Change in osmo-bsc[master]: manual: Include QoS chapter and add osmo-bsc specific example

[laforge]

laforge has submitted this change. ( https://gerrit.osmocom.org/c/osmo-bsc/+/24007 )

Change subject: manual: Include QoS chapter and add osmo-bsc specific example
......................................................................

manual: Include QoS chapter and add osmo-bsc specific example

Change-Id: I3b1d44fc545725172142b903190a3ff5094805dd
Requires: osmo-gsm-manuals.git Id344c29eda2a9b3e36376302b425e9db1f6c0f28
Requires: libosmo-abis.git I8991dd6eb406a5b9a70498974fc1ad339452f871
---
A doc/manuals/chapters/qos-example.adoc
M doc/manuals/osmobsc-usermanual.adoc
2 files changed, 48 insertions(+), 0 deletions(-)

Approvals:
  laforge: Looks good to me, approved
  pespin: Looks good to me, but someone else must approve
  Jenkins Builder: Verified



diff --git a/doc/manuals/chapters/qos-example.adoc b/doc/manuals/chapters/qos-example.adoc
new file mode 100644
index 0000000..2f88b93
--- /dev/null
+++ b/doc/manuals/chapters/qos-example.adoc
@@ -0,0 +1,46 @@
+==== Full example of QoS for osmo-bsc downlink QoS
+
+In the below example we will show the full set of configuration required
+for both DSCP and PCP differentiation of downlink Abis traffic by osmo-bsc.
+
+What we want to achieve in this example is the following configuration:
+
+.DSCP and PCP assignments for osmo-bsc downlink traffic in this example
+[options="header",width="30%",cols="2,1,1"]
+|===
+|Traffic      |DSCP|PCP
+|A-bis RSL    |  56|  7
+|A-bis RTP    |  46|  6
+|A-bis OML    |  34|  5
+|===
+
+. configure the osmocom program to set the DSCP value
+. configure an egrees QoS map to map from priority to PCP
+
+.Example Step 1: add related VTY configuration to `osmo-bsc.cfg`
+----
+...
+e1_input
+ ipa ip-dscp oml 34
+ ipa socket-priority oml 5
+ ipa ip-dscp rsl 56
+ ipa socket-priority rsl 7
+...
+----
+
+.Example Step 2: egress QoS map to map from socket priority to PCP values
+----
+$ sudo ip link set dev eth0.9<1> type vlan egress-qos-map 0:0 5:5 6:6 7:7 <2>
+----
+<1> make sure to specify your specific VLAN interface name here instead of `eth0.9`.
+<2> create a egress QoS map that maps the priority value 1:1 to the PCP. We also include the
+    mapping 6:6 from the osmo-mgw example (see <<userman-osmomgw>>) here.
+
+NOTE:: The settings of the `ip` command are volatile and only active until
+the next reboot (or the network device or VLAN is removed).  Please refer to
+the documentation of your specific Linux distribution in order to find out how
+to make such settings persistent by means of an `ifup` hook whenever the interface
+comes up.  For CentOS/RHEL 8 this can e.g. be achieved by means of an `/sbin/ifup-local
+script` (when using `network-scripts` and not NetworkManager).  For Debian or Ubuntu,
+this typically involves adding `up` lines to `/etc/network/interfaces` or a `/etc/network/if-up.d`
+script.
diff --git a/doc/manuals/osmobsc-usermanual.adoc b/doc/manuals/osmobsc-usermanual.adoc
index e66b2be..c7589cc 100644
--- a/doc/manuals/osmobsc-usermanual.adoc
+++ b/doc/manuals/osmobsc-usermanual.adoc
@@ -34,6 +34,8 @@
 
 include::{srcdir}/chapters/smlc.adoc[]
 
+include::./common/chapters/qos-dscp-pcp.adoc[]
+
 include::./common/chapters/counters-overview.adoc[]
 
 include::{srcdir}/chapters/counters.adoc[]

-- 
To view, visit https://gerrit.osmocom.org/c/osmo-bsc/+/24007
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings

Gerrit-Project: osmo-bsc
Gerrit-Branch: master
Gerrit-Change-Id: I3b1d44fc545725172142b903190a3ff5094805dd
Gerrit-Change-Number: 24007
Gerrit-PatchSet: 2
Gerrit-Owner: laforge <laforge at osmocom.org>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: laforge <laforge at osmocom.org>
Gerrit-Reviewer: pespin <pespin at sysmocom.de>
Gerrit-MessageType: merged
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20210501/f3fc2eaa/attachment.htm>