This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
osmith gerrit-no-reply at lists.osmocom.orgosmith has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-bsc/+/17636 )
Change subject: VTY: let all descriptions end in \n
......................................................................
VTY: let all descriptions end in \n
Change-Id: I00a183078679db50567286a78c9e4f9afa3466c6
---
M src/osmo-bsc/abis_nm_vty.c
M src/osmo-bsc/bsc_vty.c
M src/osmo-bsc/osmo_bsc_vty.c
3 files changed, 18 insertions(+), 18 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-bsc refs/changes/36/17636/1
diff --git a/src/osmo-bsc/abis_nm_vty.c b/src/osmo-bsc/abis_nm_vty.c
index b1c6d56..fe467fa 100644
--- a/src/osmo-bsc/abis_nm_vty.c
+++ b/src/osmo-bsc/abis_nm_vty.c
@@ -165,7 +165,7 @@
}
DEFUN(oml_opstart, oml_opstart_cmd,
- "opstart", "Send an OPSTART message to the object")
+ "opstart", "Send an OPSTART message to the object\n")
{
struct oml_node_state *oms = vty->index;
diff --git a/src/osmo-bsc/bsc_vty.c b/src/osmo-bsc/bsc_vty.c
index e9085b3..a41db9f 100644
--- a/src/osmo-bsc/bsc_vty.c
+++ b/src/osmo-bsc/bsc_vty.c
@@ -536,7 +536,7 @@
DEFUN(show_bts, show_bts_cmd, "show bts [<0-255>]",
SHOW_STR "Display information about a BTS\n"
- "BTS number")
+ "BTS number\n")
{
struct gsm_network *net = gsmnet_from_vty(vty);
int bts_nr;
@@ -2560,7 +2560,7 @@
"ccch load-indication-threshold <0-100>",
CCCH_STR
"Percentage of CCCH load at which BTS sends RSL CCCH LOAD IND\n"
- "CCCH Load Threshold in percent (Default: 10)")
+ "CCCH Load Threshold in percent (Default: 10)\n")
{
struct gsm_bts *bts = vty->index;
bts->ccch_load_ind_thresh = atoi(argv[0]);
@@ -2575,7 +2575,7 @@
RACH_STR NM_STR
"Set the NM Busy Threshold\n"
"Set the NM Busy Threshold\n"
- "NM Busy Threshold in dB")
+ "NM Busy Threshold in dB\n")
{
struct gsm_bts *bts = vty->index;
bts->rach_b_thresh = atoi(argv[0]);
@@ -2679,7 +2679,7 @@
"MS Options\n"
"Maximum transmit power of the MS\n"
"Maximum transmit power of the MS\n"
- "Maximum transmit power of the MS in dBm")
+ "Maximum transmit power of the MS in dBm\n")
{
struct gsm_bts *bts = vty->index;
@@ -2694,7 +2694,7 @@
"cell reselection hysteresis <0-14>",
CELL_STR "Cell re-selection parameters\n"
"Cell Re-Selection Hysteresis in dB\n"
- "Cell Re-Selection Hysteresis in dB")
+ "Cell Re-Selection Hysteresis in dB\n")
{
struct gsm_bts *bts = vty->index;
@@ -2708,7 +2708,7 @@
"Minimum RxLev needed for cell access\n"
"Minimum RxLev needed for cell access\n"
"Minimum RxLev needed for cell access\n"
- "Minimum RxLev needed for cell access (better than -110dBm)")
+ "Minimum RxLev needed for cell access (better than -110dBm)\n")
{
struct gsm_bts *bts = vty->index;
@@ -2749,7 +2749,7 @@
"temporary offset <0-60>",
"Cell selection temporary negative offset\n"
"Cell selection temporary negative offset\n"
- "Cell selection temporary negative offset in dB")
+ "Cell selection temporary negative offset in dB\n")
{
struct gsm_bts *bts = vty->index;
@@ -2763,7 +2763,7 @@
"temporary offset infinite",
"Cell selection temporary negative offset\n"
"Cell selection temporary negative offset\n"
- "Sets cell selection temporary negative offset to infinity")
+ "Sets cell selection temporary negative offset to infinity\n")
{
struct gsm_bts *bts = vty->index;
@@ -2793,7 +2793,7 @@
"Cell selection penalty time\n"
"Set cell selection penalty time to reserved value 31, "
"(indicate that CELL_RESELECT_OFFSET is subtracted from C2 "
- "and TEMPORARY_OFFSET is ignored)")
+ "and TEMPORARY_OFFSET is ignored)\n")
{
struct gsm_bts *bts = vty->index;
@@ -2840,7 +2840,7 @@
GPRS_TEXT
"GPRS Cell Settings\n"
"GPRS BSSGP VC Identifier\n"
- "GPRS BSSGP VC Identifier")
+ "GPRS BSSGP VC Identifier\n")
{
/* ETSI TS 101 343: values 0 and 1 are reserved for signalling and PTM */
struct gsm_bts *bts = vty->index;
@@ -2859,7 +2859,7 @@
"gprs nsei <0-65535>",
GPRS_TEXT
"GPRS NS Entity Identifier\n"
- "GPRS NS Entity Identifier")
+ "GPRS NS Entity Identifier\n")
{
struct gsm_bts *bts = vty->index;
@@ -2880,7 +2880,7 @@
"gprs nsvc <0-1> nsvci <0-65535>",
GPRS_TEXT NSVC_TEXT
"NS Virtual Connection Identifier\n"
- "GPRS NS VC Identifier")
+ "GPRS NS VC Identifier\n")
{
struct gsm_bts *bts = vty->index;
int idx = atoi(argv[0]);
@@ -3131,7 +3131,7 @@
"gprs 11bit_rach_support_for_egprs (0|1)",
GPRS_TEXT "11 bit RACH options\n"
"Disable 11 bit RACH for EGPRS\n"
- "Enable 11 bit RACH for EGPRS")
+ "Enable 11 bit RACH for EGPRS\n")
{
struct gsm_bts *bts = vty->index;
@@ -4200,8 +4200,8 @@
DEFUN(cfg_trx,
cfg_trx_cmd,
"trx <0-255>",
- TRX_TEXT
- "Select a TRX to configure")
+ TRX_TEXT
+ "Select a TRX to configure\n")
{
int trx_nr = atoi(argv[0]);
struct gsm_bts *bts = vty->index;
diff --git a/src/osmo-bsc/osmo_bsc_vty.c b/src/osmo-bsc/osmo_bsc_vty.c
index e656d70..c372b48 100644
--- a/src/osmo-bsc/osmo_bsc_vty.c
+++ b/src/osmo-bsc/osmo_bsc_vty.c
@@ -539,7 +539,7 @@
cfg_msc_acc_lst_name_cmd,
"access-list-name NAME",
"Set the name of the access list to use.\n"
- "The name of the to be used access list.")
+ "The name of the to be used access list.\n")
{
struct bsc_msc_data *msc = bsc_msc_data(vty);
@@ -792,7 +792,7 @@
cfg_bsc_acc_lst_name_cmd,
"access-list-name NAME",
"Set the name of the access list to use.\n"
- "The name of the to be used access list.")
+ "The name of the to be used access list.\n")
{
struct osmo_bsc_data *bsc = osmo_bsc_data(vty);
--
To view, visit https://gerrit.osmocom.org/c/osmo-bsc/+/17636
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-bsc
Gerrit-Branch: master
Gerrit-Change-Id: I00a183078679db50567286a78c9e4f9afa3466c6
Gerrit-Change-Number: 17636
Gerrit-PatchSet: 1
Gerrit-Owner: osmith <osmith at sysmocom.de>
Gerrit-MessageType: newchange
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20200327/069baab1/attachment.htm>