This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
laforge gerrit-no-reply at lists.osmocom.orglaforge has submitted this change. ( https://gerrit.osmocom.org/c/osmo-gsm-manuals/+/21700 )
Change subject: Add common chapters on GB interface variants and SGSN pool
......................................................................
Add common chapters on GB interface variants and SGSN pool
The chapters are not 100% finished, as there is still some
implementation work going on in terms of the libosmogb 'ns2' code
as well as the introduction of the SGSN pool feature to osmo-gbproxy.
Change-Id: I0ba2ed2a72db52a7282f4f1055812644421b2a98
---
A common/chapters/gb-ip-sns.msc
A common/chapters/gb-pool.adoc
A common/chapters/gb-variants.adoc
A common/images/gb-concepts-pool.pdf
A common/images/gb-ip-nsvc.pdf
5 files changed, 279 insertions(+), 0 deletions(-)
Approvals:
Jenkins Builder: Verified
pespin: Looks good to me, but someone else must approve
laforge: Looks good to me, approved
diff --git a/common/chapters/gb-ip-sns.msc b/common/chapters/gb-ip-sns.msc
new file mode 100644
index 0000000..f3fc2c4
--- /dev/null
+++ b/common/chapters/gb-ip-sns.msc
@@ -0,0 +1,38 @@
+msc {
+ hscale="2";
+ pcu [label="PCU"], sgsn [label="SGSN"];
+
+ |||;
+ pcu rbox sgsn [label="(1) Initial Configuration after [re] start of PCU with NSEI 1024"];
+ --- [label="SNS-Size procedure to inform SGSN of PCU NS-VC capacity"];
+ pcu -> sgsn [label="SNS-SIZE (NSEI=1234, MAX-NR-NSVCS=8, NUM-IP-EP=1)"];
+ pcu <- sgsn [label="SNS-SIZE-ACK (NSEI=1234)"];
+ --- [label="PCU-originated SNS-CONFIG: Configure SGSN downlink flows"];
+ pcu -> sgsn [label="SNS-CONFIG (NSEI=1234, List of PCU side IPv4/IPv6 Elements)"];
+ pcu <- sgsn [label="SNS-CONFIG-ACK"];
+ --- [label="SGSN-originated SNS-CONFIG: Configure PCU uplink flows"];
+ pcu <- sgsn [label="SNS-CONFIG (NSEI=1234, List of SGSN side IPv4/IPv6 Elements)"];
+ pcu -> sgsn [label="SNS-CONFIG-ACK"];
+ |||;
+ pcu rbox sgsn [label="(2) Establishment of full mesh of NS-VCs: Each PCU side EP to each SGSN side EP"];
+ --- [label="NS-ALIVE procedure to the first SGSN-side IPv4 Endpoint"];
+ pcu -> sgsn [label="NS-ALIVE"];
+ pcu <- sgsn [label="NS-ALIVE-ACK"];
+ --- [label="NS-ALIVE procedure to the second SGSN-side IPv4 Endpoint"];
+ pcu -> sgsn [label="NS-ALIVE"];
+ pcu <- sgsn [label="NS-ALIVE-ACK"];
+ |||;
+ pcu rbox sgsn [label="(3) Establishment of BSGGP Virtual Connections (BVC)"];
+ --- [label="BVC-RESET of the (PCU global) Signaling BVC"];
+ pcu -> sgsn [label="NS-UNITDATA( BVC-RESET (BVCI=0) )"];
+ pcu <- sgsn [label="NS-UNITDATA( BVC-RESET-ACK (BVCI=0) )"];
+ |||;
+ --- [label="BVC-RESET of the PTP BVC of the first cell in the BSS"];
+ pcu -> sgsn [label="NS-UNITDATA( BVC-RESET (BVCI=999, RA-ID 262-42-13135-0) )"];
+ pcu <- sgsn [label="NS-UNITDATA( BVC-RESET-ACK (BVCI=999) )"];
+ ...;
+ --- [label="BVC-RESET of the PTP BVC of the Nth cell in the BSS"];
+ pcu -> sgsn [label="NS-UNITDATA( BVC-RESET (BVCI=543, RA-ID 262-42-24675-0) )"];
+ pcu <- sgsn [label="NS-UNITDATA( BVC-RESET-ACK (BVCI=543) )"];
+
+}
diff --git a/common/chapters/gb-pool.adoc b/common/chapters/gb-pool.adoc
new file mode 100644
index 0000000..1a9fb87
--- /dev/null
+++ b/common/chapters/gb-pool.adoc
@@ -0,0 +1,62 @@
+[[gb-sgsn-pool]]
+== Gb interface in SGSN Pooling
+
+SGSN Pooling is a modern optional extension of the 3GPP GERAN
+architecture. It is officially referred-to as _Intra Domain Connection
+of RAN Nodes to Multiple CN Nodes_. It requires The use of IP-SNS and
+does not support legacy or non-standard Gb variants.
+
+Without this optional feature, a given PCU/BSS always connects to one
+SGSN via a Gb interface. All traffic is handled through that one
+interface.
+
+While the NS-level load sharing function and the _weights_ of the IP-SNS
+allow for load distribution between different user plane entities, there
+was demand for additional scalability and fail-over capabilities leading
+to the SGSN pooling feature.
+
+The major changes introduced to the Gb interface by SGSN pooling are as
+follows:
+
+* There is a separate NSE in the BSS for each of the SGSNs in the pool,
+ creating a 1:1 relationship between BSS-NSE and SGSN.
+* Each of those per-SGSN NSEs has it's own NS-VCGs and NS-VCs, unrelated
+ to those of the other NSEs
+* Each of those per-SGSN NSEs has it's own Signaling BVC
+* Each Cell in the BSS has one PTP BVC _per SGSN in the pool_
+
+This relationship is illustrated in <<fig-gb-pool>> below.
+
+[[fig-gb-pool]]
+.Gb interface concepts when SGSN pooling feature is used (from 3GPP TS 48.016)
+image::./common/images/gb-concepts-pool.pdf[]
+
+Looking strictly at the Gb interface, this means that there is a completely
+separate Gb interface between each BSS and each pool member SGSN. All of the
+procedures explained in <<gb-ip-sns>> hence occur N number of times to N number
+of SGSN pool members.
+
+=== Status of SGSN Pool support in Osmocom
+
+==== osmo-pcu
+
+There is currently no direct support for SGSN pooling in `osmo-pcu`
+itself. However, as of December 2020, `osmo-gbproxy` is being extended
+with SGSN pooling support.
+
+This means that SGSN pooling can be added to any `osmo-pcu` based
+deployment by introducing `osmo-gbproxy` between `osmo-pcu` and the SGSN.
+
+The use of `osmo-gbproxy` also has the added benefit that all Gb
+interfaces from various PCUs are aggregated into one Gb interface
+towards (each) SGSN. Most deployments are used to such a _one interface
+per BSS_ approach as they are used to the BSC-colocated PCU architecture
+and not to the BTS-colocated PCU architecture as implemented in Osmocom.
+
+==== osmo-gbproxy
+
+FIXME
+
+==== osmo-sgsn
+
+FIXME
diff --git a/common/chapters/gb-variants.adoc b/common/chapters/gb-variants.adoc
new file mode 100644
index 0000000..dc978f6
--- /dev/null
+++ b/common/chapters/gb-variants.adoc
@@ -0,0 +1,179 @@
+[[gb_variants]]
+== Gb interface variants
+
+There are a couple of variants of the Gb interface out there. This
+section tries to provide an overview into what those variants are, how
+they differ from each other and how to configure Osmocom software
+accordingly.
+
+The two peers involved in any Gb interface must always be in agreement
+about the specific Gb interface variant before they are able to
+connect.
+
+=== Gb over Frame Relay over E1/T1
+
+Historically, this is the first Gb interface that was specified as part
+of GSM Release 97 when GPRS was first introduced.
+
+Like all other terrestrial GSM interfaces, it uses circuit-switched
+technology from the PDH/ISDN family of systems: E1 or T1 lines as per
+ITU-T G.703 / G.704.
+
+GSM TS 08.16 and later <<3gpp-ts-48-016>> specify that Frame Relay (FR)
+shall be used as transport layer between the E1/T1 bit-stream and the
+NS-level Gb messages.
+
+Two peer entities such as a GPRS BSS and a SGSN are interconnected by a
+NS-VCG (Virtual Connection Group) consisting of any number of NS-VCs
+(Virtual Connections).
+
+Each NS-VC in turn operates over a Frame Relay Permanent Virtual Circuit
+(PVC), identified by its DLCI (Data Link Connection Identifier).
+
+The protocol stacking is BSSGP/NS/FR/E1.
+
+.Example: Gb over Frame Relay configuration
+----
+ns
+ nse 2001 nsvci 11 frnet hdlcnet1 dlci 16 <1>
+ nse 2001 nsvci 12 frnet hdlcnet2 dlci 17
+ nse 2001 nsvci 13 frnet hdlcnet3 dlci 18
+ nse 2001 nsvci 14 frnet hdlcnet4 dlci 19
+ nse 2002 nsvci 15 frnet hdlcnet5 dlci 20 <2>
+ nse 2002 nsvci 16 frnet hdlcnet6 dlci 21
+ nse 2003 nsvci 17 frnet hdlcnet7 dlci 22 <3>
+ nse 2003 nsvci 18 frnet hdlcnet8 dlci 23
+----
+<1> one NSE (2001) with four NS-VCI (11..14) on hdlcnet1..4 with their respective DLCI
+<2> another NSE (2002) with two NS-VCI (15..16) on hdlcnet5..6 with their respective DLCI
+<3> another NSE (2003) with two NS-VCI (17..18) on hdlcnet7..8 with their respective DLCI
+
+==== FR Driver Support
+
+The Osmocom NS/FR support currently requires the individual Frame Relay
+Links to be exposed as Linux kernel HDLC net-devices. The Osmocom NS
+implementation has to be instructed which `hdlcX` network devices it
+shall use for each NS-VC, and which DLCIs to use on them.
+
+The Linux kernel Frame Relay LMI support (which only implements the user
+role anyway) is not used. Instead, the ITU-T Q.933 LMI is implemented
+as part of the Osmocom NS code in libosmogb. You must hence use
+`sethdlc hdlcX fr lmi none` to configure the HDLC net-devices for use
+with Osmocom. The net-devices must also be _up_, e.g. using the
+`ip link set hdlcX up` command in some system start-up script.
+
+As the Osmocom Gb implementation uses AF_PACKET sockets on those
+`hdlcX` network interfaces, the respective program must be running with
+`CAP_NET_RAW` capability.
+
+=== Gb over Frame Relay encapsulated in GRE/IP
+
+This is a variant of the Gb-over-FR specified above. However, an
+external router (e.g. certain ancient Cisco routers) is used to take the
+Frame Relay frames from the physical E1/T1 TDM circuit and wrap them
+into the GRE encapsulation as per IETF RFC 2784.
+
+Those GRE/IP messages from the external Cisco router are then passed to
+the Osmocom Gb stack (e.g. to `osmo-gbproxy`).
+
+The protocol stacking is BSSGP/NS/FR/GRE/IP.
+
+FIXME: Example configuration
+
+----
+ns
+ encapsulation framerelay-gre enabled 1
+ encapsulation framerelay-gre local-ip 127.0.0.1
+----
+
+
+=== Gb over IP "ip.access style"
+
+This is a non-standard variant of Gb which is not found in the GSM/3GPP
+specifications.
+
+It uses an UDP/IP based transport layer, while not yet implementing the
+IP-SNS that is normally required by a true 3GPP Gb over IP interface
+described further below. Hence, this variant resembles an intermediate
+state where a Gb interface originally designed for Frame Relay is used
+over IP without any of the IP-specific procedures specified by 3GPP.
+
+The major difference to 3GPP Gb over IP specified below are:
+
+* No support for the IP-SNS and its SNS-SIZE, SNS-ADD, SNS-DELETE,
+ SNS-WEIGHT procedures
+* Use of the NS-RESET, NS-BLOCK and NS-UNBLOCK procedures which are
+ normally forbidden over an IP network.
+
+The protocol stacking is BSSGP/NS/UDP/IP.
+
+FIXME: Full example configuration
+
+----
+ns
+ encapsulation udp local-ip 127.0.0.1
+ encapsulation udp local-port 23000
+----
+
+[[gb-ip-sns]]
+=== 3GPP Gb over IP with IP-SNS
+
+This is the only official, 3GPP-standardized way of speaking a Gb
+interface over IP based transport.
+
+It features the IP Sub-Network Service (IP-SNS) in order to dynamically
+exchange information about IP endpoints (IP+port tuples) between the Gb
+interface peers. This means that normally only one basic / first IP
+endpoint needs to be configured. All additional IP endpoints and their
+relative weight for load distribution are then negotiated via the
+IP-SNS.
+
+The major differences of this true IP based Gb compared to any of the
+above are:
+
+* No use of the NS-RESET, NS-BLOCK or NS-UNBLOCK procedures
+* Ability to use some NS-VCs only for signaling (data_weight=0) or only
+ for user plane traffic (signaling_weight=0). This helps with SGSNs
+ that have an internal control/user plane separation architecture.
+
+Once the IP endpoints of the peers are known to each other, A full mesh
+of NS-VCs between all PCU-side endpoints and all SGSN endpoints is
+established.
+
+<<fig-gb-sns-nsvcs>> below illustrates a deployment with two IP
+endpoints on both the BSS (PCU) and the SGSN, as well as the resulting
+four NS-VCs established between them.
+
+[[fig-gb-sns-nsvcs]]
+.IP sub-network relationship between NS-VCs and NS-VLs (from 3GPP TS 48.016)
+image::./common/images/gb-ip-nsvc.pdf[]
+
+The sequence of messages in an IP-SNS enabled Gb interface bring-up can
+be seen in <<fig-ip-sns-sequence>>. Here we have a PCU/BSS with a
+single IP endpoint and a SGSN with two IP endpoints, which results in
+only two NS-VC being established.
+
+Furthermore, for each of the cells in the BSS/PCU, we can see the
+BVC-RESET procedure for its corresponding PTP BVC.
+
+[[fig-ip-sns-sequence]]
+.Initialization of Gb interface using IP-SNS procedures
+[mscgen]
+----
+include::gb-ip-sns.msc[]
+----
+
+==== PCU Configuration
+
+FIXME: Full example configuration
+
+.Example: osmo-pcu configuration for use with IP-SNS
+----
+pcu
+ gb-dialect ip-sns
+----
+
+NOTE: The initial IP endpoint for osmo-pcu is not configured in the PCU
+itself, but in the BSC, who downloads the Gb interface configuration to
+the BTS during BTS OML start-up, which in turn passes it to the PCU over
+the unix domain socket between BTS and PCU
diff --git a/common/images/gb-concepts-pool.pdf b/common/images/gb-concepts-pool.pdf
new file mode 100644
index 0000000..d95f191
--- /dev/null
+++ b/common/images/gb-concepts-pool.pdf
Binary files differ
diff --git a/common/images/gb-ip-nsvc.pdf b/common/images/gb-ip-nsvc.pdf
new file mode 100644
index 0000000..32a0442
--- /dev/null
+++ b/common/images/gb-ip-nsvc.pdf
Binary files differ
--
To view, visit https://gerrit.osmocom.org/c/osmo-gsm-manuals/+/21700
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-gsm-manuals
Gerrit-Branch: master
Gerrit-Change-Id: I0ba2ed2a72db52a7282f4f1055812644421b2a98
Gerrit-Change-Number: 21700
Gerrit-PatchSet: 2
Gerrit-Owner: laforge <laforge at osmocom.org>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: daniel <dwillmann at sysmocom.de>
Gerrit-Reviewer: laforge <laforge at osmocom.org>
Gerrit-Reviewer: lynxis lazus <lynxis at fe80.eu>
Gerrit-Reviewer: pespin <pespin at sysmocom.de>
Gerrit-MessageType: merged
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20201214/ac3e63a0/attachment.htm>