This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
laforge gerrit-no-reply at lists.osmocom.orglaforge has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-e1-hardware/+/23549 ) Change subject: manual: Fix USB ProductID swap between bootloader and application ...................................................................... manual: Fix USB ProductID swap between bootloader and application Change-Id: I7adf31cb731f34834bb859f667e5edf51964ad32 --- M doc/manuals/chapters/firmware.adoc 1 file changed, 2 insertions(+), 2 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-e1-hardware refs/changes/49/23549/1 diff --git a/doc/manuals/chapters/firmware.adoc b/doc/manuals/chapters/firmware.adoc index 254e235..b4fdebd 100644 --- a/doc/manuals/chapters/firmware.adoc +++ b/doc/manuals/chapters/firmware.adoc @@ -26,8 +26,8 @@ Simply disconnect the USB cable, then push that button and keep it pushed while re-attaching the USB cable. -The icE1usb boot loader enumerates as VID:PID `1d50:6145`, while the -normal application firmware enumerates as `1d50:6144`, +The icE1usb boot loader enumerates as VID:PID `1d50:6144`, while the +normal application firmware enumerates as `1d50:6145`, You can for example use `lsusb` to check the VID:PID: -- To view, visit https://gerrit.osmocom.org/c/osmo-e1-hardware/+/23549 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-e1-hardware Gerrit-Branch: master Gerrit-Change-Id: I7adf31cb731f34834bb859f667e5edf51964ad32 Gerrit-Change-Number: 23549 Gerrit-PatchSet: 1 Gerrit-Owner: laforge <laforge at osmocom.org> Gerrit-MessageType: newchange -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20210330/83496b0f/attachment.htm>