Change in osmo-ttcn3-hacks[master]: bsc-VAMOS: add cfg files to run BSC_Tests_VAMOS locally

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.

neels gerrit-no-reply at lists.osmocom.org
Fri Jun 4 21:46:32 UTC 2021


neels has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/24566 )


Change subject: bsc-VAMOS: add cfg files to run BSC_Tests_VAMOS locally
......................................................................

bsc-VAMOS: add cfg files to run BSC_Tests_VAMOS locally

A local tccn3 test run for VAMOS looks like:

  while sleep 1; do osmo-bts-omldummy -f vamos 127.0.0.1 1234; done

  osmo-stp

  osmo-bsc -c osmo-bsc-vamos.cfg

  make compile
  make -j 5
  ../start-testsuite.sh BSC_Tests BSC_Tests_VAMOS.cfg
  ../log_merge.sh BSC_Tests --rm

Change-Id: Iabda4c864b02e6ddbf03386c75d67a37f92992f4
---
A bsc/BSC_Tests_VAMOS.cfg
A bsc/osmo-bsc-vamos.cfg
2 files changed, 448 insertions(+), 0 deletions(-)



  git pull ssh://gerrit.osmocom.org:29418/osmo-ttcn3-hacks refs/changes/66/24566/1

diff --git a/bsc/BSC_Tests_VAMOS.cfg b/bsc/BSC_Tests_VAMOS.cfg
new file mode 100644
index 0000000..d8ea207
--- /dev/null
+++ b/bsc/BSC_Tests_VAMOS.cfg
@@ -0,0 +1,18 @@
+[ORDERED_INCLUDE]
+# Common configuration, shared between test suites
+"../Common.cfg"
+# testsuite specific configuration, not expected to change
+"./BSC_Tests.default"
+
+# Local configuration below
+
+[LOGGING]
+
+[TESTPORT_PARAMETERS]
+
+[MODULE_PARAMETERS]
+
+[MAIN_CONTROLLER]
+
+[EXECUTE]
+BSC_Tests_VAMOS.control
diff --git a/bsc/osmo-bsc-vamos.cfg b/bsc/osmo-bsc-vamos.cfg
new file mode 100644
index 0000000..5842a48
--- /dev/null
+++ b/bsc/osmo-bsc-vamos.cfg
@@ -0,0 +1,430 @@
+!
+! OsmoBSC (1.0.1.122-630df) configuration saved from vty
+!!
+password foo
+!
+log stderr
+ logging filter all 1
+ logging color 1
+ logging print category 1
+ logging timestamp 1
+ logging print extended-timestamp 1
+ logging level rll notice
+ logging level mm notice
+ logging level rr notice
+ logging level rsl notice
+ logging level nm info
+ logging level pag notice
+ logging level meas notice
+ logging level msc notice
+ logging level ho notice
+ logging level ref notice
+ logging level ctrl notice
+ logging level filter debug
+ logging level pcu debug
+ logging level lglobal notice
+ logging level llapd notice
+ logging level linp notice
+ logging level lmux notice
+ logging level lmi notice
+ logging level lmib notice
+ logging level lsms notice
+ logging level lctrl notice
+ logging level lgtp notice
+ logging level lstats notice
+ logging level lgsup notice
+ logging level loap notice
+ logging level lss7 notice
+ logging level lsccp notice
+ logging level lsua notice
+ logging level lm3ua notice
+ logging level lmgcp notice
+ logging level reset notice
+!
+stats interval 0
+stats reporter statsd
+ prefix TTCN3
+ level subscriber
+ remote-ip 127.0.0.1
+ remote-port 8125
+ flush-period 1
+ mtu 1024
+ enable
+!
+line vty
+ no login
+ bind 127.0.0.1
+!
+e1_input
+ e1_line 0 driver ipa
+ e1_line 0 port 0
+ no e1_line 0 keepalive
+cs7 instance 0
+ asp asp-clnt-msc-0 2905 1905 m3ua
+  remote-ip 127.0.0.1
+ sccp-address msc2
+  point-code 0.0.2
+ sccp-address msc3
+  point-code 0.0.3
+network
+ network country code 1
+ mobile network code 1
+ encryption a5 0 1 3
+ neci 1
+ paging any use tch 0
+ handover 1
+ handover window rxlev averaging 10
+ handover window rxqual averaging 1
+ handover window rxlev neighbor averaging 10
+ handover power budget interval 6
+ handover power budget hysteresis 3
+ handover maximum distance 9999
+ timer t3113 10
+ timer t3212 30
+ bts 0
+  type sysmobts
+  band DCS1800
+  cell_identity 0
+  location_area_code 1
+  dtx uplink force
+  dtx downlink
+  base_station_id_code 10
+  ms max power 15
+  cell reselection hysteresis 4
+  rxlev access min 0
+  radio-link-timeout 32
+  channel allocator ascending
+  rach tx integer 9
+  rach max transmission 7
+  channel-descrption attach 1
+  channel-descrption bs-pa-mfrms 5
+  channel-descrption bs-ag-blks-res 1
+  early-classmark-sending forbidden
+  ip.access unit_id 1234 0
+  oml ip.access stream_id 255 line 0
+  neighbor-list mode manual-si5
+  neighbor-list add arfcn 100
+  neighbor-list add arfcn 200
+  si5 neighbor-list add arfcn 10
+  si5 neighbor-list add arfcn 20
+  codec-support fr hr efr amr
+  gprs mode gprs
+  gprs routing area 0
+  gprs network-control-order nc0
+  gprs cell bvci 1234
+  gprs cell timer blocking-timer 3
+  gprs cell timer blocking-retries 3
+  gprs cell timer unblocking-retries 3
+  gprs cell timer reset-timer 3
+  gprs cell timer reset-retries 3
+  gprs cell timer suspend-timer 10
+  gprs cell timer suspend-retries 3
+  gprs cell timer resume-timer 10
+  gprs cell timer resume-retries 3
+  gprs cell timer capability-update-timer 10
+  gprs cell timer capability-update-retries 3
+  gprs nsei 1234
+  gprs ns timer tns-block 3
+  gprs ns timer tns-block-retries 3
+  gprs ns timer tns-reset 3
+  gprs ns timer tns-reset-retries 3
+  gprs ns timer tns-test 30
+  gprs ns timer tns-alive 3
+  gprs ns timer tns-alive-retries 10
+  gprs nsvc 0 nsvci 1234
+  gprs nsvc 0 local udp port 23000
+  gprs nsvc 0 remote udp port 23000
+  gprs nsvc 0 remote ip 192.168.100.239
+  gprs nsvc 1 nsvci 0
+  gprs nsvc 1 local udp port 0
+  gprs nsvc 1 remote udp port 0
+  gprs nsvc 1 remote ip 0.0.0.0
+  no force-combined-si
+  si2quater neighbor-list add earfcn 111 thresh-hi 20 thresh-lo 10 prio 3 qrxlv 22 meas 3
+  trx 0
+   rf_locked 0
+   arfcn 871
+   nominal power 23
+   max_power_red 20
+   rsl e1 tei 0
+   timeslot 0
+    phys_chan_config CCCH+SDCCH4+CBCH
+    hopping enabled 0
+   timeslot 1
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 2
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 3
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 4
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 5
+    phys_chan_config TCH/H
+    hopping enabled 0
+   timeslot 6
+    phys_chan_config TCH/H
+    hopping enabled 0
+   timeslot 7
+    phys_chan_config PDCH
+    hopping enabled 0
+ bts 1
+  type sysmobts
+  band DCS1800
+  cell_identity 1
+  location_area_code 1
+  dtx uplink force
+  dtx downlink
+  base_station_id_code 11
+  ms max power 15
+  cell reselection hysteresis 4
+  rxlev access min 0
+  radio-link-timeout 32
+  channel allocator ascending
+  rach tx integer 9
+  rach max transmission 7
+  channel-descrption attach 1
+  channel-descrption bs-pa-mfrms 5
+  channel-descrption bs-ag-blks-res 1
+  early-classmark-sending forbidden
+  ip.access unit_id 1235 0
+  oml ip.access stream_id 255 line 0
+  neighbor-list mode manual-si5
+  neighbor-list add arfcn 100
+  neighbor-list add arfcn 200
+  si5 neighbor-list add arfcn 10
+  si5 neighbor-list add arfcn 20
+  codec-support fr hr efr amr
+  gprs mode gprs
+  gprs routing area 0
+  gprs network-control-order nc0
+  gprs cell bvci 1235
+  gprs cell timer blocking-timer 3
+  gprs cell timer blocking-retries 3
+  gprs cell timer unblocking-retries 3
+  gprs cell timer reset-timer 3
+  gprs cell timer reset-retries 3
+  gprs cell timer suspend-timer 10
+  gprs cell timer suspend-retries 3
+  gprs cell timer resume-timer 10
+  gprs cell timer resume-retries 3
+  gprs cell timer capability-update-timer 10
+  gprs cell timer capability-update-retries 3
+  gprs nsei 1235
+  gprs ns timer tns-block 3
+  gprs ns timer tns-block-retries 3
+  gprs ns timer tns-reset 3
+  gprs ns timer tns-reset-retries 3
+  gprs ns timer tns-test 30
+  gprs ns timer tns-alive 3
+  gprs ns timer tns-alive-retries 10
+  gprs nsvc 0 nsvci 1235
+  gprs nsvc 0 local udp port 23000
+  gprs nsvc 0 remote udp port 23000
+  gprs nsvc 0 remote ip 192.168.100.239
+  gprs nsvc 1 nsvci 0
+  gprs nsvc 1 local udp port 0
+  gprs nsvc 1 remote udp port 0
+  gprs nsvc 1 remote ip 0.0.0.0
+  no force-combined-si
+  si2quater neighbor-list add earfcn 111 thresh-hi 20 thresh-lo 10 prio 3 qrxlv 22 meas 3
+  trx 0
+   rf_locked 0
+   arfcn 871
+   nominal power 23
+   max_power_red 20
+   rsl e1 tei 0
+   timeslot 0
+    phys_chan_config CCCH+SDCCH4+CBCH
+    hopping enabled 0
+   timeslot 1
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 2
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 3
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 4
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 5
+    phys_chan_config TCH/H
+    hopping enabled 0
+   timeslot 6
+    phys_chan_config PDCH
+    hopping enabled 0
+   timeslot 7
+    phys_chan_config PDCH
+    hopping enabled 0
+ bts 2
+  type sysmobts
+  band DCS1800
+  cell_identity 1
+  location_area_code 2
+  dtx uplink force
+  dtx downlink
+  base_station_id_code 12
+  ms max power 15
+  cell reselection hysteresis 4
+  rxlev access min 0
+  radio-link-timeout 32
+  channel allocator ascending
+  rach tx integer 9
+  rach max transmission 7
+  channel-descrption attach 1
+  channel-descrption bs-pa-mfrms 5
+  channel-descrption bs-ag-blks-res 1
+  early-classmark-sending forbidden
+  ip.access unit_id 1236 0
+  oml ip.access stream_id 255 line 0
+  neighbor-list mode manual-si5
+  neighbor-list add arfcn 100
+  neighbor-list add arfcn 200
+  si5 neighbor-list add arfcn 10
+  si5 neighbor-list add arfcn 20
+  codec-support fr hr efr amr
+  gprs mode gprs
+  gprs routing area 0
+  gprs network-control-order nc0
+  gprs cell bvci 1236
+  gprs cell timer blocking-timer 3
+  gprs cell timer blocking-retries 3
+  gprs cell timer unblocking-retries 3
+  gprs cell timer reset-timer 3
+  gprs cell timer reset-retries 3
+  gprs cell timer suspend-timer 10
+  gprs cell timer suspend-retries 3
+  gprs cell timer resume-timer 10
+  gprs cell timer resume-retries 3
+  gprs cell timer capability-update-timer 10
+  gprs cell timer capability-update-retries 3
+  gprs nsei 1236
+  gprs ns timer tns-block 3
+  gprs ns timer tns-block-retries 3
+  gprs ns timer tns-reset 3
+  gprs ns timer tns-reset-retries 3
+  gprs ns timer tns-test 30
+  gprs ns timer tns-alive 3
+  gprs ns timer tns-alive-retries 10
+  gprs nsvc 0 nsvci 1236
+  gprs nsvc 0 local udp port 23000
+  gprs nsvc 0 remote udp port 23000
+  gprs nsvc 0 remote ip 192.168.100.239
+  gprs nsvc 1 nsvci 0
+  gprs nsvc 1 local udp port 0
+  gprs nsvc 1 remote udp port 0
+  gprs nsvc 1 remote ip 0.0.0.0
+  no force-combined-si
+  si2quater neighbor-list add earfcn 111 thresh-hi 20 thresh-lo 10 prio 3 qrxlv 22 meas 3
+  trx 0
+   rf_locked 0
+   arfcn 871
+   nominal power 23
+   max_power_red 20
+   rsl e1 tei 0
+   timeslot 0
+    phys_chan_config CCCH+SDCCH4+CBCH
+    hopping enabled 0
+   timeslot 1
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 2
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 3
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 4
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 5
+    phys_chan_config TCH/H
+    hopping enabled 0
+   timeslot 6
+    phys_chan_config PDCH
+    hopping enabled 0
+   timeslot 7
+    phys_chan_config PDCH
+    hopping enabled 0
+ bts 3
+  type sysmobts
+  band DCS1800
+  cell_identity 3
+  location_area_code 3
+  # re-use bts 2's ARFCN 871 and BSIC 12 (to test handover config)
+  base_station_id_code 12
+  trx 0
+   rf_locked 0
+   arfcn 871
+   nominal power 23
+   max_power_red 20
+   rsl e1 tei 0
+   timeslot 0
+    phys_chan_config CCCH+SDCCH4
+   timeslot 1
+    phys_chan_config TCH/F
+   timeslot 2
+    phys_chan_config TCH/F
+   timeslot 3
+    phys_chan_config TCH/F
+   timeslot 4
+    phys_chan_config TCH/F
+   timeslot 5
+    phys_chan_config TCH/H
+   timeslot 6
+    phys_chan_config PDCH
+   timeslot 7
+    phys_chan_config PDCH
+msc 0
+ allow-emergency allow
+ amr-config 12_2k forbidden
+ amr-config 10_2k forbidden
+ amr-config 7_95k forbidden
+ amr-config 7_40k forbidden
+ amr-config 6_70k forbidden
+ amr-config 5_90k allowed
+ amr-config 5_15k forbidden
+ amr-config 4_75k forbidden
+ codec-list fr1 fr2 fr3 hr1 hr3
+ mgw remote-ip 127.0.0.1
+ lcls-mode mgw-loop
+msc 1
+ msc-addr msc2
+ mgw remote-ip 127.0.0.1
+msc 2
+ msc-addr msc3
+ mgw remote-ip 127.0.0.1
+
+network
+ nri bitlen 10
+ # a NULL NRI that is outside the NRI ranges used by the MSCs:
+ nri null add 0
+ # a NULL NRI that is also used by an MSC:
+ nri null add 1
+msc 0
+ nri add 1 255
+msc 1
+ nri add 256 511
+msc 2
+ nri add 512 767
+ # range 768-1024 is not assigned to any MSC on purpose
+
+bsc
+ mid-call-timeout 0
+ctrl
+ bind 127.0.0.1
+cbc
+ mode disabled
+ client
+  remote-ip 127.0.0.1
+  remote-port 48049
+ server
+  local-ip 127.0.0.1
+  local-port 48050
+smlc
+ enable

-- 
To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/24566
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings

Gerrit-Project: osmo-ttcn3-hacks
Gerrit-Branch: master
Gerrit-Change-Id: Iabda4c864b02e6ddbf03386c75d67a37f92992f4
Gerrit-Change-Number: 24566
Gerrit-PatchSet: 1
Gerrit-Owner: neels <nhofmeyr at sysmocom.de>
Gerrit-MessageType: newchange
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20210604/501ad05e/attachment.htm>


More information about the gerrit-log mailing list