This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
neels gerrit-no-reply at lists.osmocom.orgHello Jenkins Builder, 
I'd like you to reexamine a change. Please visit
    https://gerrit.osmocom.org/c/osmo-gsm-tester/+/21511
to look at the new patch set (#4).
Change subject: configure fixed ARFCN per bts
......................................................................
configure fixed ARFCN per bts
Remove ARFCNs as a concept from resource pool, assign a fixed ARFCN to
each BTS and TRX in the resource pools.
Using ARFCNs on specific bands as resources was an idea that is hard to
implement, because specific BTS dictate selection of bands which
influences which ARFCNs can be picked. That means reserving ARFCN
resources is only possible after reserving specific BTS resources, but
the tester is currently not capable of such two-stage resolution.
Writing handover tests, I got the problem that both BTS in a scenario
attempt to use the same ARFCN.
The by far easiest solution is to assign one fixed ARFCN to each BTS and
TRX. If ever needed, a scenario modifier can still configure different
ARFCNs.
(Due to uncertainty about OC2G operation stability, I prefer to leave
OC2G on ARFCN 50, as it happened to end up being configured before this
patch.)
Change-Id: I0a6c60544226f4261f9106013478d6a27fc39f38
---
M selftest/resource_test/conf/resources.conf
M selftest/resource_test/resource_test.ok
M selftest/resource_test/resource_test.py
M selftest/suite_test/resources.conf
M src/osmo_gsm_tester/core/schema.py
M src/osmo_gsm_tester/obj/bts_nanobts.py
M src/osmo_gsm_tester/obj/bts_oc2g.py
M sysmocom/defaults.conf
M sysmocom/resources.conf.prod
M sysmocom/resources.conf.rnd
10 files changed, 30 insertions(+), 179 deletions(-)
  git pull ssh://gerrit.osmocom.org:29418/osmo-gsm-tester refs/changes/11/21511/4
-- 
To view, visit https://gerrit.osmocom.org/c/osmo-gsm-tester/+/21511
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-gsm-tester
Gerrit-Branch: master
Gerrit-Change-Id: I0a6c60544226f4261f9106013478d6a27fc39f38
Gerrit-Change-Number: 21511
Gerrit-PatchSet: 4
Gerrit-Owner: neels <nhofmeyr at sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-CC: pespin <pespin at sysmocom.de>
Gerrit-MessageType: newpatchset
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20201210/b71a1f33/attachment.htm>