Change in osmo-gsm-tester[master]: srs{ue, enb}.conf.tmpl: remove restriction of PHY threads for ZMQ

[srs_andre]

srs_andre has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-gsm-tester/+/19857 )


Change subject: srs{ue,enb}.conf.tmpl: remove restriction of PHY threads for ZMQ
......................................................................

srs{ue,enb}.conf.tmpl: remove restriction of PHY threads for ZMQ

we now support any number of PHY threads also with ZMQ operation

Change-Id: I31abfce742f757179fbfe4099cd0a934db4e63d7
---
M src/osmo_gsm_tester/templates/srsenb.conf.tmpl
M src/osmo_gsm_tester/templates/srsue.conf.tmpl
2 files changed, 4 insertions(+), 8 deletions(-)



  git pull ssh://gerrit.osmocom.org:29418/osmo-gsm-tester refs/changes/57/19857/1

diff --git a/src/osmo_gsm_tester/templates/srsenb.conf.tmpl b/src/osmo_gsm_tester/templates/srsenb.conf.tmpl
index b58db53..81753d6 100644
--- a/src/osmo_gsm_tester/templates/srsenb.conf.tmpl
+++ b/src/osmo_gsm_tester/templates/srsenb.conf.tmpl
@@ -249,7 +249,7 @@
 #
 # pusch_max_its:        Maximum number of turbo decoder iterations (Default 4)
 # pusch_8bit_decoder:   Use 8-bit for LLR representation and turbo decoder trellis computation (Experimental)
-# nof_phy_threads:      Selects the number of PHY threads (maximum 4, minimum 1, default 2)
+# nof_phy_threads:      Selects the number of PHY threads (maximum 4, minimum 1, default 3)
 # metrics_period_secs:  Sets the period at which metrics are requested from the eNB.
 # metrics_csv_enable:   Write eNB metrics to CSV file.
 # metrics_csv_filename: File path to use for CSV metrics.
@@ -265,9 +265,7 @@
 [expert]
 #pusch_max_its        = 8 # These are half iterations
 #pusch_8bit_decoder   = false
-% if enb.get('rf_dev_type') == 'zmq':
-nof_phy_threads  = 1
-% endif
+#nof_phy_threads = 3
 #metrics_period_secs  = 1
 #metrics_csv_enable   = false
 #metrics_csv_filename = /tmp/enb_metrics.csv
diff --git a/src/osmo_gsm_tester/templates/srsue.conf.tmpl b/src/osmo_gsm_tester/templates/srsue.conf.tmpl
index 3a43f17..05c6c55 100644
--- a/src/osmo_gsm_tester/templates/srsue.conf.tmpl
+++ b/src/osmo_gsm_tester/templates/srsue.conf.tmpl
@@ -293,7 +293,7 @@
 #                                   refs:  use difference between noise references and noiseless (after filtering)
 #                                   empty: use empty subcarriers in the boarder of pss/sss signal
 # pdsch_max_its:        Maximum number of turbo decoder iterations (Default 4)
-# nof_phy_threads:      Selects the number of PHY threads (maximum 4, minimum 1, default 2)
+# nof_phy_threads:      Selects the number of PHY threads (maximum 4, minimum 1, default 3)
 # equalizer_mode:       Selects equalizer mode. Valid modes are: "mmse", "zf" or any
 #                       non-negative real number to indicate a regularized zf coefficient.
 #                       Default is MMSE.
@@ -331,9 +331,7 @@
 #snr_ema_coeff       = 0.1
 #snr_estim_alg       = refs
 #pdsch_max_its       = 8    # These are half iterations
-% if ue.get('rf_dev_type') == 'zmq':
-nof_phy_threads = 1
-% endif
+#nof_phy_threads     = 3
 #equalizer_mode      = mmse
 #sfo_ema             = 0.1
 #sfo_correct_period  = 10

-- 
To view, visit https://gerrit.osmocom.org/c/osmo-gsm-tester/+/19857
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings

Gerrit-Project: osmo-gsm-tester
Gerrit-Branch: master
Gerrit-Change-Id: I31abfce742f757179fbfe4099cd0a934db4e63d7
Gerrit-Change-Number: 19857
Gerrit-PatchSet: 1
Gerrit-Owner: srs_andre <andre at softwareradiosystems.com>
Gerrit-MessageType: newchange
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20200828/41b80b65/attachment.htm>