Build failed in Jenkins: master-simtrace2 » a1=default,a2=default,a3=default,a4=default,osmocom-master-debian9 #1008

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.

jenkins at lists.osmocom.org jenkins at lists.osmocom.org
Wed Dec 2 06:52:35 UTC 2020


See <https://jenkins.osmocom.org/jenkins/job/master-simtrace2/a1=default,a2=default,a3=default,a4=default,label=osmocom-master-debian9/1008/display/redirect>

Changes:


------------------------------------------
[...truncated 137.65 KB...]
UART_RX(00)
UART_RX(00)
UART_RX(07)
uart_enable(uart_chan=42, TX)
-I- 0: send_tpdu_header: a0 d2 00 00 07
-I- 0: flush_rx_buffer (5)
[L1]> 01 06 00 00 00 00 13 00 [L2]> 01 00 00 00 05 00 a0 d2 00 00 07 
    flags=1, data= a0 d2 00 00 07
UART_TX(d2)
uart_enable(uart_chan=42, RX)
UART_RX(00)
UART_RX(01)
UART_RX(02)
UART_RX(03)
UART_RX(04)
UART_RX(05)
UART_RX(06)
-I- 0: flush_rx_buffer (7)
[L1]> 01 06 00 00 00 00 15 00 [L2]> 02 00 00 00 07 00 00 01 02 03 04 05 06 
    flags=2, data= 00 01 02 03 04 05 06
UART_TX(90)
UART_TX(00)
uart_enable(uart_chan=42, RX)
uart_enable(uart_chan=42, RX)
-I- 0: CLK deactivated
-I- 0: CLK activated

==> transmitting APDU (HDR + PB + card-TX)
UART_RX(a0)
UART_RX(b2)
UART_RX(00)
UART_RX(00)
UART_RX(0a)
uart_enable(uart_chan=42, TX)
-I- 0: send_tpdu_header: a0 b2 00 00 0a
-I- 0: flush_rx_buffer (5)
[L1]> 01 06 00 00 00 00 13 00 [L2]> 01 00 00 00 05 00 a0 b2 00 00 0a 
    flags=1, data= a0 b2 00 00 0a
UART_TX(b2)
UART_TX(00)
UART_TX(01)
UART_TX(02)
UART_TX(03)
UART_TX(04)
UART_TX(05)
UART_TX(06)
UART_TX(07)
UART_TX(08)
UART_TX(09)
UART_TX(90)
UART_TX(00)
uart_enable(uart_chan=42, RX)
uart_enable(uart_chan=42, RX)
-I- 0: CLK deactivated
-I- 0: CLK activated

=============== HOST START  ==============
aclocal: warning: couldn't open directory 'm4': No such file or directory
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
configure.ac:20: installing './compile'
configure.ac:22: installing './config.guess'
configure.ac:22: installing './config.sub'
configure.ac:8: installing './install-sh'
configure.ac:8: installing './missing'
lib/Makefile.am: installing './depcomp'
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking if gcc supports -fvisibility=hidden... yes
checking for LIBOSMOCORE... yes
checking for LIBOSMOSIM... yes
checking for LIBOSMOUSB... yes
checking for LIBUSB... yes
CFLAGS="-g -O2 -Wall -fsanitize=address -fsanitize=undefined -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
CPPFLAGS=" -Wall -fsanitize=address -fsanitize=undefined -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating libosmo-simtrace2.pc
config.status: creating include/Makefile
config.status: creating src/Makefile
config.status: creating lib/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/simtrace2.spec
config.status: creating Makefile
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
echo 0.7.0.69-aadd > .version-t && mv .version-t .version
make  all-recursive
make[1]: Entering directory '/build/host'
Making all in include
make[2]: Entering directory '/build/host/include'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/build/host/include'
Making all in lib
make[2]: Entering directory '/build/host/lib'
  CC       apdu_dispatch.lo
  CC       gsmtap.lo
  CC       simtrace2_api.lo
  CC       usb_util.lo
  CCLD     libosmo-simtrace2.la
ar: `u' modifier ignored since `D' is the default (see `U')
make[2]: Leaving directory '/build/host/lib'
Making all in src
make[2]: Entering directory '/build/host/src'
  CC       simtrace2-cardem-pcsc.o
  CC       simtrace2_usb.o
  CC       simtrace2-sniff.o
  CCLD     simtrace2-list
  CCLD     simtrace2-sniff
  CCLD     simtrace2-cardem-pcsc
make[2]: Leaving directory '/build/host/src'
Making all in contrib
make[2]: Entering directory '/build/host/contrib'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/build/host/contrib'
make[2]: Entering directory '/build/host'
make[2]: Nothing to be done for 'all-am'.
make[2]: Leaving directory '/build/host'
make[1]: Leaving directory '/build/host'
make  dist-bzip2 am__post_remove_distdir='@:'
make[1]: Entering directory '/build/host'
if test -d "simtrace2-0.7.0.69-aadd"; then find "simtrace2-0.7.0.69-aadd" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "simtrace2-0.7.0.69-aadd" || { sleep 5 && rm -rf "simtrace2-0.7.0.69-aadd"; }; else :; fi
test -d "simtrace2-0.7.0.69-aadd" || mkdir "simtrace2-0.7.0.69-aadd"
 (cd include && make  top_distdir=../simtrace2-0.7.0.69-aadd distdir=../simtrace2-0.7.0.69-aadd/include \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[2]: Entering directory '/build/host/include'
make[2]: Leaving directory '/build/host/include'
 (cd lib && make  top_distdir=../simtrace2-0.7.0.69-aadd distdir=../simtrace2-0.7.0.69-aadd/lib \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[2]: Entering directory '/build/host/lib'
make[2]: Leaving directory '/build/host/lib'
 (cd src && make  top_distdir=../simtrace2-0.7.0.69-aadd distdir=../simtrace2-0.7.0.69-aadd/src \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[2]: Entering directory '/build/host/src'
make[2]: Leaving directory '/build/host/src'
 (cd contrib && make  top_distdir=../simtrace2-0.7.0.69-aadd distdir=../simtrace2-0.7.0.69-aadd/contrib \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[2]: Entering directory '/build/host/contrib'
make[2]: Leaving directory '/build/host/contrib'
make  \
  top_distdir="simtrace2-0.7.0.69-aadd" distdir="simtrace2-0.7.0.69-aadd" \
  dist-hook
make[2]: Entering directory '/build/host'
echo 0.7.0.69-aadd > simtrace2-0.7.0.69-aadd/.tarball-version
make[2]: Leaving directory '/build/host'
test -n "" \
|| find "simtrace2-0.7.0.69-aadd" -type d ! -perm -755 \
	-exec chmod u+rwx,go+rx {} \; -o \
  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
  ! -type d ! -perm -444 -exec /bin/bash /build/host/install-sh -c -m a+r {} {} \; \
|| chmod -R a+r "simtrace2-0.7.0.69-aadd"
tardir=simtrace2-0.7.0.69-aadd && ${TAR-tar} chof - "$tardir" | BZIP2=${BZIP2--9} bzip2 -c >simtrace2-0.7.0.69-aadd.tar.bz2
make[1]: Leaving directory '/build/host'
if test -d "simtrace2-0.7.0.69-aadd"; then find "simtrace2-0.7.0.69-aadd" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "simtrace2-0.7.0.69-aadd" || { sleep 5 && rm -rf "simtrace2-0.7.0.69-aadd"; }; else :; fi

=============== UPLOAD BUILD  ==============
Warning: Permanently added the ECDSA host key for IP address '[144.76.43.76]:48' to the list of known hosts.
Permission denied (publickey,keyboard-interactive).
rsync: connection unexpectedly closed (0 bytes received so far) [sender]
rsync error: unexplained error (code 255) at io.c(235) [sender=3.1.2]
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE



More information about the gerrit-log mailing list