SUB(28), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 11 dB (maximum 16 dB, suggested delta 0 dB, RxLev current 28 (-82 dBm), thresholds 27 .. 33)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 11 dB: max 16 dB, RSSI[curr -82, avg -82, thresh -83..-77] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 30 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 30 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 30 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 30 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(26), RXQUAL-FULL(0), RXLEV-SUB(26), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 16 -> 14 dB (maximum 30 dB, suggested delta -2 dB, RxLev current 26 (-84 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 16 dB => 14 dB:max 30 dB, RSSI[curr -84, avg -82, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(26), RXQUAL-FULL(0), RXLEV-SUB(26), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 14 -> 11 dB (maximum 30 dB, suggested delta -3 dB, RxLev current 26 (-84 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 14 dB => 11 dB:max 30 dB, RSSI[curr -84, avg -83, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(35), RXQUAL-FULL(0), RXLEV-SUB(35), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 11 -> 12 dB (maximum 30 dB, suggested delta 1 dB, RxLev current 35 (-75 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 11 dB => 12 dB:max 30 dB, RSSI[curr -75, avg -79, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]
 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(35), RXQUAL-FULL(0), RXLEV-SUB(35), RXQUAL-SUB(0), DTx is disabled => using FULL
-(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 12 -> 14 dB (maximum 30 dB, suggested delta 2 dB, RxLev current 35 (-75 dBm), thresholds 30 .. 30)
+(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 12 dB => 14 dB:max 30 dB, RSSI[curr -75, avg -77, thresh -80..-80] dBm, RxQual[curr 0, thresh 3..0]

-- 
To view, visit https://gerrit.osmocom.org/c/osmo-bts/+/25334
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings

Gerrit-Project: osmo-bts
Gerrit-Branch: master
Gerrit-Change-Id: Ida76b55f0da722135eb61ed06ea2b3a1862df600
Gerrit-Change-Number: 25334
Gerrit-PatchSet: 2
Gerrit-Owner: pespin <pespin at sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: laforge <laforge at osmocom.org>
Gerrit-Reviewer: osmith <osmith at sysmocom.de>
Gerrit-Reviewer: pespin <pespin at sysmocom.de>
Gerrit-MessageType: merged
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20210906/dd02e20d/attachment.htm>


More information about the gerrit-log mailing list