This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
laforge gerrit-no-reply at lists.osmocom.orglaforge has submitted this change. ( https://gerrit.osmocom.org/c/osmo-bts/+/22415 ) Change subject: power_control: clarify the meaning of 'delta' in logging messages ...................................................................... power_control: clarify the meaning of 'delta' in logging messages One part of the algorithm simply provides a _suggested_ 'delta' that needs to be applied to the current power level, while the other part ensures that this suggested value does not exceed the limits. Thus it's possible that some logging messages would state that the power reduction value remains unchanged, while the 'detla' != 0. Change-Id: I7496a158b9ac6074a965056d708d8078a98cb1aa Related: SYS#4918 --- M src/common/power_control.c M tests/power/bs_power_loop_test.err 2 files changed, 78 insertions(+), 78 deletions(-) Approvals: Jenkins Builder: Verified laforge: Looks good to me, approved diff --git a/src/common/power_control.c b/src/common/power_control.c index 2948861..be74a41 100644 --- a/src/common/power_control.c +++ b/src/common/power_control.c @@ -318,7 +318,7 @@ if (state->current != new) { LOGPLCHAN(lchan, DLOOP, LOGL_INFO, "Changing Downlink attenuation: " - "%u -> %u dB (maximum %u dB, delta %d dB, " + "%u -> %u dB (maximum %u dB, suggested delta %d dB, " "RxLev current %u (%d dBm), thresholds %u .. %u)\n", state->current, new, state->max, -delta, rxlev, rxlev2dbm(rxlev), @@ -328,7 +328,7 @@ return 1; } else { LOGPLCHAN(lchan, DLOOP, LOGL_INFO, "Keeping Downlink attenuation " - "at %u dB (maximum %u dB, delta %d dB, " + "at %u dB (maximum %u dB, suggested delta %d dB, " "RxLev current %u (%d dBm), thresholds %u .. %u)\n", state->current, state->max, -delta, rxlev, rxlev2dbm(rxlev), diff --git a/tests/power/bs_power_loop_test.err b/tests/power/bs_power_loop_test.err index c3fb816..7fcfb1e 100644 --- a/tests/power/bs_power_loop_test.err +++ b/tests/power/bs_power_loop_test.err @@ -1,115 +1,115 @@ (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 0 -> 2 dB (maximum 20 dB, delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 0 -> 2 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 2 -> 4 dB (maximum 20 dB, delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 2 -> 4 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 4 -> 6 dB (maximum 20 dB, delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 4 -> 6 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 6 -> 8 dB (maximum 20 dB, delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 6 -> 8 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 8 -> 10 dB (maximum 20 dB, delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 8 -> 10 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 10 -> 12 dB (maximum 20 dB, delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 10 -> 12 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 12 -> 14 dB (maximum 20 dB, delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 12 -> 14 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 14 -> 16 dB (maximum 20 dB, delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 14 -> 16 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 16 -> 18 dB (maximum 20 dB, delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 16 -> 18 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 18 -> 20 dB (maximum 20 dB, delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 18 -> 20 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 20 dB (maximum 20 dB, delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 20 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 20 dB (maximum 20 dB, delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 20 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 20 -> 16 dB (maximum 20 dB, delta -4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 20 -> 16 dB (maximum 20 dB, suggested delta -4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 16 -> 12 dB (maximum 20 dB, delta -4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 16 -> 12 dB (maximum 20 dB, suggested delta -4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 12 -> 8 dB (maximum 20 dB, delta -4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 12 -> 8 dB (maximum 20 dB, suggested delta -4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 8 -> 4 dB (maximum 20 dB, delta -4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 8 -> 4 dB (maximum 20 dB, suggested delta -4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 4 -> 0 dB (maximum 20 dB, delta -4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 4 -> 0 dB (maximum 20 dB, suggested delta -4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, delta -4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, suggested delta -4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, delta -4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, suggested delta -4 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 0 -> 4 dB (maximum 20 dB, delta 4 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 0 -> 4 dB (maximum 20 dB, suggested delta 4 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 4 -> 8 dB (maximum 20 dB, delta 4 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 4 -> 8 dB (maximum 20 dB, suggested delta 4 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 8 -> 12 dB (maximum 20 dB, delta 4 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 8 -> 12 dB (maximum 20 dB, suggested delta 4 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 12 -> 16 dB (maximum 20 dB, delta 4 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 12 -> 16 dB (maximum 20 dB, suggested delta 4 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 16 -> 20 dB (maximum 20 dB, delta 4 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 16 -> 20 dB (maximum 20 dB, suggested delta 4 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 20 dB (maximum 20 dB, delta 4 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 20 dB (maximum 20 dB, suggested delta 4 dB, RxLev current 60 (-50 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 20 -> 14 dB (maximum 20 dB, delta -6 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 20 -> 14 dB (maximum 20 dB, suggested delta -6 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 14 -> 8 dB (maximum 20 dB, delta -6 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 14 -> 8 dB (maximum 20 dB, suggested delta -6 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 8 -> 2 dB (maximum 20 dB, delta -6 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 8 -> 2 dB (maximum 20 dB, suggested delta -6 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 2 -> 0 dB (maximum 20 dB, delta -6 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 2 -> 0 dB (maximum 20 dB, suggested delta -6 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, delta -6 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, suggested delta -6 dB, RxLev current 10 (-100 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(31), RXQUAL-FULL(0), RXLEV-SUB(31), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 10 -> 11 dB (maximum 20 dB, delta 1 dB, RxLev current 31 (-79 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 10 -> 11 dB (maximum 20 dB, suggested delta 1 dB, RxLev current 31 (-79 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 11 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 11 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(32), RXQUAL-FULL(0), RXLEV-SUB(32), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 11 -> 13 dB (maximum 20 dB, delta 2 dB, RxLev current 32 (-78 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 11 -> 13 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 32 (-78 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 13 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 13 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(33), RXQUAL-FULL(0), RXLEV-SUB(33), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 13 -> 16 dB (maximum 20 dB, delta 3 dB, RxLev current 33 (-77 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 13 -> 16 dB (maximum 20 dB, suggested delta 3 dB, RxLev current 33 (-77 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(29), RXQUAL-FULL(0), RXLEV-SUB(29), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 10 -> 9 dB (maximum 20 dB, delta -1 dB, RxLev current 29 (-81 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 10 -> 9 dB (maximum 20 dB, suggested delta -1 dB, RxLev current 29 (-81 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 9 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 9 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(27), RXQUAL-FULL(0), RXLEV-SUB(27), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 9 -> 6 dB (maximum 20 dB, delta -3 dB, RxLev current 27 (-83 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 9 -> 6 dB (maximum 20 dB, suggested delta -3 dB, RxLev current 27 (-83 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 6 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 6 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(25), RXQUAL-FULL(0), RXLEV-SUB(25), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 6 -> 1 dB (maximum 20 dB, delta -5 dB, RxLev current 25 (-85 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 6 -> 1 dB (maximum 20 dB, suggested delta -5 dB, RxLev current 25 (-85 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 1 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 1 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(00), RXQUAL-FULL(7), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is enabled => using SUB -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(3), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is enabled => using SUB -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(63), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is enabled => using SUB -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 0 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(1), RXLEV-SUB(30), RXQUAL-SUB(1), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(2), RXLEV-SUB(30), RXQUAL-SUB(2), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(3), RXLEV-SUB(30), RXQUAL-SUB(3), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(4), RXLEV-SUB(30), RXQUAL-SUB(4), DTx is disabled => using FULL (bts=0,trx=0,ts=0,ss=0) Reducing Downlink attenuation: 16 -> 12 dB due to RxQual 4 worse than L_RXQUAL_XX_P 3 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(34), RXQUAL-FULL(5), RXLEV-SUB(34), RXQUAL-SUB(5), DTx is disabled => using FULL @@ -120,46 +120,46 @@ (bts=0,trx=0,ts=0,ss=0) Reducing Downlink attenuation: 4 -> 0 dB due to RxQual 7 worse than L_RXQUAL_XX_P 3 (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(46), RXQUAL-FULL(7), RXLEV-SUB(46), RXQUAL-SUB(7), DTx is disabled => using FULL (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(46), RXQUAL-FULL(0), RXLEV-SUB(46), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 0 -> 2 dB (maximum 20 dB, delta 2 dB, RxLev current 46 (-64 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 0 -> 2 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 46 (-64 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(44), RXQUAL-FULL(0), RXLEV-SUB(44), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 2 -> 4 dB (maximum 20 dB, delta 2 dB, RxLev current 44 (-66 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 2 -> 4 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 44 (-66 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(42), RXQUAL-FULL(0), RXLEV-SUB(42), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 4 -> 6 dB (maximum 20 dB, delta 2 dB, RxLev current 42 (-68 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 4 -> 6 dB (maximum 20 dB, suggested delta 2 dB, RxLev current 42 (-68 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(7), RXLEV-SUB(30), RXQUAL-SUB(7), DTx is disabled => using FULL (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(7), RXLEV-SUB(30), RXQUAL-SUB(7), DTx is disabled => using FULL (bts=0,trx=0,ts=0,ss=0) The measurement results are not valid (bts=0,trx=0,ts=0,ss=0) The measurement results are not valid (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 20 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(31), RXQUAL-FULL(0), RXLEV-SUB(31), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 12 -> 13 dB (maximum 16 dB, delta 1 dB, RxLev current 31 (-79 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 12 -> 13 dB (maximum 16 dB, suggested delta 1 dB, RxLev current 31 (-79 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(28), RXQUAL-FULL(0), RXLEV-SUB(28), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 13 -> 11 dB (maximum 16 dB, delta -2 dB, RxLev current 28 (-82 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 13 -> 11 dB (maximum 16 dB, suggested delta -2 dB, RxLev current 28 (-82 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(33), RXQUAL-FULL(0), RXLEV-SUB(33), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 11 -> 13 dB (maximum 16 dB, delta 2 dB, RxLev current 33 (-77 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 11 -> 13 dB (maximum 16 dB, suggested delta 2 dB, RxLev current 33 (-77 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(28), RXQUAL-FULL(0), RXLEV-SUB(28), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 13 -> 11 dB (maximum 16 dB, delta -2 dB, RxLev current 28 (-82 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 13 -> 11 dB (maximum 16 dB, suggested delta -2 dB, RxLev current 28 (-82 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(31), RXQUAL-FULL(0), RXLEV-SUB(31), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 11 dB (maximum 16 dB, delta 0 dB, RxLev current 31 (-79 dBm), thresholds 27 .. 33) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 11 dB (maximum 16 dB, suggested delta 0 dB, RxLev current 31 (-79 dBm), thresholds 27 .. 33) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(28), RXQUAL-FULL(0), RXLEV-SUB(28), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 11 dB (maximum 16 dB, delta 0 dB, RxLev current 28 (-82 dBm), thresholds 27 .. 33) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 11 dB (maximum 16 dB, suggested delta 0 dB, RxLev current 28 (-82 dBm), thresholds 27 .. 33) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(33), RXQUAL-FULL(0), RXLEV-SUB(33), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 11 dB (maximum 16 dB, delta 0 dB, RxLev current 33 (-77 dBm), thresholds 27 .. 33) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 11 dB (maximum 16 dB, suggested delta 0 dB, RxLev current 33 (-77 dBm), thresholds 27 .. 33) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(28), RXQUAL-FULL(0), RXLEV-SUB(28), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 11 dB (maximum 16 dB, delta 0 dB, RxLev current 28 (-82 dBm), thresholds 27 .. 33) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 11 dB (maximum 16 dB, suggested delta 0 dB, RxLev current 28 (-82 dBm), thresholds 27 .. 33) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 30 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 30 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 30 dB, delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Keeping Downlink attenuation at 16 dB (maximum 30 dB, suggested delta 0 dB, RxLev current 30 (-80 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(26), RXQUAL-FULL(0), RXLEV-SUB(26), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 16 -> 14 dB (maximum 30 dB, delta -2 dB, RxLev current 26 (-84 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 16 -> 14 dB (maximum 30 dB, suggested delta -2 dB, RxLev current 26 (-84 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(26), RXQUAL-FULL(0), RXLEV-SUB(26), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 14 -> 11 dB (maximum 30 dB, delta -3 dB, RxLev current 26 (-84 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 14 -> 11 dB (maximum 30 dB, suggested delta -3 dB, RxLev current 26 (-84 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(35), RXQUAL-FULL(0), RXLEV-SUB(35), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 11 -> 12 dB (maximum 30 dB, delta 1 dB, RxLev current 35 (-75 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 11 -> 12 dB (maximum 30 dB, suggested delta 1 dB, RxLev current 35 (-75 dBm), thresholds 30 .. 30) (bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(35), RXQUAL-FULL(0), RXLEV-SUB(35), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 12 -> 14 dB (maximum 30 dB, delta 2 dB, RxLev current 35 (-75 dBm), thresholds 30 .. 30) +(bts=0,trx=0,ts=0,ss=0) Changing Downlink attenuation: 12 -> 14 dB (maximum 30 dB, suggested delta 2 dB, RxLev current 35 (-75 dBm), thresholds 30 .. 30) -- To view, visit https://gerrit.osmocom.org/c/osmo-bts/+/22415 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-bts Gerrit-Branch: master Gerrit-Change-Id: I7496a158b9ac6074a965056d708d8078a98cb1aa Gerrit-Change-Number: 22415 Gerrit-PatchSet: 1 Gerrit-Owner: fixeria <vyanitskiy at sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge at osmocom.org> Gerrit-MessageType: merged -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20210124/ef77b272/attachment.htm>