Change in osmo-bts[master]: contrib: import RPM spec

[laforge]

laforge has submitted this change. ( https://gerrit.osmocom.org/c/osmo-bts/+/18287 )

Change subject: contrib: import RPM spec
......................................................................

contrib: import RPM spec

Copy the RPM spec file from:
https://build.opensuse.org/project/show/home:mnhauke:osmocom:nightly

Related: OS#4550
Change-Id: I932d5965a713a3018d8819d1b244ff8ca3144fb1
---
A contrib/osmo-bts.spec
1 file changed, 116 insertions(+), 0 deletions(-)

Approvals:
  Jenkins Builder: Verified
  laforge: Looks good to me, approved



diff --git a/contrib/osmo-bts.spec b/contrib/osmo-bts.spec
new file mode 100644
index 0000000..2a423b2
--- /dev/null
+++ b/contrib/osmo-bts.spec
@@ -0,0 +1,116 @@
+#
+# spec file for package osmo-bts
+#
+# Copyright (c) 2017, Martin Hauke <mardnh at gmx.de>
+#
+# All modifications and additions to the file contributed by third parties
+# remain the property of their copyright owners, unless otherwise agreed
+# upon. The license for this file, and modifications and additions to the
+# file, is the same license as for the pristine package itself (unless the
+# license for the pristine package is not an Open Source License, in which
+# case the license is the MIT License). An "Open Source License" is a
+# license that conforms to the Open Source Definition (Version 1.9)
+# published by the Open Source Initiative.
+
+# Please submit bugfixes or comments via http://bugs.opensuse.org/
+#
+
+Name:           osmo-bts
+Version:        1.2.0.49
+Release:        0
+Summary:        Osmocom BTS-Side code (Abis, scheduling)
+License:        AGPL-3.0-or-later AND GPL-2.0-only
+Group:          Productivity/Telephony/Servers
+URL:            https://osmocom.org/projects/osmobts/wiki/Wiki
+Source:         %{name}-%{version}.tar.xz
+BuildRequires:  autoconf
+BuildRequires:  automake
+BuildRequires:  libtool
+BuildRequires:  pkgconfig >= 0.20
+BuildRequires:  systemd-rpm-macros
+BuildRequires:  pkgconfig(libosmoabis) >= 0.6.0
+BuildRequires:  pkgconfig(libosmocodec) >= 1.2.0
+BuildRequires:  pkgconfig(libosmocoding) >= 1.2.0
+BuildRequires:  pkgconfig(libosmocore) >= 1.2.0
+BuildRequires:  pkgconfig(libosmoctrl) >= 1.2.0
+BuildRequires:  pkgconfig(libosmogsm) >= 1.2.0
+BuildRequires:  pkgconfig(libosmotrau) >= 0.6.0
+BuildRequires:  pkgconfig(libosmovty) >= 1.2.0
+### FIXME: DependencyHACK to include  osmocom/gprs/protocol/gsm_04_60.h
+BuildRequires:  pkgconfig(libosmogb)
+
+%description
+Osmocom BTS-Side code (A-bis, scheduling).
+
+%package -n osmo-bts-virtual
+Summary:        Virtual Osmocom GSM BTS (no RF hardware; GSMTAP/UDP)
+License:        GPL-2.0-or-later
+Group:          Productivity/Telephony/Utilities
+
+%description -n osmo-bts-virtual
+This version of OsmoBTS doesn't use actual GSM PHY/Hardware/RF, but
+utilizes GSMTAP-over-UDP frames for the Um interface.  This is useful
+in fully virtualized setups e.g. in combination with OsmocomBB virt_phy.
+
+%package -n osmo-bts-omldummy
+Summary:        Osmocom CI: Bring up only OML without RSL
+License:        GPL-2.0-or-later
+Group:          Productivity/Telephony/Utilities
+
+%description -n osmo-bts-omldummy
+This is used only in integration testing, where in the TTCN-3 testsuite
+we currently have no A-bis OML implementation, but only a RSL one.
+
+%prep
+%setup -q
+
+%build
+echo "%{version}" >.tarball-version
+autoreconf -fi
+%configure \
+    --docdir="%{_docdir}/%{name}" \
+    --with-systemdsystemunitdir=%{_unitdir} \
+    --enable-trx
+make V=1 %{?_smp_mflags}
+
+%install
+%make_install
+
+%pre    %service_add_pre    osmo-bts-trx.service
+%post   %service_add_post   osmo-bts-trx.service
+%preun  %service_del_preun  osmo-bts-trx.service
+%postun %service_del_postun osmo-bts-trx.service
+%pre    virtual %service_add_pre    osmo-bts-virtual.service
+%post   virtual %service_add_post   osmo-bts-virtual.service
+%preun  virtual %service_del_preun  osmo-bts-virtual.service
+%postun virtual %service_del_postun osmo-bts-virtual.service
+
+%check
+make %{?_smp_mflags} check || (find . -name testsuite.log -exec cat {} +)
+
+%files
+%license COPYING
+%doc README.md
+%dir %{_docdir}/%{name}
+%dir %{_docdir}/%{name}/examples
+%dir %{_docdir}/%{name}/examples/osmo-bts-trx
+%{_docdir}/%{name}/examples/osmo-bts-trx/osmo-bts-trx-calypso.cfg
+%{_docdir}/%{name}/examples/osmo-bts-trx/osmo-bts-trx.cfg
+%dir %{_docdir}/%{name}/examples/osmo-bts-virtual
+%{_docdir}/%{name}/examples/osmo-bts-virtual/openbsc-virtual.cfg
+%{_docdir}/%{name}/examples/osmo-bts-virtual/osmo-bts-virtual.cfg
+%{_bindir}/osmo-bts-trx
+%dir %{_sysconfdir}/osmocom
+%config %{_sysconfdir}/osmocom/osmo-bts-trx.cfg
+%{_unitdir}/osmo-bts-trx.service
+
+%files -n osmo-bts-virtual
+%{_bindir}/osmo-bts-virtual
+%dir %{_sysconfdir}/osmocom
+%config %{_sysconfdir}/osmocom/osmo-bts-virtual.cfg
+%{_unitdir}/osmo-bts-virtual.service
+
+%files -n osmo-bts-omldummy
+%{_bindir}/osmo-bts-omldummy
+
+%changelog

-- 
To view, visit https://gerrit.osmocom.org/c/osmo-bts/+/18287
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings

Gerrit-Project: osmo-bts
Gerrit-Branch: master
Gerrit-Change-Id: I932d5965a713a3018d8819d1b244ff8ca3144fb1
Gerrit-Change-Number: 18287
Gerrit-PatchSet: 2
Gerrit-Owner: osmith <osmith at sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: laforge <laforge at osmocom.org>
Gerrit-MessageType: merged
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20200519/5377f842/attachment.htm>