This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
dexter gerrit-no-reply at lists.osmocom.orgdexter has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/15639 Change subject: MGCP_Test: Make RTP bwe/oa formt conversation tests more robust ...................................................................... MGCP_Test: Make RTP bwe/oa formt conversation tests more robust The following testcases create perform the format conversation are carried out using two bidirectional connections on one MGW endpoint. MGCP_Test.TC_amr_oa_bwe_rtp_conversion MGCP_Test.TC_amr_oa_oa_rtp_conversion MGCP_Test.TC_amr_bwe_bwe_rtp_conversion The test is programmed in a way that the TTCN3 side of the RTP emulation also works in bidirectional mode. This is prone to run into a race condition when the RX side is activated but the TX side is already transmitting. However, in order to test if the RTP format conversion works we do not need to test both directions at the same time. Its perfectly fine to do the one direction first and then do the other afterwards. Lets also add some guard time whil switching the RTP flows. Change-Id: Idf257cfc1ab45a7f0fb6e1a2f6426f1b3145879b --- M mgw/MGCP_Test.ttcn 1 file changed, 20 insertions(+), 6 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-ttcn3-hacks refs/changes/39/15639/1 diff --git a/mgw/MGCP_Test.ttcn b/mgw/MGCP_Test.ttcn index 7ddb6ea..41def03 100644 --- a/mgw/MGCP_Test.ttcn +++ b/mgw/MGCP_Test.ttcn @@ -2012,7 +2012,7 @@ f_init(ep); - /* from us to MGW */ + /* Connection #0 (Bidirectional) */ flow[0] := valueof(t_RtpFlow(mp_local_ip, mp_remote_ip, 112, "AMR/8000")); /* bind local RTP emulation sockets */ flow[0].em.portnr := 10000; @@ -2023,7 +2023,7 @@ flow[0].fmtp := fmtp0; f_flow_create(RTPEM[0], ep, call_id, "sendrecv", flow[0]); - /* from MGW back to us */ + /* Connection #1 (Bidirectional) */ flow[1] := valueof(t_RtpFlow(mp_local_ip, mp_remote_ip, 112, "AMR/8000")); flow[1].em.portnr := 20000; flow[1].rtp_cfg := c_RtpemDefaultCfg; @@ -2033,17 +2033,31 @@ flow[1].fmtp := fmtp1; f_flow_create(RTPEM[1], ep, call_id, "sendrecv", flow[1]); - f_rtpem_mode(RTPEM[1], RTPEM_MODE_BIDIR); - f_rtpem_mode(RTPEM[0], RTPEM_MODE_BIDIR); - + /* Send RTP packets to connection #0, receive on connection #1 */ + f_rtpem_mode(RTPEM[1], RTPEM_MODE_RXONLY); + f_sleep(0.5); + f_rtpem_mode(RTPEM[0], RTPEM_MODE_TXONLY); f_sleep(1.0); + f_rtpem_mode(RTPEM[0], RTPEM_MODE_NONE); + f_sleep(0.5); + f_rtpem_mode(RTPEM[1], RTPEM_MODE_NONE); + /* Send RTP packets to connection #1, receive on connection #0 */ + f_rtpem_mode(RTPEM[0], RTPEM_MODE_RXONLY); + f_sleep(0.5); + f_rtpem_mode(RTPEM[1], RTPEM_MODE_TXONLY); + f_sleep(1.0); + f_rtpem_mode(RTPEM[1], RTPEM_MODE_NONE); + f_sleep(0.5); + f_rtpem_mode(RTPEM[0], RTPEM_MODE_NONE); + + /* Remove RTP flows and check statistics */ f_flow_delete(RTPEM[0]); f_flow_delete(RTPEM[1], ep, call_id); + /* Check for errors */ stats[0] := f_rtpem_stats_get(RTPEM[0]); stats[1] := f_rtpem_stats_get(RTPEM[1]); - f_rtpem_stats_err_check(stats[0]); f_rtpem_stats_err_check(stats[1]); -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/15639 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: Idf257cfc1ab45a7f0fb6e1a2f6426f1b3145879b Gerrit-Change-Number: 15639 Gerrit-PatchSet: 1 Gerrit-Owner: dexter <pmaier at sysmocom.de> Gerrit-MessageType: newchange -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20191001/1053164a/attachment.htm>