This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Vadim Yanitskiy gerrit-no-reply at lists.osmocom.orgVadim Yanitskiy has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-bsc/+/18605 )
Change subject: doc/manuals: regenerate the VTY reference file
......................................................................
doc/manuals: regenerate the VTY reference file
Change-Id: I4f7bf671b7948d8c3771d33d40ab5e8cf209e2b2
---
M doc/manuals/vty/bsc_vty_reference.xml
1 file changed, 0 insertions(+), 130 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-bsc refs/changes/05/18605/1
diff --git a/doc/manuals/vty/bsc_vty_reference.xml b/doc/manuals/vty/bsc_vty_reference.xml
index 4e2ce46..8f3edf9 100644
--- a/doc/manuals/vty/bsc_vty_reference.xml
+++ b/doc/manuals/vty/bsc_vty_reference.xml
@@ -622,13 +622,6 @@
<param name='all' doc='All Subscribers' />
</params>
</command>
- <command id='show access-list NAME'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='access-list' doc='IMSI access list' />
- <param name='NAME' doc='Name of the access list' />
- </params>
- </command>
<command id='show cs7 instance <0-15> users'>
<params>
<param name='show' doc='Show running system information' />
@@ -1547,13 +1540,6 @@
<param name='<0-255>' doc='BTS to report' />
</params>
</command>
- <command id='show access-list NAME'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='access-list' doc='IMSI access list' />
- <param name='NAME' doc='Name of the access list' />
- </params>
- </command>
<command id='show cs7 instance <0-15> users'>
<params>
<param name='show' doc='Show running system information' />
@@ -4778,49 +4764,6 @@
<param name='.LIST' doc='List of audio codecs, e.g. fr3 fr1 hr3' />
</params>
</command>
- <command id='bsc-welcome-text .TEXT'>
- <params>
- <param name='bsc-welcome-text' doc='Set the USSD notification to be sent' />
- <param name='.TEXT' doc='Text to be sent' />
- </params>
- </command>
- <command id='no bsc-welcome-text'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='bsc-welcome-text' doc='Clear the USSD notification to be sent' />
- </params>
- </command>
- <command id='bsc-msc-lost-text .TEXT'>
- <params>
- <param name='bsc-msc-lost-text' doc='Set the USSD notification to be sent on MSC connection loss' />
- <param name='.TEXT' doc='Text to be sent' />
- </params>
- </command>
- <command id='no bsc-msc-lost-text'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='bsc-msc-lost-text' doc='Clear the USSD notification to be sent on MSC connection loss' />
- </params>
- </command>
- <command id='bsc-grace-text .TEXT'>
- <params>
- <param name='bsc-grace-text' doc='Set the USSD notification to be sent when the MSC has entered the grace period' />
- <param name='.TEXT' doc='Text to be sent' />
- </params>
- </command>
- <command id='no bsc-grace-text'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='bsc-grace-text' doc='Clear the USSD notification to be sent when the MSC has entered the grace period' />
- </params>
- </command>
- <command id='type (normal|local)'>
- <params>
- <param name='type' doc='Select the MSC type' />
- <param name='normal' doc='Plain GSM MSC' />
- <param name='local' doc='Special MSC for local call routing' />
- </params>
- </command>
<command id='allow-emergency (allow|deny)'>
<params>
<param name='allow-emergency' doc='Allow CM ServiceRequests with type emergency' />
@@ -4828,12 +4771,6 @@
<param name='deny' doc='Deny' />
</params>
</command>
- <command id='local-prefix REGEXP'>
- <params>
- <param name='local-prefix' doc='Prefix for local numbers' />
- <param name='REGEXP' doc='REGEXP used' />
- </params>
- </command>
<command id='amr-config 12_2k (allowed|forbidden)'>
<params>
<param name='amr-config' doc='AMR Multirate Configuration' />
@@ -4920,18 +4857,6 @@
<param name='forbidden' doc='Do not Allow LCLS for calls that use a different codec/rate on both legs' />
</params>
</command>
- <command id='access-list-name NAME'>
- <params>
- <param name='access-list-name' doc='Set the name of the access list to use.' />
- <param name='NAME' doc='The name of the to be used access list.' />
- </params>
- </command>
- <command id='no access-list-name'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='access-list-name' doc='Remove the access list from the NAT.' />
- </params>
- </command>
<command id='bsc-addr NAME'>
<params>
<param name='bsc-addr' doc='Calling Address (local address of this BSC)' />
@@ -5103,12 +5028,6 @@
</node>
<node id='config-bsc'>
<name>config-bsc</name>
- <command id='mid-call-text .TEXT'>
- <params>
- <param name='mid-call-text' doc='Set the USSD notification sent to running calls when switching from Grace to Off.' />
- <param name='.TEXT' doc='Text to be sent' />
- </params>
- </command>
<command id='mid-call-timeout NR'>
<params>
<param name='mid-call-timeout' doc='Switch from Grace to Off in NR seconds.' />
@@ -5133,55 +5052,6 @@
<param name='bsc-auto-rf-off' doc='Disable RF on MSC Connection' />
</params>
</command>
- <command id='missing-msc-text .TEXT'>
- <params>
- <param name='missing-msc-text' doc='Set the USSD notification to be send when a MSC has not been found.' />
- <param name='.TEXT' doc='Text to be sent' />
- </params>
- </command>
- <command id='no missing-msc-text'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='missing-msc-text' doc='Clear the USSD notification to be send when a MSC has not been found.' />
- </params>
- </command>
- <command id='access-list-name NAME'>
- <params>
- <param name='access-list-name' doc='Set the name of the access list to use.' />
- <param name='NAME' doc='The name of the to be used access list.' />
- </params>
- </command>
- <command id='no access-list-name'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='access-list-name' doc='Remove the access list from the BSC' />
- </params>
- </command>
- <command id='access-list NAME imsi-allow [REGEXP]'>
- <params>
- <param name='access-list' doc='Access list commands' />
- <param name='NAME' doc='Name of the access list' />
- <param name='imsi-allow' doc='Add allowed IMSI to the list' />
- <param name='[REGEXP]' doc='Regexp for IMSIs' />
- </params>
- </command>
- <command id='access-list NAME imsi-deny [REGEXP] (<0-256>) (<0-256>)'>
- <params>
- <param name='access-list' doc='Access list commands' />
- <param name='NAME' doc='Name of the access list' />
- <param name='imsi-deny' doc='Add denied IMSI to the list' />
- <param name='[REGEXP]' doc='Regexp for IMSIs' />
- <param name='<0-256>' doc='CM Service Reject reason' />
- <param name='<0-256>' doc='LU Reject reason' />
- </params>
- </command>
- <command id='no access-list NAME'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='access-list' doc='Remove an access-list by name' />
- <param name='NAME' doc='The access-list to remove' />
- </params>
- </command>
</node>
<node id='config-cbc'>
<name>config-cbc</name>
--
To view, visit https://gerrit.osmocom.org/c/osmo-bsc/+/18605
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-bsc
Gerrit-Branch: master
Gerrit-Change-Id: I4f7bf671b7948d8c3771d33d40ab5e8cf209e2b2
Gerrit-Change-Number: 18605
Gerrit-PatchSet: 1
Gerrit-Owner: Vadim Yanitskiy <vyanitskiy at sysmocom.de>
Gerrit-MessageType: newchange
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20200530/c138e984/attachment.htm>