Change in osmo-trx[master]: doc: clarify number of channels on B210 with multi-arfcn enabled

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.

laforge gerrit-no-reply at lists.osmocom.org
Tue Jan 7 22:25:02 UTC 2020


laforge has submitted this change. ( https://gerrit.osmocom.org/c/osmo-trx/+/16667 )

Change subject: doc: clarify number of channels on B210 with multi-arfcn enabled
......................................................................

doc: clarify number of channels on B210 with multi-arfcn enabled

Change-Id: I082d4d8c346f1be1569fe63baa856029e439cb2c
---
M doc/manuals/chapters/configuration.adoc
1 file changed, 5 insertions(+), 4 deletions(-)

Approvals:
  Jenkins Builder: Verified
  laforge: Looks good to me, approved



diff --git a/doc/manuals/chapters/configuration.adoc b/doc/manuals/chapters/configuration.adoc
index 2f4986f..a194537 100644
--- a/doc/manuals/chapters/configuration.adoc
+++ b/doc/manuals/chapters/configuration.adoc
@@ -46,15 +46,16 @@
 added specifically in commit `76764278169d252980853251daeb9f1ba0c246e1`.
 
 This feature is useful for instance if you want to run more than 1 TRX with an
-Ettus B200 device, or 2 TRX with an Ettus B210 device, since they support only 1
-and 2 physical RF channels respectively. No device from other providers or even
-other devices than B200 and B210 from Ettus are known to support this feature.
+Ettus B200 device, or more than 2 TRXs with an Ettus B210 device, since they
+support only 1 and 2 physical RF channels respectively. No device from other
+providers or even other devices than B200 and B210 from Ettus are known to
+support this feature.
 
 With multi-ARFCN enabled, ARFCN spacing is fixed at 800 kHz or 4 GSM channels.
 So if TRX-0 is set to ARFCN 51, TRX-1 _must_ be set to 55, and so on. Up to
 three ARFCN's is supported for multi-TRX.
 
-From BTS and BSC point of view, supporting multiple TRX through multi-ARFCN
+From BTS and BSC point of view, supporting multiple TRXs through multi-ARFCN
 feature in OsmoTRX doesn't make any difference from a regular multi-TRX setup,
 leaving apart of course the mentioned ARFCN limitations explained above and as a
 consequence physical installation and operational differences.

-- 
To view, visit https://gerrit.osmocom.org/c/osmo-trx/+/16667
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings

Gerrit-Project: osmo-trx
Gerrit-Branch: master
Gerrit-Change-Id: I082d4d8c346f1be1569fe63baa856029e439cb2c
Gerrit-Change-Number: 16667
Gerrit-PatchSet: 5
Gerrit-Owner: pespin <pespin at sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: laforge <laforge at osmocom.org>
Gerrit-Reviewer: pespin <pespin at sysmocom.de>
Gerrit-CC: fixeria <axilirator at gmail.com>
Gerrit-MessageType: merged
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20200107/e4a8ce40/attachment.htm>


More information about the gerrit-log mailing list