Change in ...docker-playground[master]: Have only one bts/bsc configured in osmo-bsc and bscnat

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.

daniel gerrit-no-reply at lists.osmocom.org
Wed Jun 19 16:27:10 UTC 2019 

daniel has uploaded this change for review. ( https://gerrit.osmocom.org/c/docker-playground/+/14546


Change subject: Have only one bts/bsc configured in osmo-bsc and bscnat
......................................................................

Have only one bts/bsc configured in osmo-bsc and bscnat

The way our counter reporting works is that each counter group is
reported even if the same one exists multiple times. To avoid that
change the default config (used by regen_doc.sh) to only configure one
bts / bsc.

Change-Id: I57468d983580b5ed4f15961ac1eac9bed9096556
Related: OS#1700
---
M osmo-bsc-master/osmo-bsc.cfg
M osmo-nitb-master/bscs.config
2 files changed, 0 insertions(+), 194 deletions(-)



  git pull ssh://gerrit.osmocom.org:29418/docker-playground refs/changes/46/14546/1

diff --git a/osmo-bsc-master/osmo-bsc.cfg b/osmo-bsc-master/osmo-bsc.cfg
index 7ce9173..71516dd 100644
--- a/osmo-bsc-master/osmo-bsc.cfg
+++ b/osmo-bsc-master/osmo-bsc.cfg
@@ -157,186 +157,6 @@
    timeslot 7
     phys_chan_config PDCH
     hopping enabled 0
- bts 1
-  type sysmobts
-  band DCS1800
-  cell_identity 1
-  location_area_code 2
-  dtx uplink force
-  dtx downlink
-  base_station_id_code 63
-  ms max power 15
-  cell reselection hysteresis 4
-  rxlev access min 0
-  radio-link-timeout 32
-  channel allocator ascending
-  rach tx integer 9
-  rach max transmission 7
-  channel-descrption attach 1
-  channel-descrption bs-pa-mfrms 5
-  channel-descrption bs-ag-blks-res 1
-  early-classmark-sending forbidden
-  ip.access unit_id 1235 0
-  oml ip.access stream_id 255 line 0
-  neighbor-list mode manual-si5
-  neighbor-list add arfcn 100
-  neighbor-list add arfcn 200
-  si5 neighbor-list add arfcn 10
-  si5 neighbor-list add arfcn 20
-  codec-support fr
-  gprs mode gprs
-  gprs 11bit_rach_support_for_egprs 0
-  gprs routing area 0
-  gprs network-control-order nc0
-  gprs cell bvci 1235
-  gprs cell timer blocking-timer 3
-  gprs cell timer blocking-retries 3
-  gprs cell timer unblocking-retries 3
-  gprs cell timer reset-timer 3
-  gprs cell timer reset-retries 3
-  gprs cell timer suspend-timer 10
-  gprs cell timer suspend-retries 3
-  gprs cell timer resume-timer 10
-  gprs cell timer resume-retries 3
-  gprs cell timer capability-update-timer 10
-  gprs cell timer capability-update-retries 3
-  gprs nsei 1235
-  gprs ns timer tns-block 3
-  gprs ns timer tns-block-retries 3
-  gprs ns timer tns-reset 3
-  gprs ns timer tns-reset-retries 3
-  gprs ns timer tns-test 30
-  gprs ns timer tns-alive 3
-  gprs ns timer tns-alive-retries 10
-  gprs nsvc 0 nsvci 1235
-  gprs nsvc 0 local udp port 23000
-  gprs nsvc 0 remote udp port 23000
-  gprs nsvc 0 remote ip 192.168.100.239
-  gprs nsvc 1 nsvci 0
-  gprs nsvc 1 local udp port 0
-  gprs nsvc 1 remote udp port 0
-  gprs nsvc 1 remote ip 0.0.0.0
-  no force-combined-si
-  trx 0
-   rf_locked 0
-   arfcn 871
-   nominal power 23
-   max_power_red 20
-   rsl e1 tei 0
-   timeslot 0
-    phys_chan_config CCCH+SDCCH4
-    hopping enabled 0
-   timeslot 1
-    phys_chan_config TCH/F
-    hopping enabled 0
-   timeslot 2
-    phys_chan_config TCH/F
-    hopping enabled 0
-   timeslot 3
-    phys_chan_config TCH/F
-    hopping enabled 0
-   timeslot 4
-    phys_chan_config TCH/F
-    hopping enabled 0
-   timeslot 5
-    phys_chan_config TCH/F
-    hopping enabled 0
-   timeslot 6
-    phys_chan_config PDCH
-    hopping enabled 0
-   timeslot 7
-    phys_chan_config PDCH
-    hopping enabled 0
- bts 2
-  type sysmobts
-  band DCS1800
-  cell_identity 1
-  location_area_code 1
-  dtx uplink force
-  dtx downlink
-  base_station_id_code 63
-  ms max power 15
-  cell reselection hysteresis 4
-  rxlev access min 0
-  radio-link-timeout 32
-  channel allocator ascending
-  rach tx integer 9
-  rach max transmission 7
-  channel-descrption attach 1
-  channel-descrption bs-pa-mfrms 5
-  channel-descrption bs-ag-blks-res 1
-  early-classmark-sending forbidden
-  ip.access unit_id 1236 0
-  oml ip.access stream_id 255 line 0
-  neighbor-list mode manual-si5
-  neighbor-list add arfcn 100
-  neighbor-list add arfcn 200
-  si5 neighbor-list add arfcn 10
-  si5 neighbor-list add arfcn 20
-  codec-support fr
-  gprs mode gprs
-  gprs 11bit_rach_support_for_egprs 0
-  gprs routing area 0
-  gprs network-control-order nc0
-  gprs cell bvci 1236
-  gprs cell timer blocking-timer 3
-  gprs cell timer blocking-retries 3
-  gprs cell timer unblocking-retries 3
-  gprs cell timer reset-timer 3
-  gprs cell timer reset-retries 3
-  gprs cell timer suspend-timer 10
-  gprs cell timer suspend-retries 3
-  gprs cell timer resume-timer 10
-  gprs cell timer resume-retries 3
-  gprs cell timer capability-update-timer 10
-  gprs cell timer capability-update-retries 3
-  gprs nsei 1236
-  gprs ns timer tns-block 3
-  gprs ns timer tns-block-retries 3
-  gprs ns timer tns-reset 3
-  gprs ns timer tns-reset-retries 3
-  gprs ns timer tns-test 30
-  gprs ns timer tns-alive 3
-  gprs ns timer tns-alive-retries 10
-  gprs nsvc 0 nsvci 1236
-  gprs nsvc 0 local udp port 23000
-  gprs nsvc 0 remote udp port 23000
-  gprs nsvc 0 remote ip 192.168.100.239
-  gprs nsvc 1 nsvci 0
-  gprs nsvc 1 local udp port 0
-  gprs nsvc 1 remote udp port 0
-  gprs nsvc 1 remote ip 0.0.0.0
-  no force-combined-si
-  trx 0
-   rf_locked 0
-   arfcn 871
-   nominal power 23
-   max_power_red 20
-   rsl e1 tei 0
-   timeslot 0
-    phys_chan_config CCCH+SDCCH4
-    hopping enabled 0
-   timeslot 1
-    phys_chan_config TCH/F
-    hopping enabled 0
-   timeslot 2
-    phys_chan_config TCH/F
-    hopping enabled 0
-   timeslot 3
-    phys_chan_config TCH/F
-    hopping enabled 0
-   timeslot 4
-    phys_chan_config TCH/F
-    hopping enabled 0
-   timeslot 5
-    phys_chan_config TCH/F
-    hopping enabled 0
-   timeslot 6
-    phys_chan_config PDCH
-    hopping enabled 0
-   timeslot 7
-    phys_chan_config PDCH
-    hopping enabled 0
 msc 0
  ip.access rtp-base 4000
  no bsc-welcome-text
diff --git a/osmo-nitb-master/bscs.config b/osmo-nitb-master/bscs.config
index 16cfa2b..b6770e8 100644
--- a/osmo-nitb-master/bscs.config
+++ b/osmo-nitb-master/bscs.config
@@ -6,17 +6,3 @@
   max-endpoints 32
   paging forbidden 0
   osmux on
- bsc 1
-  token BSC1
-  location_area_code 2
-  description bsc
-  max-endpoints 32
-  paging forbidden 0
-  osmux on
- bsc 2
-  token BSC2
-  location_area_code 3
-  description bsc
-  max-endpoints 32
-  paging forbidden 0
-  osmux on

-- 
To view, visit https://gerrit.osmocom.org/c/docker-playground/+/14546
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings

Gerrit-Project: docker-playground
Gerrit-Branch: master
Gerrit-Change-Id: I57468d983580b5ed4f15961ac1eac9bed9096556
Gerrit-Change-Number: 14546
Gerrit-PatchSet: 1
Gerrit-Owner: daniel <dwillmann at sysmocom.de>
Gerrit-MessageType: newchange
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20190619/16ce287c/attachment.htm>

More information about the gerrit-log mailing list