Change in ...openbsc[master]: manuals: Generate vty/counter documentation for osmo-bscnat

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.

daniel gerrit-no-reply at lists.osmocom.org
Wed Jun 19 11:33:38 UTC 2019


daniel has uploaded this change for review. ( https://gerrit.osmocom.org/c/openbsc/+/14530


Change subject: manuals: Generate vty/counter documentation for osmo-bscnat
......................................................................

manuals: Generate vty/counter documentation for osmo-bscnat

Change-Id: Ice7f15192a57e2c964d07d364732af888972ba0f
Depends: I44bb395009582f5e1399f277e15203553c2dcf78 (docker-playground.git)
Depends: I52c3cb2cdcfb143e71ac2c1aa40bb466e41a0f5c (docker-playground.git)
Related: OS#1700
---
A manuals/OsmoBSCNAT/chapters/counters_generated.adoc
M manuals/OsmoBSCNAT/vty/nat_vty_reference.xml
M openbsc/doc/regen_doc.sh
3 files changed, 2,391 insertions(+), 2,064 deletions(-)



  git pull ssh://gerrit.osmocom.org:29418/openbsc refs/changes/30/14530/1

diff --git a/manuals/OsmoBSCNAT/chapters/counters_generated.adoc b/manuals/OsmoBSCNAT/chapters/counters_generated.adoc
new file mode 100644
index 0000000..5d7db17
--- /dev/null
+++ b/manuals/OsmoBSCNAT/chapters/counters_generated.adoc
@@ -0,0 +1,98 @@
+
+// autogenerated by show asciidoc counters
+These counters and their description based on OsmoBSCNAT 1.2.0.17-6a61 (OsmoBSCNAT).
+
+=== Rate Counters
+
+// generating tables for rate_ctr_group
+// rate_ctr_group table NAT Access-List Statistics
+.nat:filter - NAT Access-List Statistics 
+[options="header"]
+|===
+| Name | Reference | Description
+| access-list:local-filter | <<nat:filter_access-list:local-filter>> | Rejected by rule for local
+| access-list:global-filter | <<nat:filter_access-list:global-filter>> | Rejected by rule for global
+|===
+// rate_ctr_group table NAT Access-List Statistics
+.nat:filter - NAT Access-List Statistics 
+[options="header"]
+|===
+| Name | Reference | Description
+| access-list:local-filter | <<nat:filter_access-list:local-filter>> | Rejected by rule for local
+| access-list:global-filter | <<nat:filter_access-list:global-filter>> | Rejected by rule for global
+|===
+// rate_ctr_group table NAT BSC Statistics
+.nat:bsc - NAT BSC Statistics 
+[options="header"]
+|===
+| Name | Reference | Description
+| sccp:conn | <<nat:bsc_sccp:conn>> | SCCP Connections         
+| sccp:calls | <<nat:bsc_sccp:calls>> | SCCP Assignment Commands 
+| net:reconnects | <<nat:bsc_net:reconnects>> | Network reconnects       
+| dropped:sccp | <<nat:bsc_dropped:sccp>> | Dropped SCCP connections.
+| dropped:calls | <<nat:bsc_dropped:calls>> | Dropped active calls.    
+| rejected:cr | <<nat:bsc_rejected:cr>> | Rejected CR due filter   
+| rejected:msg | <<nat:bsc_rejected:msg>> | Rejected MSG due filter  
+| rejected:ill | <<nat:bsc_rejected:ill>> | Rejected due parse error 
+| conn:lu | <<nat:bsc_conn:lu>> | Conn Location Update     
+| conn:rq | <<nat:bsc_conn:rq>> | Conn CM Service Req      
+| conn:pag | <<nat:bsc_conn:pag>> | Conn Paging Response     
+| conn:ssa | <<nat:bsc_conn:ssa>> | Conn USSD                
+| conn:other | <<nat:bsc_conn:other>> | Conn Other               
+|===
+// rate_ctr_group table NAT BSC Statistics
+.nat:bsc - NAT BSC Statistics 
+[options="header"]
+|===
+| Name | Reference | Description
+| sccp:conn | <<nat:bsc_sccp:conn>> | SCCP Connections         
+| sccp:calls | <<nat:bsc_sccp:calls>> | SCCP Assignment Commands 
+| net:reconnects | <<nat:bsc_net:reconnects>> | Network reconnects       
+| dropped:sccp | <<nat:bsc_dropped:sccp>> | Dropped SCCP connections.
+| dropped:calls | <<nat:bsc_dropped:calls>> | Dropped active calls.    
+| rejected:cr | <<nat:bsc_rejected:cr>> | Rejected CR due filter   
+| rejected:msg | <<nat:bsc_rejected:msg>> | Rejected MSG due filter  
+| rejected:ill | <<nat:bsc_rejected:ill>> | Rejected due parse error 
+| conn:lu | <<nat:bsc_conn:lu>> | Conn Location Update     
+| conn:rq | <<nat:bsc_conn:rq>> | Conn CM Service Req      
+| conn:pag | <<nat:bsc_conn:pag>> | Conn Paging Response     
+| conn:ssa | <<nat:bsc_conn:ssa>> | Conn USSD                
+| conn:other | <<nat:bsc_conn:other>> | Conn Other               
+|===
+// rate_ctr_group table NAT BSC Statistics
+.nat:bsc - NAT BSC Statistics 
+[options="header"]
+|===
+| Name | Reference | Description
+| sccp:conn | <<nat:bsc_sccp:conn>> | SCCP Connections         
+| sccp:calls | <<nat:bsc_sccp:calls>> | SCCP Assignment Commands 
+| net:reconnects | <<nat:bsc_net:reconnects>> | Network reconnects       
+| dropped:sccp | <<nat:bsc_dropped:sccp>> | Dropped SCCP connections.
+| dropped:calls | <<nat:bsc_dropped:calls>> | Dropped active calls.    
+| rejected:cr | <<nat:bsc_rejected:cr>> | Rejected CR due filter   
+| rejected:msg | <<nat:bsc_rejected:msg>> | Rejected MSG due filter  
+| rejected:ill | <<nat:bsc_rejected:ill>> | Rejected due parse error 
+| conn:lu | <<nat:bsc_conn:lu>> | Conn Location Update     
+| conn:rq | <<nat:bsc_conn:rq>> | Conn CM Service Req      
+| conn:pag | <<nat:bsc_conn:pag>> | Conn Paging Response     
+| conn:ssa | <<nat:bsc_conn:ssa>> | Conn USSD                
+| conn:other | <<nat:bsc_conn:other>> | Conn Other               
+|===
+== Osmo Stat Items
+
+// generating tables for osmo_stat_items
+== Osmo Counters
+
+// generating tables for osmo_counters
+// ungrouped osmo_counters
+.ungrouped osmo counters
+[options="header"]
+|===
+| Name | Reference | Description
+| nat.sccp.conn | <<ungroup_counter_nat.sccp.conn>> | 
+| nat.sccp.calls | <<ungroup_counter_nat.sccp.calls>> | 
+| nat.bsc.conn | <<ungroup_counter_nat.bsc.conn>> | 
+| nat.bsc.auth_fail | <<ungroup_counter_nat.bsc.auth_fail>> | 
+| nat.msc.conn | <<ungroup_counter_nat.msc.conn>> | 
+| nat.ussd.conn | <<ungroup_counter_nat.ussd.conn>> | 
+|===
diff --git a/manuals/OsmoBSCNAT/vty/nat_vty_reference.xml b/manuals/OsmoBSCNAT/vty/nat_vty_reference.xml
index 80fe08f..3ed4903 100644
--- a/manuals/OsmoBSCNAT/vty/nat_vty_reference.xml
+++ b/manuals/OsmoBSCNAT/vty/nat_vty_reference.xml
@@ -1,2061 +1,2289 @@
-<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
-  <node id='0'>
-  </node>
-  <node id='1'>
-    <command id='show version'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='version' doc='Displays program version' />
-      </params>
-    </command>
-    <command id='show online-help'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='online-help' doc='Online help' />
-      </params>
-    </command>
-    <command id='list'>
-      <params>
-        <param name='list' doc='Print command list' />
-      </params>
-    </command>
-    <command id='exit'>
-      <params>
-        <param name='exit' doc='Exit current mode and down to previous mode' />
-      </params>
-    </command>
-    <command id='help'>
-      <params>
-        <param name='help' doc='Description of the interactive help system' />
-      </params>
-    </command>
-    <command id='enable'>
-      <params>
-        <param name='enable' doc='Turn on privileged mode command' />
-      </params>
-    </command>
-    <command id='terminal length <0-512>'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='length' doc='Set number of lines on a screen' />
-        <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' />
-      </params>
-    </command>
-    <command id='terminal no length'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='length' doc='Set number of lines on a screen' />
-      </params>
-    </command>
-    <command id='echo .MESSAGE'>
-      <params>
-        <param name='echo' doc='Echo a message back to the vty' />
-        <param name='.MESSAGE' doc='The message to echo' />
-      </params>
-    </command>
-    <command id='who'>
-      <params>
-        <param name='who' doc='Display who is on vty' />
-      </params>
-    </command>
-    <command id='show history'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='history' doc='Display the session command history' />
-      </params>
-    </command>
-    <command id='logging enable'>
-      <params>
-        <param name='logging' doc='Configure log message to this terminal' />
-        <param name='enable' doc='Enables logging to this vty' />
-      </params>
-    </command>
-    <command id='logging disable'>
-      <params>
-        <param name='logging' doc='Configure log message to this terminal' />
-        <param name='disable' doc='Disables logging to this vty' />
-      </params>
-    </command>
-    <command id='logging filter all (0|1)'>
-      <params>
-        <param name='logging' doc='Configure log message to this terminal' />
-        <param name='filter' doc='Filter log messages' />
-        <param name='all' doc='Do you want to log all messages?' />
-        <param name='0' doc='Only print messages matched by other filters' />
-        <param name='1' doc='Bypass filter and print all messages' />
-      </params>
-    </command>
-    <command id='logging color (0|1)'>
-      <params>
-        <param name='logging' doc='Configure log message to this terminal' />
-        <param name='color' doc='Configure color-printing for log messages' />
-        <param name='0' doc='Don't use color for printing messages' />
-        <param name='1' doc='Use color for printing messages' />
-      </params>
-    </command>
-    <command id='logging timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure log message to this terminal' />
-        <param name='timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp' />
-      </params>
-    </command>
-    <command id='logging set-log-mask MASK'>
-      <params>
-        <param name='logging' doc='Configure log message to this terminal' />
-        <param name='set-log-mask' doc='Set the logmask of this logging target' />
-        <param name='MASK' doc='The logmask to use' />
-      </params>
-    </command>
-    <command id='logging set log mask MASK'>
-      <params>
-        <param name='logging' doc='Configure log message to this terminal' />
-        <param name='set' doc='Decide which categories to output.' />
-        <param name='log' doc='Log commands' />
-        <param name='mask' doc='Mask commands' />
-        <param name='MASK' doc='The logmask to use' />
-      </params>
-    </command>
-    <command id='logging level (all|rll|cc|mm|rr|rsl|nm|mncc|pag|meas|sccp|msc|mgcp|ho|db|ref|gprs|ns|bssgp|llc|sndcp|nat|ctrl|smpp|lglobal|llapd|linp|lmux|lmi|lmib|lsms) (everything|debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure log message to this terminal' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='all' doc='Global setting for all subsystems' />
-        <param name='rll' doc='A-bis Radio Link Layer (RLL)' />
-        <param name='cc' doc='Layer3 Call Control (CC)' />
-        <param name='mm' doc='Layer3 Mobility Management (MM)' />
-        <param name='rr' doc='Layer3 Radio Resource (RR)' />
-        <param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' />
-        <param name='nm' doc='A-bis Network Management / O&M (NM/OML)' />
-        <param name='mncc' doc='MNCC API for Call Control application' />
-        <param name='pag' doc='Paging Subsystem' />
-        <param name='meas' doc='Radio Measurement Processing' />
-        <param name='sccp' doc='SCCP Protocol' />
-        <param name='msc' doc='Mobile Switching Center' />
-        <param name='mgcp' doc='Media Gateway Control Protocol' />
-        <param name='ho' doc='Hand-Over' />
-        <param name='db' doc='Database Layer' />
-        <param name='ref' doc='Reference Counting' />
-        <param name='gprs' doc='GPRS Packet Service' />
-        <param name='ns' doc='GPRS Network Service (NS)' />
-        <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' />
-        <param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' />
-        <param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' />
-        <param name='nat' doc='GSM 08.08 NAT/Multiplexer' />
-        <param name='ctrl' doc='Control interface' />
-        <param name='smpp' doc='SMPP interface for external SMS apps' />
-        <param name='lglobal' doc='Library-internal global log family' />
-        <param name='llapd' doc='LAPD in libosmogsm' />
-        <param name='linp' doc='A-bis Intput Subsystem' />
-        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
-        <param name='lmi' doc='A-bis Input Driver for Signalling' />
-        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
-        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
-        <param name='everything' doc='Log simply everything' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='show logging vty'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='logging' doc='Show current logging configuration' />
-        <param name='vty' doc='Show current logging configuration for this vty' />
-      </params>
-    </command>
-    <command id='show alarms'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='alarms' doc='Show current logging configuration' />
-      </params>
-    </command>
-    <command id='show sccp connections'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='sccp' doc='Display information about SCCP' />
-        <param name='connections' doc='All active connections' />
-      </params>
-    </command>
-    <command id='show bsc connections'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='bsc' doc='Information about BSCs' />
-        <param name='connections' doc='All active connections' />
-      </params>
-    </command>
-    <command id='show bsc config'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='bsc' doc='Information about BSCs' />
-        <param name='config' doc='Configuration of BSCs' />
-      </params>
-    </command>
-    <command id='show statistics [NR]'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='statistics' doc='Display network statistics' />
-        <param name='[NR]' doc='Number of the BSC' />
-      </params>
-    </command>
-    <command id='show statistics-by-lac <0-65535>'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='statistics-by-lac' doc='Display network statistics by lac' />
-        <param name='<0-65535>' doc='The lac of the BSC' />
-      </params>
-    </command>
-    <command id='close bsc connection BSC_NR'>
-      <params>
-        <param name='close' doc='Close' />
-        <param name='bsc' doc='A-link' />
-        <param name='connection' doc='Connection' />
-        <param name='BSC_NR' doc='Identifier of the BSC' />
-      </params>
-    </command>
-    <command id='show msc connection'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='msc' doc='MSC related information' />
-        <param name='connection' doc='Status of the A-link connection' />
-      </params>
-    </command>
-    <command id='test regex PATTERN STRING'>
-      <params>
-        <param name='test' doc='Test utilities' />
-        <param name='regex' doc='Regexp testing' />
-        <param name='PATTERN' doc='The regexp pattern' />
-        <param name='STRING' doc='The string to match' />
-      </params>
-    </command>
-    <command id='show bsc mgcp NR'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='bsc' doc='Information about BSCs' />
-        <param name='mgcp' doc='MGCP related status' />
-        <param name='NR' doc='Identifier of the BSC' />
-      </params>
-    </command>
-    <command id='show access-list NAME'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='access-list' doc='IMSI access list' />
-        <param name='NAME' doc='Name of the access list' />
-      </params>
-    </command>
-    <command id='show imsi-black-list'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='imsi-black-list' doc='IMSIs barred from the network' />
-      </params>
-    </command>
-    <command id='show prefix-tree'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='prefix-tree' doc='Prefix tree for number rewriting' />
-      </params>
-    </command>
-    <command id='show ussd-connection'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='ussd-connection' doc='USSD connection related information' />
-      </params>
-    </command>
-    <command id='show mgcp [stats]'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='mgcp' doc='Display information about the MGCP Media Gateway' />
-        <param name='[stats]' doc='Include Statistics' />
-      </params>
-    </command>
-  </node>
-  <node id='2'>
-  </node>
-  <node id='3'>
-    <command id='help'>
-      <params>
-        <param name='help' doc='Description of the interactive help system' />
-      </params>
-    </command>
-    <command id='list'>
-      <params>
-        <param name='list' doc='Print command list' />
-      </params>
-    </command>
-    <command id='write terminal'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='terminal' doc='Write to terminal' />
-      </params>
-    </command>
-    <command id='write file'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='file' doc='Write to configuration file' />
-      </params>
-    </command>
-    <command id='write memory'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='memory' doc='Write configuration to the file (same as write file)' />
-      </params>
-    </command>
-    <command id='write'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-      </params>
-    </command>
-    <command id='show running-config'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='running-config' doc='running configuration' />
-      </params>
-    </command>
-    <command id='exit'>
-      <params>
-        <param name='exit' doc='Exit current mode and down to previous mode' />
-      </params>
-    </command>
-    <command id='disable'>
-      <params>
-        <param name='disable' doc='Turn off privileged mode command' />
-      </params>
-    </command>
-    <command id='configure terminal'>
-      <params>
-        <param name='configure' doc='Configuration from vty interface' />
-        <param name='terminal' doc='Configuration terminal' />
-      </params>
-    </command>
-    <command id='copy running-config startup-config'>
-      <params>
-        <param name='copy' doc='Copy configuration' />
-        <param name='running-config' doc='Copy running config to... ' />
-        <param name='startup-config' doc='Copy running config to startup config (same as write file)' />
-      </params>
-    </command>
-    <command id='show startup-config'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='startup-config' doc='Contentes of startup configuration' />
-      </params>
-    </command>
-    <command id='show version'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='version' doc='Displays program version' />
-      </params>
-    </command>
-    <command id='show online-help'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='online-help' doc='Online help' />
-      </params>
-    </command>
-    <command id='terminal length <0-512>'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='length' doc='Set number of lines on a screen' />
-        <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' />
-      </params>
-    </command>
-    <command id='terminal no length'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='length' doc='Set number of lines on a screen' />
-      </params>
-    </command>
-    <command id='echo .MESSAGE'>
-      <params>
-        <param name='echo' doc='Echo a message back to the vty' />
-        <param name='.MESSAGE' doc='The message to echo' />
-      </params>
-    </command>
-    <command id='who'>
-      <params>
-        <param name='who' doc='Display who is on vty' />
-      </params>
-    </command>
-    <command id='show history'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='history' doc='Display the session command history' />
-      </params>
-    </command>
-    <command id='terminal monitor'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='monitor' doc='Copy debug output to the current terminal line' />
-      </params>
-    </command>
-    <command id='terminal no monitor'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='monitor' doc='Copy debug output to the current terminal line' />
-      </params>
-    </command>
-    <command id='logging enable'>
-      <params>
-        <param name='logging' doc='Configure log message to this terminal' />
-        <param name='enable' doc='Enables logging to this vty' />
-      </params>
-    </command>
-    <command id='logging disable'>
-      <params>
-        <param name='logging' doc='Configure log message to this terminal' />
-        <param name='disable' doc='Disables logging to this vty' />
-      </params>
-    </command>
-    <command id='logging filter all (0|1)'>
-      <params>
-        <param name='logging' doc='Configure log message to this terminal' />
-        <param name='filter' doc='Filter log messages' />
-        <param name='all' doc='Do you want to log all messages?' />
-        <param name='0' doc='Only print messages matched by other filters' />
-        <param name='1' doc='Bypass filter and print all messages' />
-      </params>
-    </command>
-    <command id='logging color (0|1)'>
-      <params>
-        <param name='logging' doc='Configure log message to this terminal' />
-        <param name='color' doc='Configure color-printing for log messages' />
-        <param name='0' doc='Don't use color for printing messages' />
-        <param name='1' doc='Use color for printing messages' />
-      </params>
-    </command>
-    <command id='logging timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure log message to this terminal' />
-        <param name='timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp' />
-      </params>
-    </command>
-    <command id='logging set-log-mask MASK'>
-      <params>
-        <param name='logging' doc='Configure log message to this terminal' />
-        <param name='set-log-mask' doc='Set the logmask of this logging target' />
-        <param name='MASK' doc='The logmask to use' />
-      </params>
-    </command>
-    <command id='logging set log mask MASK'>
-      <params>
-        <param name='logging' doc='Configure log message to this terminal' />
-        <param name='set' doc='Decide which categories to output.' />
-        <param name='log' doc='Log commands' />
-        <param name='mask' doc='Mask commands' />
-        <param name='MASK' doc='The logmask to use' />
-      </params>
-    </command>
-    <command id='logging level (all|rll|cc|mm|rr|rsl|nm|mncc|pag|meas|sccp|msc|mgcp|ho|db|ref|gprs|ns|bssgp|llc|sndcp|nat|ctrl|smpp|lglobal|llapd|linp|lmux|lmi|lmib|lsms) (everything|debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure log message to this terminal' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='all' doc='Global setting for all subsystems' />
-        <param name='rll' doc='A-bis Radio Link Layer (RLL)' />
-        <param name='cc' doc='Layer3 Call Control (CC)' />
-        <param name='mm' doc='Layer3 Mobility Management (MM)' />
-        <param name='rr' doc='Layer3 Radio Resource (RR)' />
-        <param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' />
-        <param name='nm' doc='A-bis Network Management / O&M (NM/OML)' />
-        <param name='mncc' doc='MNCC API for Call Control application' />
-        <param name='pag' doc='Paging Subsystem' />
-        <param name='meas' doc='Radio Measurement Processing' />
-        <param name='sccp' doc='SCCP Protocol' />
-        <param name='msc' doc='Mobile Switching Center' />
-        <param name='mgcp' doc='Media Gateway Control Protocol' />
-        <param name='ho' doc='Hand-Over' />
-        <param name='db' doc='Database Layer' />
-        <param name='ref' doc='Reference Counting' />
-        <param name='gprs' doc='GPRS Packet Service' />
-        <param name='ns' doc='GPRS Network Service (NS)' />
-        <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' />
-        <param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' />
-        <param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' />
-        <param name='nat' doc='GSM 08.08 NAT/Multiplexer' />
-        <param name='ctrl' doc='Control interface' />
-        <param name='smpp' doc='SMPP interface for external SMS apps' />
-        <param name='lglobal' doc='Library-internal global log family' />
-        <param name='llapd' doc='LAPD in libosmogsm' />
-        <param name='linp' doc='A-bis Intput Subsystem' />
-        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
-        <param name='lmi' doc='A-bis Input Driver for Signalling' />
-        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
-        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
-        <param name='everything' doc='Log simply everything' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='show logging vty'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='logging' doc='Show current logging configuration' />
-        <param name='vty' doc='Show current logging configuration for this vty' />
-      </params>
-    </command>
-    <command id='show alarms'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='alarms' doc='Show current logging configuration' />
-      </params>
-    </command>
-    <command id='show sccp connections'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='sccp' doc='Display information about SCCP' />
-        <param name='connections' doc='All active connections' />
-      </params>
-    </command>
-    <command id='show bsc connections'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='bsc' doc='Information about BSCs' />
-        <param name='connections' doc='All active connections' />
-      </params>
-    </command>
-    <command id='show bsc config'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='bsc' doc='Information about BSCs' />
-        <param name='config' doc='Configuration of BSCs' />
-      </params>
-    </command>
-    <command id='show statistics [NR]'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='statistics' doc='Display network statistics' />
-        <param name='[NR]' doc='Number of the BSC' />
-      </params>
-    </command>
-    <command id='show statistics-by-lac <0-65535>'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='statistics-by-lac' doc='Display network statistics by lac' />
-        <param name='<0-65535>' doc='The lac of the BSC' />
-      </params>
-    </command>
-    <command id='close bsc connection BSC_NR'>
-      <params>
-        <param name='close' doc='Close' />
-        <param name='bsc' doc='A-link' />
-        <param name='connection' doc='Connection' />
-        <param name='BSC_NR' doc='Identifier of the BSC' />
-      </params>
-    </command>
-    <command id='show msc connection'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='msc' doc='MSC related information' />
-        <param name='connection' doc='Status of the A-link connection' />
-      </params>
-    </command>
-    <command id='test regex PATTERN STRING'>
-      <params>
-        <param name='test' doc='Test utilities' />
-        <param name='regex' doc='Regexp testing' />
-        <param name='PATTERN' doc='The regexp pattern' />
-        <param name='STRING' doc='The string to match' />
-      </params>
-    </command>
-    <command id='show bsc mgcp NR'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='bsc' doc='Information about BSCs' />
-        <param name='mgcp' doc='MGCP related status' />
-        <param name='NR' doc='Identifier of the BSC' />
-      </params>
-    </command>
-    <command id='show access-list NAME'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='access-list' doc='IMSI access list' />
-        <param name='NAME' doc='Name of the access list' />
-      </params>
-    </command>
-    <command id='show imsi-black-list'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='imsi-black-list' doc='IMSIs barred from the network' />
-      </params>
-    </command>
-    <command id='show prefix-tree'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='prefix-tree' doc='Prefix tree for number rewriting' />
-      </params>
-    </command>
-    <command id='show ussd-connection'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='ussd-connection' doc='USSD connection related information' />
-      </params>
-    </command>
-    <command id='set bsc last-used-endpoint <0-9999999999> <0-1024>'>
-      <params>
-        <param name='set' doc='Set a value' />
-        <param name='bsc' doc='Operate on a BSC' />
-        <param name='last-used-endpoint' doc='Last used endpoint for an assignment' />
-        <param name='<0-9999999999>' doc='BSC configuration number' />
-        <param name='<0-1024>' doc='Endpoint number used' />
-      </params>
-    </command>
-    <command id='nat-block (block|unblock)'>
-      <params>
-        <param name='nat-block' doc='Block the NAT for new connections' />
-        <param name='block' doc='Block' />
-        <param name='unblock' doc='Unblock' />
-      </params>
-    </command>
-    <command id='show mgcp [stats]'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='mgcp' doc='Display information about the MGCP Media Gateway' />
-        <param name='[stats]' doc='Include Statistics' />
-      </params>
-    </command>
-    <command id='loop-endpoint <0-64> NAME (0|1)'>
-      <params>
-        <param name='loop-endpoint' doc='Loop a given endpoint' />
-        <param name='<0-64>' doc='Trunk number' />
-        <param name='NAME' doc='The name in hex of the endpoint' />
-        <param name='0' doc='Disable the loop' />
-        <param name='1' doc='Enable the loop' />
-      </params>
-    </command>
-    <command id='tap-call <0-64> ENDPOINT (bts-in|bts-out|net-in|net-out) A.B.C.D <0-65534>'>
-      <params>
-        <param name='tap-call' doc='Forward data on endpoint to a different system' />
-        <param name='<0-64>' doc='Trunk number' />
-        <param name='ENDPOINT' doc='The endpoint in hex' />
-        <param name='bts-in' doc='Forward the data coming from the bts' />
-        <param name='bts-out' doc='Forward the data coming from the bts leaving to the network' />
-        <param name='net-in' doc='Forward the data coming from the net' />
-        <param name='net-out' doc='Forward the data coming from the net leaving to the bts' />
-        <param name='A.B.C.D' doc='destination IP of the data' />
-        <param name='<0-65534>' doc='destination port' />
-      </params>
-    </command>
-    <command id='free-endpoint <0-64> NUMBER'>
-      <params>
-        <param name='free-endpoint' doc='Free the given endpoint' />
-        <param name='<0-64>' doc='Trunk number' />
-        <param name='NUMBER' doc='Endpoint number in hex.' />
-      </params>
-    </command>
-    <command id='reset-endpoint <0-64> NUMBER'>
-      <params>
-        <param name='reset-endpoint' doc='Reset the given endpoint' />
-        <param name='<0-64>' doc='Trunk number' />
-        <param name='NUMBER' doc='Endpoint number in hex.' />
-      </params>
-    </command>
-    <command id='reset-all-endpoints'>
-      <params>
-        <param name='reset-all-endpoints' doc='Reset all endpoints' />
-      </params>
-    </command>
-  </node>
-  <node id='4'>
-    <command id='help'>
-      <params>
-        <param name='help' doc='Description of the interactive help system' />
-      </params>
-    </command>
-    <command id='list'>
-      <params>
-        <param name='list' doc='Print command list' />
-      </params>
-    </command>
-    <command id='write terminal'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='terminal' doc='Write to terminal' />
-      </params>
-    </command>
-    <command id='write file'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='file' doc='Write to configuration file' />
-      </params>
-    </command>
-    <command id='write memory'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='memory' doc='Write configuration to the file (same as write file)' />
-      </params>
-    </command>
-    <command id='write'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-      </params>
-    </command>
-    <command id='show running-config'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='running-config' doc='running configuration' />
-      </params>
-    </command>
-    <command id='exit'>
-      <params>
-        <param name='exit' doc='Exit current mode and down to previous mode' />
-      </params>
-    </command>
-    <command id='end'>
-      <params>
-        <param name='end' doc='End current mode and change to enable mode.' />
-      </params>
-    </command>
-    <command id='hostname WORD'>
-      <params>
-        <param name='hostname' doc='Set system's network name' />
-        <param name='WORD' doc='This system's network name' />
-      </params>
-    </command>
-    <command id='no hostname [HOSTNAME]'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='hostname' doc='Reset system's network name' />
-        <param name='[HOSTNAME]' doc='Host name of this router' />
-      </params>
-    </command>
-    <command id='password (8|) WORD'>
-      <params>
-        <param name='password' doc='Assign the terminal connection password' />
-        <param name='8' doc='Specifies a HIDDEN password will follow' />
-        <param name='' doc='dummy string ' />
-        <param name='WORD' doc='The HIDDEN line password string' />
-      </params>
-    </command>
-    <command id='password LINE'>
-      <params>
-        <param name='password' doc='Assign the terminal connection password' />
-        <param name='LINE' doc='The UNENCRYPTED (cleartext) line password' />
-      </params>
-    </command>
-    <command id='enable password (8|) WORD'>
-      <params>
-        <param name='enable' doc='Modify enable password parameters' />
-        <param name='password' doc='Assign the privileged level password' />
-        <param name='8' doc='Specifies a HIDDEN password will follow' />
-        <param name='' doc='dummy string ' />
-        <param name='WORD' doc='The HIDDEN 'enable' password string' />
-      </params>
-    </command>
-    <command id='enable password LINE'>
-      <params>
-        <param name='enable' doc='Modify enable password parameters' />
-        <param name='password' doc='Assign the privileged level password' />
-        <param name='LINE' doc='The UNENCRYPTED (cleartext) 'enable' password' />
-      </params>
-    </command>
-    <command id='no enable password'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='enable' doc='Modify enable password parameters' />
-        <param name='password' doc='Assign the privileged level password' />
-      </params>
-    </command>
-    <command id='banner motd default'>
-      <params>
-        <param name='banner' doc='Set banner string' />
-        <param name='motd' doc='Strings for motd' />
-        <param name='default' doc='Default string' />
-      </params>
-    </command>
-    <command id='banner motd file [FILE]'>
-      <params>
-        <param name='banner' doc='Set banner' />
-        <param name='motd' doc='Banner for motd' />
-        <param name='file' doc='Banner from a file' />
-        <param name='[FILE]' doc='Filename' />
-      </params>
-    </command>
-    <command id='no banner motd'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='banner' doc='Set banner string' />
-        <param name='motd' doc='Strings for motd' />
-      </params>
-    </command>
-    <command id='service terminal-length <0-512>'>
-      <params>
-        <param name='service' doc='Set up miscellaneous service' />
-        <param name='terminal-length' doc='System wide terminal length configuration' />
-        <param name='<0-512>' doc='Number of lines of VTY (0 means no line control)' />
-      </params>
-    </command>
-    <command id='no service terminal-length [<0-512>]'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='service' doc='Set up miscellaneous service' />
-        <param name='terminal-length' doc='System wide terminal length configuration' />
-        <param name='[<0-512>]' doc='Number of lines of VTY (0 means no line control)' />
-      </params>
-    </command>
-    <command id='line vty'>
-      <params>
-        <param name='line' doc='Configure a terminal line' />
-        <param name='vty' doc='Virtual terminal' />
-      </params>
-    </command>
-    <command id='service advanced-vty'>
-      <params>
-        <param name='service' doc='Set up miscellaneous service' />
-        <param name='advanced-vty' doc='Enable advanced mode vty interface' />
-      </params>
-    </command>
-    <command id='no service advanced-vty'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='service' doc='Set up miscellaneous service' />
-        <param name='advanced-vty' doc='Enable advanced mode vty interface' />
-      </params>
-    </command>
-    <command id='show history'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='history' doc='Display the session command history' />
-      </params>
-    </command>
-    <command id='log stderr'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='stderr' doc='Logging via STDERR of the process' />
-      </params>
-    </command>
-    <command id='no log stderr'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='stderr' doc='Logging via STDERR of the process' />
-      </params>
-    </command>
-    <command id='log file .FILENAME'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='file' doc='Logging to text file' />
-        <param name='.FILENAME' doc='Filename' />
-      </params>
-    </command>
-    <command id='no log file .FILENAME'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='file' doc='Logging to text file' />
-        <param name='.FILENAME' doc='Filename' />
-      </params>
-    </command>
-    <command id='log alarms <2-32700>'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='alarms' doc='Logging alarms to osmo_strrb' />
-        <param name='<2-32700>' doc='Maximum number of messages to log' />
-      </params>
-    </command>
-    <command id='no log alarms'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='alarms' doc='Logging alarms to osmo_strrb' />
-      </params>
-    </command>
-    <command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='syslog' doc='Logging via syslog' />
-        <param name='authpriv' doc='Security/authorization messages facility' />
-        <param name='cron' doc='Clock daemon (cron/at) facility' />
-        <param name='daemon' doc='General system daemon facility' />
-        <param name='ftp' doc='Ftp daemon facility' />
-        <param name='lpr' doc='Line printer facility' />
-        <param name='mail' doc='Mail facility' />
-        <param name='news' doc='News facility' />
-        <param name='user' doc='Generic facility' />
-        <param name='uucp' doc='UUCP facility' />
-      </params>
-    </command>
-    <command id='log syslog local <0-7>'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='syslog' doc='Logging via syslog' />
-        <param name='local' doc='Syslog LOCAL facility' />
-        <param name='<0-7>' doc='Local facility number' />
-      </params>
-    </command>
-    <command id='no log syslog'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='syslog' doc='Logging via syslog' />
-      </params>
-    </command>
-    <command id='nat'>
-      <params>
-        <param name='nat' doc='Configure the NAT' />
-      </params>
-    </command>
-    <command id='mgcp'>
-      <params>
-        <param name='mgcp' doc='Configure the MGCP' />
-      </params>
-    </command>
-  </node>
-  <node id='7'>
-    <command id='help'>
-      <params>
-        <param name='help' doc='Description of the interactive help system' />
-      </params>
-    </command>
-    <command id='list'>
-      <params>
-        <param name='list' doc='Print command list' />
-      </params>
-    </command>
-    <command id='write terminal'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='terminal' doc='Write to terminal' />
-      </params>
-    </command>
-    <command id='write file'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='file' doc='Write to configuration file' />
-      </params>
-    </command>
-    <command id='write memory'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='memory' doc='Write configuration to the file (same as write file)' />
-      </params>
-    </command>
-    <command id='write'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-      </params>
-    </command>
-    <command id='show running-config'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='running-config' doc='running configuration' />
-      </params>
-    </command>
-    <command id='exit'>
-      <params>
-        <param name='exit' doc='Exit current mode and down to previous mode' />
-      </params>
-    </command>
-    <command id='end'>
-      <params>
-        <param name='end' doc='End current mode and change to enable mode.' />
-      </params>
-    </command>
-    <command id='logging filter all (0|1)'>
-      <params>
-        <param name='logging' doc='Configure log message to this terminal' />
-        <param name='filter' doc='Filter log messages' />
-        <param name='all' doc='Do you want to log all messages?' />
-        <param name='0' doc='Only print messages matched by other filters' />
-        <param name='1' doc='Bypass filter and print all messages' />
-      </params>
-    </command>
-    <command id='logging color (0|1)'>
-      <params>
-        <param name='logging' doc='Configure log message to this terminal' />
-        <param name='color' doc='Configure color-printing for log messages' />
-        <param name='0' doc='Don't use color for printing messages' />
-        <param name='1' doc='Use color for printing messages' />
-      </params>
-    </command>
-    <command id='logging timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure log message to this terminal' />
-        <param name='timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp' />
-      </params>
-    </command>
-    <command id='logging level (all|rll|cc|mm|rr|rsl|nm|mncc|pag|meas|sccp|msc|mgcp|ho|db|ref|gprs|ns|bssgp|llc|sndcp|nat|ctrl|smpp|lglobal|llapd|linp|lmux|lmi|lmib|lsms) (everything|debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure log message to this terminal' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='all' doc='Global setting for all subsystems' />
-        <param name='rll' doc='A-bis Radio Link Layer (RLL)' />
-        <param name='cc' doc='Layer3 Call Control (CC)' />
-        <param name='mm' doc='Layer3 Mobility Management (MM)' />
-        <param name='rr' doc='Layer3 Radio Resource (RR)' />
-        <param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' />
-        <param name='nm' doc='A-bis Network Management / O&M (NM/OML)' />
-        <param name='mncc' doc='MNCC API for Call Control application' />
-        <param name='pag' doc='Paging Subsystem' />
-        <param name='meas' doc='Radio Measurement Processing' />
-        <param name='sccp' doc='SCCP Protocol' />
-        <param name='msc' doc='Mobile Switching Center' />
-        <param name='mgcp' doc='Media Gateway Control Protocol' />
-        <param name='ho' doc='Hand-Over' />
-        <param name='db' doc='Database Layer' />
-        <param name='ref' doc='Reference Counting' />
-        <param name='gprs' doc='GPRS Packet Service' />
-        <param name='ns' doc='GPRS Network Service (NS)' />
-        <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' />
-        <param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' />
-        <param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' />
-        <param name='nat' doc='GSM 08.08 NAT/Multiplexer' />
-        <param name='ctrl' doc='Control interface' />
-        <param name='smpp' doc='SMPP interface for external SMS apps' />
-        <param name='lglobal' doc='Library-internal global log family' />
-        <param name='llapd' doc='LAPD in libosmogsm' />
-        <param name='linp' doc='A-bis Intput Subsystem' />
-        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
-        <param name='lmi' doc='A-bis Input Driver for Signalling' />
-        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
-        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
-        <param name='everything' doc='Log simply everything' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-  </node>
-  <node id='8'>
-    <command id='help'>
-      <params>
-        <param name='help' doc='Description of the interactive help system' />
-      </params>
-    </command>
-    <command id='list'>
-      <params>
-        <param name='list' doc='Print command list' />
-      </params>
-    </command>
-    <command id='write terminal'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='terminal' doc='Write to terminal' />
-      </params>
-    </command>
-    <command id='write file'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='file' doc='Write to configuration file' />
-      </params>
-    </command>
-    <command id='write memory'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='memory' doc='Write configuration to the file (same as write file)' />
-      </params>
-    </command>
-    <command id='write'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-      </params>
-    </command>
-    <command id='show running-config'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='running-config' doc='running configuration' />
-      </params>
-    </command>
-    <command id='exit'>
-      <params>
-        <param name='exit' doc='Exit current mode and down to previous mode' />
-      </params>
-    </command>
-    <command id='end'>
-      <params>
-        <param name='end' doc='End current mode and change to enable mode.' />
-      </params>
-    </command>
-    <command id='login'>
-      <params>
-        <param name='login' doc='Enable password checking' />
-      </params>
-    </command>
-    <command id='no login'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='login' doc='Enable password checking' />
-      </params>
-    </command>
-  </node>
-  <node id='19'>
-    <command id='help'>
-      <params>
-        <param name='help' doc='Description of the interactive help system' />
-      </params>
-    </command>
-    <command id='list'>
-      <params>
-        <param name='list' doc='Print command list' />
-      </params>
-    </command>
-    <command id='write terminal'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='terminal' doc='Write to terminal' />
-      </params>
-    </command>
-    <command id='write file'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='file' doc='Write to configuration file' />
-      </params>
-    </command>
-    <command id='write memory'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='memory' doc='Write configuration to the file (same as write file)' />
-      </params>
-    </command>
-    <command id='write'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-      </params>
-    </command>
-    <command id='show running-config'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='running-config' doc='running configuration' />
-      </params>
-    </command>
-    <command id='exit'>
-      <params>
-        <param name='exit' doc='Exit current mode and down to previous mode' />
-      </params>
-    </command>
-    <command id='end'>
-      <params>
-        <param name='end' doc='End current mode and change to enable mode.' />
-      </params>
-    </command>
-    <command id='local ip A.B.C.D'>
-      <params>
-        <param name='local' doc='Local options for the SDP record' />
-        <param name='ip' doc='IP information' />
-        <param name='A.B.C.D' doc='IPv4 Address to use in SDP record' />
-      </params>
-    </command>
-    <command id='bts ip A.B.C.D'>
-      <params>
-        <param name='bts' doc='BTS Audio source/destination options' />
-        <param name='ip' doc='IP information' />
-        <param name='A.B.C.D' doc='IPv4 Address of the BTS' />
-      </params>
-    </command>
-    <command id='bind ip A.B.C.D'>
-      <params>
-        <param name='bind' doc='Listen/Bind related socket option' />
-        <param name='ip' doc='IP information' />
-        <param name='A.B.C.D' doc='IPv4 Address to bind to' />
-      </params>
-    </command>
-    <command id='bind port <0-65534>'>
-      <params>
-        <param name='bind' doc='Listen/Bind related socket option' />
-        <param name='port' doc='Port information' />
-        <param name='<0-65534>' doc='UDP port to listen for MGCP messages' />
-      </params>
-    </command>
-    <command id='bind early (0|1)'>
-      <params>
-        <param name='bind' doc='Listen/Bind related socket option' />
-        <param name='early' doc='Bind local ports on start up' />
-        <param name='0' doc='Bind on demand' />
-        <param name='1' doc='Bind on startup' />
-      </params>
-    </command>
-    <command id='rtp base <0-65534>'>
-      <params>
-        <param name='rtp' doc='RTP configuration' />
-        <param name='base' doc='First UDP port allocated for the BTS side' />
-        <param name='<0-65534>' doc='UDP Port number' />
-      </params>
-    </command>
-    <command id='rtp bts-base <0-65534>'>
-      <params>
-        <param name='rtp' doc='RTP configuration' />
-        <param name='bts-base' doc='First UDP port allocated for the BTS side' />
-        <param name='<0-65534>' doc='UDP Port number' />
-      </params>
-    </command>
-    <command id='rtp net-base <0-65534>'>
-      <params>
-        <param name='rtp' doc='RTP configuration' />
-        <param name='net-base' doc='First UDP port allocated for the NET side' />
-        <param name='<0-65534>' doc='UDP Port number' />
-      </params>
-    </command>
-    <command id='rtp bts-range <0-65534> <0-65534>'>
-      <params>
-        <param name='rtp' doc='RTP configuration' />
-        <param name='bts-range' doc='Range of ports to use for the BTS side' />
-        <param name='<0-65534>' doc='Start of the range of ports' />
-        <param name='<0-65534>' doc='End of the range of ports' />
-      </params>
-    </command>
-    <command id='rtp net-range <0-65534> <0-65534>'>
-      <params>
-        <param name='rtp' doc='RTP configuration' />
-        <param name='net-range' doc='Range of ports to use for the NET side' />
-        <param name='<0-65534>' doc='Start of the range of ports' />
-        <param name='<0-65534>' doc='End of the range of ports' />
-      </params>
-    </command>
-    <command id='rtp transcoder-range <0-65534> <0-65534>'>
-      <params>
-        <param name='rtp' doc='RTP configuration' />
-        <param name='transcoder-range' doc='Range of ports to use for the Transcoder' />
-        <param name='<0-65534>' doc='Start of the range of ports' />
-        <param name='<0-65534>' doc='End of the range of ports' />
-      </params>
-    </command>
-    <command id='rtp transcoder-base <0-65534>'>
-      <params>
-        <param name='rtp' doc='RTP configuration' />
-        <param name='transcoder-base' doc='First UDP port allocated for the Transcoder side' />
-        <param name='<0-65534>' doc='UDP Port number' />
-      </params>
-    </command>
-    <command id='rtp ip-dscp <0-255>'>
-      <params>
-        <param name='rtp' doc='RTP configuration' />
-        <param name='ip-dscp' doc='Apply IP_TOS to the audio stream' />
-        <param name='<0-255>' doc='The DSCP value' />
-      </params>
-    </command>
-    <command id='rtp ip-tos <0-255>'>
-      <params>
-        <param name='rtp' doc='RTP configuration' />
-        <param name='ip-tos' doc='Apply IP_TOS to the audio stream' />
-        <param name='<0-255>' doc='The DSCP value' />
-      </params>
-    </command>
-    <command id='rtp keep-alive <1-120>'>
-      <params>
-        <param name='rtp' doc='RTP configuration' />
-        <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' />
-        <param name='<1-120>' doc='Keep alive interval in secs' />
-      </params>
-    </command>
-    <command id='rtp keep-alive once'>
-      <params>
-        <param name='rtp' doc='RTP configuration' />
-        <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' />
-        <param name='once' doc='Send dummy packet only once after CRCX/MDCX' />
-      </params>
-    </command>
-    <command id='no rtp keep-alive'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='rtp' doc='RTP configuration' />
-        <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' />
-      </params>
-    </command>
-    <command id='call-agent ip A.B.C.D'>
-      <params>
-        <param name='call-agent' doc='Callagent information' />
-        <param name='ip' doc='IP information' />
-        <param name='A.B.C.D' doc='IPv4 Address of the callagent' />
-      </params>
-    </command>
-    <command id='call agent ip A.B.C.D'>
-      <params>
-        <param name='call' doc='Callagent information' />
-        <param name='agent' doc='Callagent information' />
-        <param name='ip' doc='IP information' />
-        <param name='A.B.C.D' doc='IPv4 Address of the callagent' />
-      </params>
-    </command>
-    <command id='transcoder-mgw A.B.C.D'>
-      <params>
-        <param name='transcoder-mgw' doc='Use a MGW to detranscoder RTP' />
-        <param name='A.B.C.D' doc='The IP address of the MGW' />
-      </params>
-    </command>
-    <command id='no transcoder-mgw'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='transcoder-mgw' doc='Disable the transcoding' />
-      </params>
-    </command>
-    <command id='transcoder-remote-base <0-65534>'>
-      <params>
-        <param name='transcoder-remote-base' doc='Set the base port for the transcoder' />
-        <param name='<0-65534>' doc='The RTP base port on the transcoder' />
-      </params>
-    </command>
-    <command id='sdp audio-payload number <1-255>'>
-      <params>
-        <param name='sdp' doc='SDP File related options' />
-        <param name='audio-payload' doc='Audio payload options' />
-        <param name='number' doc='Number' />
-        <param name='<1-255>' doc='Payload number' />
-      </params>
-    </command>
-    <command id='sdp audio-payload name NAME'>
-      <params>
-        <param name='sdp' doc='SDP File related options' />
-        <param name='audio-payload' doc='Audio payload options' />
-        <param name='name' doc='Name' />
-        <param name='NAME' doc='Payload name' />
-      </params>
-    </command>
-    <command id='sdp audio payload number <1-255>'>
-      <params>
-        <param name='sdp' doc='SDP File related options' />
-        <param name='audio' doc='Audio payload options' />
-        <param name='payload' doc='Audio payload options' />
-        <param name='number' doc='Number' />
-        <param name='<1-255>' doc='Payload number' />
-      </params>
-    </command>
-    <command id='sdp audio payload name NAME'>
-      <params>
-        <param name='sdp' doc='SDP File related options' />
-        <param name='audio' doc='Audio payload options' />
-        <param name='payload' doc='Audio payload options' />
-        <param name='name' doc='Name' />
-        <param name='NAME' doc='Payload name' />
-      </params>
-    </command>
-    <command id='loop (0|1)'>
-      <params>
-        <param name='loop' doc='Loop audio for all endpoints on main trunk' />
-        <param name='0' doc='Don't Loop' />
-        <param name='1' doc='Loop' />
-      </params>
-    </command>
-    <command id='number endpoints <0-65534>'>
-      <params>
-        <param name='number' doc='Number options' />
-        <param name='endpoints' doc='Endpoints available' />
-        <param name='<0-65534>' doc='Number endpoints' />
-      </params>
-    </command>
-    <command id='rtcp-omit'>
-      <params>
-        <param name='rtcp-omit' doc='Drop RTCP packets in both directions' />
-      </params>
-    </command>
-    <command id='no rtcp-omit'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='rtcp-omit' doc='Drop RTCP packets in both directions' />
-      </params>
-    </command>
-    <command id='rtp-patch ssrc'>
-      <params>
-        <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
-        <param name='ssrc' doc='Force a fixed SSRC' />
-      </params>
-    </command>
-    <command id='no rtp-patch ssrc'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
-        <param name='ssrc' doc='Force a fixed SSRC' />
-      </params>
-    </command>
-    <command id='rtp-patch timestamp'>
-      <params>
-        <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
-        <param name='timestamp' doc='Adjust RTP timestamp' />
-      </params>
-    </command>
-    <command id='no rtp-patch timestamp'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
-        <param name='timestamp' doc='Adjust RTP timestamp' />
-      </params>
-    </command>
-    <command id='no rtp-patch'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
-      </params>
-    </command>
-    <command id='sdp audio fmtp-extra .NAME'>
-      <params>
-        <param name='sdp' doc='Add extra fmtp for the SDP file' />
-        <param name='audio' doc='Audio' />
-        <param name='fmtp-extra' doc='Fmtp-extra' />
-        <param name='.NAME' doc='Extra Information' />
-      </params>
-    </command>
-    <command id='sdp audio-payload send-ptime'>
-      <params>
-        <param name='sdp' doc='SDP File related options' />
-        <param name='audio-payload' doc='Audio payload options' />
-        <param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' />
-      </params>
-    </command>
-    <command id='no sdp audio-payload send-ptime'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='sdp' doc='SDP File related options' />
-        <param name='audio-payload' doc='Audio payload options' />
-        <param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' />
-      </params>
-    </command>
-    <command id='trunk <1-64>'>
-      <params>
-        <param name='trunk' doc='Configure a SS7 trunk' />
-        <param name='<1-64>' doc='Trunk Nr' />
-      </params>
-    </command>
-  </node>
-  <node id='23'>
-    <command id='help'>
-      <params>
-        <param name='help' doc='Description of the interactive help system' />
-      </params>
-    </command>
-    <command id='list'>
-      <params>
-        <param name='list' doc='Print command list' />
-      </params>
-    </command>
-    <command id='write terminal'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='terminal' doc='Write to terminal' />
-      </params>
-    </command>
-    <command id='write file'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='file' doc='Write to configuration file' />
-      </params>
-    </command>
-    <command id='write memory'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='memory' doc='Write configuration to the file (same as write file)' />
-      </params>
-    </command>
-    <command id='write'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-      </params>
-    </command>
-    <command id='show running-config'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='running-config' doc='running configuration' />
-      </params>
-    </command>
-    <command id='exit'>
-      <params>
-        <param name='exit' doc='Exit current mode and down to previous mode' />
-      </params>
-    </command>
-    <command id='end'>
-      <params>
-        <param name='end' doc='End current mode and change to enable mode.' />
-      </params>
-    </command>
-    <command id='msc ip A.B.C.D'>
-      <params>
-        <param name='msc' doc='MSC related configuration' />
-        <param name='ip' doc='Configure the IP address' />
-        <param name='A.B.C.D' doc='IP information' />
-      </params>
-    </command>
-    <command id='msc port <1-65500>'>
-      <params>
-        <param name='msc' doc='MSC related configuration' />
-        <param name='port' doc='Configure the port' />
-        <param name='<1-65500>' doc='Port number' />
-      </params>
-    </command>
-    <command id='timeout auth <1-256>'>
-      <params>
-        <param name='timeout' doc='Timeout configuration' />
-        <param name='auth' doc='Authentication timeout' />
-        <param name='<1-256>' doc='Timeout in seconds' />
-      </params>
-    </command>
-    <command id='timeout ping NR'>
-      <params>
-        <param name='timeout' doc='Timeout configuration' />
-        <param name='ping' doc='Time between two pings' />
-        <param name='NR' doc='Timeout in seconds' />
-      </params>
-    </command>
-    <command id='timeout pong NR'>
-      <params>
-        <param name='timeout' doc='Timeout configuration' />
-        <param name='pong' doc='Waiting for pong timeout' />
-        <param name='NR' doc='Timeout in seconds' />
-      </params>
-    </command>
-    <command id='token TOKEN'>
-      <params>
-        <param name='token' doc='Authentication token configuration' />
-        <param name='TOKEN' doc='Token of the BSC, currently transferred in cleartext' />
-      </params>
-    </command>
-    <command id='ip-dscp <0-255>'>
-      <params>
-        <param name='ip-dscp' doc='Set the IP DSCP for the BSCs to use' />
-        <param name='<0-255>' doc='Set the IP_TOS attribute' />
-      </params>
-    </command>
-    <command id='ip-tos <0-255>'>
-      <params>
-        <param name='ip-tos' doc='Use ip-dscp in the future.' />
-        <param name='<0-255>' doc='Set the DSCP' />
-      </params>
-    </command>
-    <command id='access-list-name NAME'>
-      <params>
-        <param name='access-list-name' doc='Set the name of the access list to use.' />
-        <param name='NAME' doc='The name of the to be used access list.' />
-      </params>
-    </command>
-    <command id='no access-list-name'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='access-list-name' doc='Remove the access list from the NAT.' />
-      </params>
-    </command>
-    <command id='imsi-black-list-file-name NAME'>
-      <params>
-        <param name='imsi-black-list-file-name' doc='IMSI black listing' />
-        <param name='NAME' doc='Filename IMSI and reject-cause' />
-      </params>
-    </command>
-    <command id='no imsi-black-list-file-name'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='imsi-black-list-file-name' doc='Remove the imsi-black-list' />
-      </params>
-    </command>
-    <command id='ussd-list-name NAME'>
-      <params>
-        <param name='ussd-list-name' doc='Set the name of the access list to check for IMSIs for USSD message' />
-        <param name='NAME' doc='The name of the access list for HLR USSD handling' />
-      </params>
-    </command>
-    <command id='ussd-query REGEXP'>
-      <params>
-        <param name='ussd-query' doc='Set the USSD query to match with the ussd-list-name' />
-        <param name='REGEXP' doc='The query to match' />
-      </params>
-    </command>
-    <command id='ussd-token TOKEN'>
-      <params>
-        <param name='ussd-token' doc='Set the token used to identify the USSD module' />
-        <param name='TOKEN' doc='Secret key' />
-      </params>
-    </command>
-    <command id='ussd-local-ip A.B.C.D'>
-      <params>
-        <param name='ussd-local-ip' doc='Set the IP to listen for the USSD Provider' />
-        <param name='A.B.C.D' doc='IP Address' />
-      </params>
-    </command>
-    <command id='use-msc-ipa-for-mgcp'>
-      <params>
-        <param name='use-msc-ipa-for-mgcp' doc='This needs to be set at start. Handle MGCP messages through the IPA protocol and not through the UDP socket.' />
-      </params>
-    </command>
-    <command id='access-list NAME imsi-allow [REGEXP]'>
-      <params>
-        <param name='access-list' doc='Access list commands' />
-        <param name='NAME' doc='Name of the access list' />
-        <param name='imsi-allow' doc='Add allowed IMSI to the list' />
-        <param name='[REGEXP]' doc='Regexp for IMSIs' />
-      </params>
-    </command>
-    <command id='access-list NAME imsi-deny [REGEXP] (<0-256>) (<0-256>)'>
-      <params>
-        <param name='access-list' doc='Access list commands' />
-        <param name='NAME' doc='Name of the access list' />
-        <param name='imsi-deny' doc='Add denied IMSI to the list' />
-        <param name='[REGEXP]' doc='Regexp for IMSIs' />
-        <param name='<0-256>' doc='CM Service Reject reason' />
-        <param name='<0-256>' doc='LU Reject reason' />
-      </params>
-    </command>
-    <command id='no access-list NAME'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='access-list' doc='Remove an access-list by name' />
-        <param name='NAME' doc='The access-list to remove' />
-      </params>
-    </command>
-    <command id='number-rewrite FILENAME'>
-      <params>
-        <param name='number-rewrite' doc='Set the file with rewriting rules.' />
-        <param name='FILENAME' doc='Filename' />
-      </params>
-    </command>
-    <command id='no number-rewrite'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='number-rewrite' doc='Set the file with rewriting rules.' />
-      </params>
-    </command>
-    <command id='number-rewrite-post FILENAME'>
-      <params>
-        <param name='number-rewrite-post' doc='Set the file with post-routing rewriting rules.' />
-        <param name='FILENAME' doc='Filename' />
-      </params>
-    </command>
-    <command id='no number-rewrite-post'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='number-rewrite-post' doc='Set the file with post-routing rewriting rules.' />
-      </params>
-    </command>
-    <command id='rewrite-smsc addr FILENAME'>
-      <params>
-        <param name='rewrite-smsc' doc='SMSC Rewriting' />
-        <param name='addr' doc='The SMSC Address to match and replace in RP-DATA' />
-        <param name='FILENAME' doc='File with rules for the SMSC Address replacing' />
-      </params>
-    </command>
-    <command id='rewrite-smsc tp-dest-match FILENAME'>
-      <params>
-        <param name='rewrite-smsc' doc='SMSC Rewriting' />
-        <param name='tp-dest-match' doc='Match TP-Destination of a SMS.' />
-        <param name='FILENAME' doc='File with rules for matching MSISDN and TP-DEST' />
-      </params>
-    </command>
-    <command id='sms-clear-tp-srr FILENAME'>
-      <params>
-        <param name='sms-clear-tp-srr' doc='SMS TPDU Sender Report Request clearing' />
-        <param name='FILENAME' doc='Files with rules for matching MSISDN' />
-      </params>
-    </command>
-    <command id='no sms-clear-tp-srr'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='sms-clear-tp-srr' doc='SMS TPDU Sender Report Request clearing' />
-      </params>
-    </command>
-    <command id='sms-number-rewrite FILENAME'>
-      <params>
-        <param name='sms-number-rewrite' doc='SMS TP-DA Number rewriting' />
-        <param name='FILENAME' doc='Files with rules for matching MSISDN' />
-      </params>
-    </command>
-    <command id='no sms-number-rewrite'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='sms-number-rewrite' doc='Disable SMS TP-DA rewriting' />
-      </params>
-    </command>
-    <command id='prefix-tree FILENAME'>
-      <params>
-        <param name='prefix-tree' doc='Prefix tree for number rewriting' />
-        <param name='FILENAME' doc='File to load' />
-      </params>
-    </command>
-    <command id='no prefix-tree'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='prefix-tree' doc='Prefix tree for number rewriting' />
-      </params>
-    </command>
-    <command id='paging-group <0-1000>'>
-      <params>
-        <param name='paging-group' doc='Create a Paging Group' />
-        <param name='<0-1000>' doc='Number of the Group' />
-      </params>
-    </command>
-    <command id='no paging-group <0-1000>'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='paging-group' doc='Delete paging-group' />
-        <param name='<0-1000>' doc='Paging-group number' />
-      </params>
-    </command>
-    <command id='bsc BSC_NR'>
-      <params>
-        <param name='bsc' doc='BSC configuration' />
-        <param name='BSC_NR' doc='Identifier of the BSC' />
-      </params>
-    </command>
-  </node>
-  <node id='24'>
-    <command id='help'>
-      <params>
-        <param name='help' doc='Description of the interactive help system' />
-      </params>
-    </command>
-    <command id='list'>
-      <params>
-        <param name='list' doc='Print command list' />
-      </params>
-    </command>
-    <command id='write terminal'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='terminal' doc='Write to terminal' />
-      </params>
-    </command>
-    <command id='write file'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='file' doc='Write to configuration file' />
-      </params>
-    </command>
-    <command id='write memory'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='memory' doc='Write configuration to the file (same as write file)' />
-      </params>
-    </command>
-    <command id='write'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-      </params>
-    </command>
-    <command id='show running-config'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='running-config' doc='running configuration' />
-      </params>
-    </command>
-    <command id='exit'>
-      <params>
-        <param name='exit' doc='Exit current mode and down to previous mode' />
-      </params>
-    </command>
-    <command id='end'>
-      <params>
-        <param name='end' doc='End current mode and change to enable mode.' />
-      </params>
-    </command>
-    <command id='token TOKEN'>
-      <params>
-        <param name='token' doc='Authentication token configuration' />
-        <param name='TOKEN' doc='Token of the BSC, currently transferred in cleartext' />
-      </params>
-    </command>
-    <command id='location_area_code <0-65535>'>
-      <params>
-        <param name='location_area_code' doc='Add the Location Area Code (LAC) of this BSC' />
-        <param name='<0-65535>' doc='LAC' />
-      </params>
-    </command>
-    <command id='no location_area_code <0-65535>'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='location_area_code' doc='Remove the Location Area Code (LAC) of this BSC' />
-        <param name='<0-65535>' doc='LAC' />
-      </params>
-    </command>
-    <command id='paging forbidden (0|1)'>
-      <params>
-        <param name='paging' doc='Paging' />
-        <param name='forbidden' doc='Forbid sending PAGING REQUESTS to the BSC.' />
-        <param name='0' doc='Do not forbid' />
-        <param name='1' doc='Forbid' />
-      </params>
-    </command>
-    <command id='description DESC'>
-      <params>
-        <param name='description' doc='Provide a description for the given BSC.' />
-        <param name='DESC' doc='Description' />
-      </params>
-    </command>
-    <command id='access-list-name NAME'>
-      <params>
-        <param name='access-list-name' doc='Set the name of the access list to use.' />
-        <param name='NAME' doc='The name of the to be used access list.' />
-      </params>
-    </command>
-    <command id='no access-list-name'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='access-list-name' doc='Do not use an access-list for the BSC.' />
-      </params>
-    </command>
-    <command id='max-endpoints <1-1024>'>
-      <params>
-        <param name='max-endpoints' doc='Highest endpoint to use (exclusively)' />
-        <param name='<1-1024>' doc='Number of ports' />
-      </params>
-    </command>
-    <command id='paging-group <0-1000>'>
-      <params>
-        <param name='paging-group' doc='Use a paging group' />
-        <param name='<0-1000>' doc='Paging Group to use' />
-      </params>
-    </command>
-    <command id='paging group <0-1000>'>
-      <params>
-        <param name='paging' doc='Paging' />
-        <param name='group' doc='Use a paging group' />
-        <param name='<0-1000>' doc='Paging Group to use' />
-      </params>
-    </command>
-    <command id='no paging group'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='paging' doc='Paging' />
-        <param name='group' doc='Disable the usage of a paging group.' />
-      </params>
-    </command>
-  </node>
-  <node id='27'>
-    <command id='help'>
-      <params>
-        <param name='help' doc='Description of the interactive help system' />
-      </params>
-    </command>
-    <command id='list'>
-      <params>
-        <param name='list' doc='Print command list' />
-      </params>
-    </command>
-    <command id='write terminal'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='terminal' doc='Write to terminal' />
-      </params>
-    </command>
-    <command id='write file'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='file' doc='Write to configuration file' />
-      </params>
-    </command>
-    <command id='write memory'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='memory' doc='Write configuration to the file (same as write file)' />
-      </params>
-    </command>
-    <command id='write'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-      </params>
-    </command>
-    <command id='show running-config'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='running-config' doc='running configuration' />
-      </params>
-    </command>
-    <command id='exit'>
-      <params>
-        <param name='exit' doc='Exit current mode and down to previous mode' />
-      </params>
-    </command>
-    <command id='end'>
-      <params>
-        <param name='end' doc='End current mode and change to enable mode.' />
-      </params>
-    </command>
-    <command id='rtp keep-alive <1-120>'>
-      <params>
-        <param name='rtp' doc='RTP configuration' />
-        <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' />
-        <param name='<1-120>' doc='Keep-alive interval in secs' />
-      </params>
-    </command>
-    <command id='rtp keep-alive once'>
-      <params>
-        <param name='rtp' doc='RTP configuration' />
-        <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' />
-        <param name='once' doc='Send dummy packet only once after CRCX/MDCX' />
-      </params>
-    </command>
-    <command id='no rtp keep-alive'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='rtp' doc='RTP configuration' />
-        <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' />
-      </params>
-    </command>
-    <command id='sdp audio-payload number <1-255>'>
-      <params>
-        <param name='sdp' doc='SDP File related options' />
-        <param name='audio-payload' doc='Audio payload options' />
-        <param name='number' doc='Number' />
-        <param name='<1-255>' doc='Payload Number' />
-      </params>
-    </command>
-    <command id='sdp audio-payload name NAME'>
-      <params>
-        <param name='sdp' doc='SDP File related options' />
-        <param name='audio-payload' doc='Audio payload options' />
-        <param name='name' doc='Payload' />
-        <param name='NAME' doc='Payload Name' />
-      </params>
-    </command>
-    <command id='sdp audio payload number <1-255>'>
-      <params>
-        <param name='sdp' doc='SDP File related options' />
-        <param name='audio' doc='Audio payload options' />
-        <param name='payload' doc='Audio payload options' />
-        <param name='number' doc='Number' />
-        <param name='<1-255>' doc='Payload Number' />
-      </params>
-    </command>
-    <command id='sdp audio payload name NAME'>
-      <params>
-        <param name='sdp' doc='SDP File related options' />
-        <param name='audio' doc='Audio payload options' />
-        <param name='payload' doc='Audio payload options' />
-        <param name='name' doc='Payload' />
-        <param name='NAME' doc='Payload Name' />
-      </params>
-    </command>
-    <command id='loop (0|1)'>
-      <params>
-        <param name='loop' doc='Loop audio for all endpoints on this trunk' />
-        <param name='0' doc='Don't Loop' />
-        <param name='1' doc='Loop' />
-      </params>
-    </command>
-    <command id='rtcp-omit'>
-      <params>
-        <param name='rtcp-omit' doc='Drop RTCP packets in both directions' />
-      </params>
-    </command>
-    <command id='no rtcp-omit'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='rtcp-omit' doc='Drop RTCP packets in both directions' />
-      </params>
-    </command>
-    <command id='rtp-patch ssrc'>
-      <params>
-        <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
-        <param name='ssrc' doc='Force a fixed SSRC' />
-      </params>
-    </command>
-    <command id='no rtp-patch ssrc'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
-        <param name='ssrc' doc='Force a fixed SSRC' />
-      </params>
-    </command>
-    <command id='rtp-patch timestamp'>
-      <params>
-        <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
-        <param name='timestamp' doc='Adjust RTP timestamp' />
-      </params>
-    </command>
-    <command id='no rtp-patch timestamp'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
-        <param name='timestamp' doc='Adjust RTP timestamp' />
-      </params>
-    </command>
-    <command id='no rtp-patch'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
-      </params>
-    </command>
-    <command id='sdp audio fmtp-extra .NAME'>
-      <params>
-        <param name='sdp' doc='Add extra fmtp for the SDP file' />
-        <param name='audio' doc='Audio' />
-        <param name='fmtp-extra' doc='Fmtp-extra' />
-        <param name='.NAME' doc='Extra Information' />
-      </params>
-    </command>
-    <command id='sdp audio-payload send-ptime'>
-      <params>
-        <param name='sdp' doc='SDP File related options' />
-        <param name='audio-payload' doc='Audio payload options' />
-        <param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' />
-      </params>
-    </command>
-    <command id='no sdp audio-payload send-ptime'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='sdp' doc='SDP File related options' />
-        <param name='audio-payload' doc='Audio payload options' />
-        <param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' />
-      </params>
-    </command>
-  </node>
-  <node id='28'>
-    <command id='help'>
-      <params>
-        <param name='help' doc='Description of the interactive help system' />
-      </params>
-    </command>
-    <command id='list'>
-      <params>
-        <param name='list' doc='Print command list' />
-      </params>
-    </command>
-    <command id='write terminal'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='terminal' doc='Write to terminal' />
-      </params>
-    </command>
-    <command id='write file'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='file' doc='Write to configuration file' />
-      </params>
-    </command>
-    <command id='write memory'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='memory' doc='Write configuration to the file (same as write file)' />
-      </params>
-    </command>
-    <command id='write'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-      </params>
-    </command>
-    <command id='show running-config'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='running-config' doc='running configuration' />
-      </params>
-    </command>
-    <command id='exit'>
-      <params>
-        <param name='exit' doc='Exit current mode and down to previous mode' />
-      </params>
-    </command>
-    <command id='end'>
-      <params>
-        <param name='end' doc='End current mode and change to enable mode.' />
-      </params>
-    </command>
-    <command id='location_area_code <0-65535>'>
-      <params>
-        <param name='location_area_code' doc='Add the Location Area Code (LAC)' />
-        <param name='<0-65535>' doc='LAC' />
-      </params>
-    </command>
-    <command id='no location_area_code <0-65535>'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='location_area_code' doc='Remove the Location Area Code (LAC)' />
-        <param name='<0-65535>' doc='LAC' />
-      </params>
-    </command>
-  </node>
-</vtydoc>
\ No newline at end of file
+<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
+  <node id='_common_cmds_'>
+    <name>Common Commands</name>
+    <description>These commands are available on all VTY nodes. They are listed here only once, to unclutter the VTY reference.</description>
+    <command id='help'>
+      <params>
+        <param name='help' doc='Description of the interactive help system' />
+      </params>
+    </command>
+    <command id='list'>
+      <params>
+        <param name='list' doc='Print command list' />
+      </params>
+    </command>
+    <command id='write terminal'>
+      <params>
+        <param name='write' doc='Write running configuration to memory, network, or terminal' />
+        <param name='terminal' doc='Write to terminal' />
+      </params>
+    </command>
+    <command id='write file'>
+      <params>
+        <param name='write' doc='Write running configuration to memory, network, or terminal' />
+        <param name='file' doc='Write to configuration file' />
+      </params>
+    </command>
+    <command id='write memory'>
+      <params>
+        <param name='write' doc='Write running configuration to memory, network, or terminal' />
+        <param name='memory' doc='Write configuration to the file (same as write file)' />
+      </params>
+    </command>
+    <command id='write'>
+      <params>
+        <param name='write' doc='Write running configuration to memory, network, or terminal' />
+      </params>
+    </command>
+    <command id='show running-config'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='running-config' doc='running configuration' />
+      </params>
+    </command>
+    <command id='exit'>
+      <params>
+        <param name='exit' doc='Exit current mode and down to previous mode' />
+      </params>
+    </command>
+    <command id='end'>
+      <params>
+        <param name='end' doc='End current mode and change to enable mode.' />
+      </params>
+    </command>
+  </node>
+  <node id='view'>
+    <name>view</name>
+    <command id='show version'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='version' doc='Displays program version' />
+      </params>
+    </command>
+    <command id='show online-help'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='online-help' doc='Online help' />
+      </params>
+    </command>
+    <command id='enable'>
+      <params>
+        <param name='enable' doc='Turn on privileged mode command' />
+      </params>
+    </command>
+    <command id='terminal length <0-512>'>
+      <params>
+        <param name='terminal' doc='Set terminal line parameters' />
+        <param name='length' doc='Set number of lines on a screen' />
+        <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' />
+      </params>
+    </command>
+    <command id='terminal no length'>
+      <params>
+        <param name='terminal' doc='Set terminal line parameters' />
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='length' doc='Set number of lines on a screen' />
+      </params>
+    </command>
+    <command id='who'>
+      <params>
+        <param name='who' doc='Display who is on vty' />
+      </params>
+    </command>
+    <command id='show history'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='history' doc='Display the session command history' />
+      </params>
+    </command>
+    <command id='logging enable'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='enable' doc='Enables logging to this vty' />
+      </params>
+    </command>
+    <command id='logging disable'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='disable' doc='Disables logging to this vty' />
+      </params>
+    </command>
+    <command id='logging filter all (0|1)'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='filter' doc='Filter log messages' />
+        <param name='all' doc='Do you want to log all messages?' />
+        <param name='0' doc='Only print messages matched by other filters' />
+        <param name='1' doc='Bypass filter and print all messages' />
+      </params>
+    </command>
+    <command id='logging color (0|1)'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='color' doc='Configure color-printing for log messages' />
+        <param name='0' doc='Don't use color for printing messages' />
+        <param name='1' doc='Use color for printing messages' />
+      </params>
+    </command>
+    <command id='logging timestamp (0|1)'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='timestamp' doc='Configure log message timestamping' />
+        <param name='0' doc='Don't prefix each log message' />
+        <param name='1' doc='Prefix each log message with current timestamp' />
+      </params>
+    </command>
+    <command id='logging print extended-timestamp (0|1)'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='print' doc='Log output settings' />
+        <param name='extended-timestamp' doc='Configure log message timestamping' />
+        <param name='0' doc='Don't prefix each log message' />
+        <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
+      </params>
+    </command>
+    <command id='logging print category (0|1)'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='print' doc='Log output settings' />
+        <param name='category' doc='Configure log message' />
+        <param name='0' doc='Don't prefix each log message' />
+        <param name='1' doc='Prefix each log message with category/subsystem name' />
+      </params>
+    </command>
+    <command id='logging print category-hex (0|1)'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='print' doc='Log output settings' />
+        <param name='category-hex' doc='Configure log message' />
+        <param name='0' doc='Don't prefix each log message' />
+        <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' />
+      </params>
+    </command>
+    <command id='logging print level (0|1)'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='print' doc='Log output settings' />
+        <param name='level' doc='Configure log message' />
+        <param name='0' doc='Don't prefix each log message' />
+        <param name='1' doc='Prefix each log message with the log level name' />
+      </params>
+    </command>
+    <command id='logging print file (0|1|basename) [last]'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='print' doc='Log output settings' />
+        <param name='file' doc='Configure log message' />
+        <param name='0' doc='Don't prefix each log message' />
+        <param name='1' doc='Prefix each log message with the source file and line' />
+        <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' />
+        <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
+      </params>
+    </command>
+    <command id='logging set-log-mask MASK'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='set-log-mask' doc='Set the logmask of this logging target' />
+        <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
+      </params>
+    </command>
+    <command id='logging level (rll|cc|mm|rr|rsl|nm|mncc|pag|meas|sccp|msc|mgcp|ho|db|ref|gprs|ns|bssgp|llc|sndcp|nat|ctrl|smpp|filter|ranap|sua|pcu|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='level' doc='Set the log level for a specified category' />
+        <param name='rll' doc='A-bis Radio Link Layer (RLL)' />
+        <param name='cc' doc='Layer3 Call Control (CC)' />
+        <param name='mm' doc='Layer3 Mobility Management (MM)' />
+        <param name='rr' doc='Layer3 Radio Resource (RR)' />
+        <param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' />
+        <param name='nm' doc='A-bis Network Management / O&M (NM/OML)' />
+        <param name='mncc' doc='MNCC API for Call Control application' />
+        <param name='pag' doc='Paging Subsystem' />
+        <param name='meas' doc='Radio Measurement Processing' />
+        <param name='sccp' doc='SCCP Protocol' />
+        <param name='msc' doc='Mobile Switching Center' />
+        <param name='mgcp' doc='Media Gateway Control Protocol' />
+        <param name='ho' doc='Hand-Over' />
+        <param name='db' doc='Database Layer' />
+        <param name='ref' doc='Reference Counting' />
+        <param name='gprs' doc='GPRS Packet Service' />
+        <param name='ns' doc='GPRS Network Service (NS)' />
+        <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' />
+        <param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' />
+        <param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' />
+        <param name='nat' doc='GSM 08.08 NAT/Multiplexer' />
+        <param name='ctrl' doc='Control interface' />
+        <param name='smpp' doc='SMPP interface for external SMS apps' />
+        <param name='filter' doc='BSC/NAT IMSI based filtering' />
+        <param name='ranap' doc='Radio Access Network Application Part Protocol' />
+        <param name='sua' doc='SCCP User Adaptation Protocol' />
+        <param name='pcu' doc='PCU Interface' />
+        <param name='lglobal' doc='Library-internal global log family' />
+        <param name='llapd' doc='LAPD in libosmogsm' />
+        <param name='linp' doc='A-bis Intput Subsystem' />
+        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
+        <param name='lmi' doc='A-bis Input Driver for Signalling' />
+        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
+        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
+        <param name='lctrl' doc='Control Interface' />
+        <param name='lgtp' doc='GPRS GTP library' />
+        <param name='lstats' doc='Statistics messages and logging' />
+        <param name='lgsup' doc='Generic Subscriber Update Protocol' />
+        <param name='loap' doc='Osmocom Authentication Protocol' />
+        <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
+        <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
+        <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
+        <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
+        <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
+        <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
+        <param name='lrspro' doc='Remote SIM protocol' />
+        <param name='debug' doc='Log debug messages and higher levels' />
+        <param name='info' doc='Log informational messages and higher levels' />
+        <param name='notice' doc='Log noticeable messages and higher levels' />
+        <param name='error' doc='Log error messages and higher levels' />
+        <param name='fatal' doc='Log only fatal messages' />
+      </params>
+    </command>
+    <command id='logging level set-all (debug|info|notice|error|fatal)'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='level' doc='Set the log level for a specified category' />
+        <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
+        <param name='debug' doc='Log debug messages and higher levels' />
+        <param name='info' doc='Log informational messages and higher levels' />
+        <param name='notice' doc='Log noticeable messages and higher levels' />
+        <param name='error' doc='Log error messages and higher levels' />
+        <param name='fatal' doc='Log only fatal messages' />
+      </params>
+    </command>
+    <command id='logging level force-all (debug|info|notice|error|fatal)'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='level' doc='Set the log level for a specified category' />
+        <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' />
+        <param name='debug' doc='Log debug messages and higher levels' />
+        <param name='info' doc='Log informational messages and higher levels' />
+        <param name='notice' doc='Log noticeable messages and higher levels' />
+        <param name='error' doc='Log error messages and higher levels' />
+        <param name='fatal' doc='Log only fatal messages' />
+      </params>
+    </command>
+    <command id='no logging level force-all'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='logging' doc='Configure logging' />
+        <param name='level' doc='Set the log level for a specified category' />
+        <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' />
+      </params>
+    </command>
+    <command id='show logging vty'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='logging' doc='Show current logging configuration' />
+        <param name='vty' doc='Show current logging configuration for this vty' />
+      </params>
+    </command>
+    <command id='show alarms'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='alarms' doc='Show current logging configuration' />
+      </params>
+    </command>
+    <command id='show stats'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='stats' doc='Show statistical values' />
+      </params>
+    </command>
+    <command id='show stats level (global|peer|subscriber)'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='stats' doc='Show statistical values' />
+        <param name='level' doc='Set the maximum group level' />
+        <param name='global' doc='Show global groups only' />
+        <param name='peer' doc='Show global and network peer related groups' />
+        <param name='subscriber' doc='Show global, peer, and subscriber groups' />
+      </params>
+    </command>
+    <command id='show asciidoc counters'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='asciidoc' doc='Asciidoc generation' />
+        <param name='counters' doc='Generate table of all registered counters' />
+      </params>
+    </command>
+    <command id='show rate-counters'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='rate-counters' doc='Show all rate counters' />
+      </params>
+    </command>
+    <command id='show sccp connections'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='sccp' doc='Display information about SCCP' />
+        <param name='connections' doc='All active connections' />
+      </params>
+    </command>
+    <command id='show bsc connections'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='bsc' doc='Information about BSCs' />
+        <param name='connections' doc='All active connections' />
+      </params>
+    </command>
+    <command id='show nat num-bscs-configured'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='nat' doc='Display NAT configuration details' />
+        <param name='num-bscs-configured' doc='BSCs-related' />
+      </params>
+    </command>
+    <command id='show bsc status (nr|token|lac|all) [IDENT]'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='bsc' doc='Information about BSCs' />
+        <param name='status' doc='Status of BSC' />
+        <param name='nr' doc='Identify BSC by nr' />
+        <param name='token' doc='Identify BSC by token' />
+        <param name='lac' doc='Identify BSC by lac' />
+        <param name='all' doc='Show all BSC' />
+        <param name='[IDENT]' doc='NR/token/lac of the BSC' />
+      </params>
+    </command>
+    <command id='close bsc connection BSC_NR'>
+      <params>
+        <param name='close' doc='Close' />
+        <param name='bsc' doc='A-link' />
+        <param name='connection' doc='Connection' />
+        <param name='BSC_NR' doc='Identifier of the BSC' />
+      </params>
+    </command>
+    <command id='show msc connection'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='msc' doc='MSC related information' />
+        <param name='connection' doc='Status of the A-link connection' />
+      </params>
+    </command>
+    <command id='test regex PATTERN STRING'>
+      <params>
+        <param name='test' doc='Test utilities' />
+        <param name='regex' doc='Regexp testing' />
+        <param name='PATTERN' doc='The regexp pattern' />
+        <param name='STRING' doc='The string to match' />
+      </params>
+    </command>
+    <command id='show bsc mgcp NR'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='bsc' doc='Information about BSCs' />
+        <param name='mgcp' doc='MGCP related status' />
+        <param name='NR' doc='Identifier of the BSC' />
+      </params>
+    </command>
+    <command id='show bscs-config'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='bscs-config' doc='Show configured BSCs' />
+      </params>
+    </command>
+    <command id='show imsi-black-list'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='imsi-black-list' doc='IMSIs barred from the network' />
+      </params>
+    </command>
+    <command id='show prefix-tree'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='prefix-tree' doc='Prefix tree for number rewriting' />
+      </params>
+    </command>
+    <command id='show ussd-connection'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='ussd-connection' doc='USSD connection related information' />
+      </params>
+    </command>
+    <command id='show access-list NAME'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='access-list' doc='IMSI access list' />
+        <param name='NAME' doc='Name of the access list' />
+      </params>
+    </command>
+    <command id='show mgcp [stats]'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='mgcp' doc='Display information about the MGCP Media Gateway' />
+        <param name='[stats]' doc='Include Statistics' />
+      </params>
+    </command>
+  </node>
+  <node id='enable'>
+    <name>enable</name>
+    <command id='disable'>
+      <params>
+        <param name='disable' doc='Turn off privileged mode command' />
+      </params>
+    </command>
+    <command id='configure terminal'>
+      <params>
+        <param name='configure' doc='Configuration from vty interface' />
+        <param name='terminal' doc='Configuration terminal' />
+      </params>
+    </command>
+    <command id='copy running-config startup-config'>
+      <params>
+        <param name='copy' doc='Copy configuration' />
+        <param name='running-config' doc='Copy running config to... ' />
+        <param name='startup-config' doc='Copy running config to startup config (same as write file)' />
+      </params>
+    </command>
+    <command id='show startup-config'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='startup-config' doc='Contentes of startup configuration' />
+      </params>
+    </command>
+    <command id='show version'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='version' doc='Displays program version' />
+      </params>
+    </command>
+    <command id='show online-help'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='online-help' doc='Online help' />
+      </params>
+    </command>
+    <command id='terminal length <0-512>'>
+      <params>
+        <param name='terminal' doc='Set terminal line parameters' />
+        <param name='length' doc='Set number of lines on a screen' />
+        <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' />
+      </params>
+    </command>
+    <command id='terminal no length'>
+      <params>
+        <param name='terminal' doc='Set terminal line parameters' />
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='length' doc='Set number of lines on a screen' />
+      </params>
+    </command>
+    <command id='who'>
+      <params>
+        <param name='who' doc='Display who is on vty' />
+      </params>
+    </command>
+    <command id='show history'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='history' doc='Display the session command history' />
+      </params>
+    </command>
+    <command id='terminal monitor'>
+      <params>
+        <param name='terminal' doc='Set terminal line parameters' />
+        <param name='monitor' doc='Copy debug output to the current terminal line' />
+      </params>
+    </command>
+    <command id='terminal no monitor'>
+      <params>
+        <param name='terminal' doc='Set terminal line parameters' />
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='monitor' doc='Copy debug output to the current terminal line' />
+      </params>
+    </command>
+    <command id='logging enable'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='enable' doc='Enables logging to this vty' />
+      </params>
+    </command>
+    <command id='logging disable'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='disable' doc='Disables logging to this vty' />
+      </params>
+    </command>
+    <command id='logging filter all (0|1)'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='filter' doc='Filter log messages' />
+        <param name='all' doc='Do you want to log all messages?' />
+        <param name='0' doc='Only print messages matched by other filters' />
+        <param name='1' doc='Bypass filter and print all messages' />
+      </params>
+    </command>
+    <command id='logging color (0|1)'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='color' doc='Configure color-printing for log messages' />
+        <param name='0' doc='Don't use color for printing messages' />
+        <param name='1' doc='Use color for printing messages' />
+      </params>
+    </command>
+    <command id='logging timestamp (0|1)'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='timestamp' doc='Configure log message timestamping' />
+        <param name='0' doc='Don't prefix each log message' />
+        <param name='1' doc='Prefix each log message with current timestamp' />
+      </params>
+    </command>
+    <command id='logging print extended-timestamp (0|1)'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='print' doc='Log output settings' />
+        <param name='extended-timestamp' doc='Configure log message timestamping' />
+        <param name='0' doc='Don't prefix each log message' />
+        <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
+      </params>
+    </command>
+    <command id='logging print category (0|1)'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='print' doc='Log output settings' />
+        <param name='category' doc='Configure log message' />
+        <param name='0' doc='Don't prefix each log message' />
+        <param name='1' doc='Prefix each log message with category/subsystem name' />
+      </params>
+    </command>
+    <command id='logging print category-hex (0|1)'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='print' doc='Log output settings' />
+        <param name='category-hex' doc='Configure log message' />
+        <param name='0' doc='Don't prefix each log message' />
+        <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' />
+      </params>
+    </command>
+    <command id='logging print level (0|1)'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='print' doc='Log output settings' />
+        <param name='level' doc='Configure log message' />
+        <param name='0' doc='Don't prefix each log message' />
+        <param name='1' doc='Prefix each log message with the log level name' />
+      </params>
+    </command>
+    <command id='logging print file (0|1|basename) [last]'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='print' doc='Log output settings' />
+        <param name='file' doc='Configure log message' />
+        <param name='0' doc='Don't prefix each log message' />
+        <param name='1' doc='Prefix each log message with the source file and line' />
+        <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' />
+        <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
+      </params>
+    </command>
+    <command id='logging set-log-mask MASK'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='set-log-mask' doc='Set the logmask of this logging target' />
+        <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
+      </params>
+    </command>
+    <command id='logging level (rll|cc|mm|rr|rsl|nm|mncc|pag|meas|sccp|msc|mgcp|ho|db|ref|gprs|ns|bssgp|llc|sndcp|nat|ctrl|smpp|filter|ranap|sua|pcu|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='level' doc='Set the log level for a specified category' />
+        <param name='rll' doc='A-bis Radio Link Layer (RLL)' />
+        <param name='cc' doc='Layer3 Call Control (CC)' />
+        <param name='mm' doc='Layer3 Mobility Management (MM)' />
+        <param name='rr' doc='Layer3 Radio Resource (RR)' />
+        <param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' />
+        <param name='nm' doc='A-bis Network Management / O&M (NM/OML)' />
+        <param name='mncc' doc='MNCC API for Call Control application' />
+        <param name='pag' doc='Paging Subsystem' />
+        <param name='meas' doc='Radio Measurement Processing' />
+        <param name='sccp' doc='SCCP Protocol' />
+        <param name='msc' doc='Mobile Switching Center' />
+        <param name='mgcp' doc='Media Gateway Control Protocol' />
+        <param name='ho' doc='Hand-Over' />
+        <param name='db' doc='Database Layer' />
+        <param name='ref' doc='Reference Counting' />
+        <param name='gprs' doc='GPRS Packet Service' />
+        <param name='ns' doc='GPRS Network Service (NS)' />
+        <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' />
+        <param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' />
+        <param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' />
+        <param name='nat' doc='GSM 08.08 NAT/Multiplexer' />
+        <param name='ctrl' doc='Control interface' />
+        <param name='smpp' doc='SMPP interface for external SMS apps' />
+        <param name='filter' doc='BSC/NAT IMSI based filtering' />
+        <param name='ranap' doc='Radio Access Network Application Part Protocol' />
+        <param name='sua' doc='SCCP User Adaptation Protocol' />
+        <param name='pcu' doc='PCU Interface' />
+        <param name='lglobal' doc='Library-internal global log family' />
+        <param name='llapd' doc='LAPD in libosmogsm' />
+        <param name='linp' doc='A-bis Intput Subsystem' />
+        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
+        <param name='lmi' doc='A-bis Input Driver for Signalling' />
+        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
+        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
+        <param name='lctrl' doc='Control Interface' />
+        <param name='lgtp' doc='GPRS GTP library' />
+        <param name='lstats' doc='Statistics messages and logging' />
+        <param name='lgsup' doc='Generic Subscriber Update Protocol' />
+        <param name='loap' doc='Osmocom Authentication Protocol' />
+        <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
+        <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
+        <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
+        <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
+        <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
+        <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
+        <param name='lrspro' doc='Remote SIM protocol' />
+        <param name='debug' doc='Log debug messages and higher levels' />
+        <param name='info' doc='Log informational messages and higher levels' />
+        <param name='notice' doc='Log noticeable messages and higher levels' />
+        <param name='error' doc='Log error messages and higher levels' />
+        <param name='fatal' doc='Log only fatal messages' />
+      </params>
+    </command>
+    <command id='logging level set-all (debug|info|notice|error|fatal)'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='level' doc='Set the log level for a specified category' />
+        <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
+        <param name='debug' doc='Log debug messages and higher levels' />
+        <param name='info' doc='Log informational messages and higher levels' />
+        <param name='notice' doc='Log noticeable messages and higher levels' />
+        <param name='error' doc='Log error messages and higher levels' />
+        <param name='fatal' doc='Log only fatal messages' />
+      </params>
+    </command>
+    <command id='logging level force-all (debug|info|notice|error|fatal)'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='level' doc='Set the log level for a specified category' />
+        <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' />
+        <param name='debug' doc='Log debug messages and higher levels' />
+        <param name='info' doc='Log informational messages and higher levels' />
+        <param name='notice' doc='Log noticeable messages and higher levels' />
+        <param name='error' doc='Log error messages and higher levels' />
+        <param name='fatal' doc='Log only fatal messages' />
+      </params>
+    </command>
+    <command id='no logging level force-all'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='logging' doc='Configure logging' />
+        <param name='level' doc='Set the log level for a specified category' />
+        <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' />
+      </params>
+    </command>
+    <command id='show logging vty'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='logging' doc='Show current logging configuration' />
+        <param name='vty' doc='Show current logging configuration for this vty' />
+      </params>
+    </command>
+    <command id='show alarms'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='alarms' doc='Show current logging configuration' />
+      </params>
+    </command>
+    <command id='show stats'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='stats' doc='Show statistical values' />
+      </params>
+    </command>
+    <command id='show stats level (global|peer|subscriber)'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='stats' doc='Show statistical values' />
+        <param name='level' doc='Set the maximum group level' />
+        <param name='global' doc='Show global groups only' />
+        <param name='peer' doc='Show global and network peer related groups' />
+        <param name='subscriber' doc='Show global, peer, and subscriber groups' />
+      </params>
+    </command>
+    <command id='show asciidoc counters'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='asciidoc' doc='Asciidoc generation' />
+        <param name='counters' doc='Generate table of all registered counters' />
+      </params>
+    </command>
+    <command id='show rate-counters'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='rate-counters' doc='Show all rate counters' />
+      </params>
+    </command>
+    <command id='show sccp connections'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='sccp' doc='Display information about SCCP' />
+        <param name='connections' doc='All active connections' />
+      </params>
+    </command>
+    <command id='show bsc connections'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='bsc' doc='Information about BSCs' />
+        <param name='connections' doc='All active connections' />
+      </params>
+    </command>
+    <command id='show nat num-bscs-configured'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='nat' doc='Display NAT configuration details' />
+        <param name='num-bscs-configured' doc='BSCs-related' />
+      </params>
+    </command>
+    <command id='show bsc status (nr|token|lac|all) [IDENT]'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='bsc' doc='Information about BSCs' />
+        <param name='status' doc='Status of BSC' />
+        <param name='nr' doc='Identify BSC by nr' />
+        <param name='token' doc='Identify BSC by token' />
+        <param name='lac' doc='Identify BSC by lac' />
+        <param name='all' doc='Show all BSC' />
+        <param name='[IDENT]' doc='NR/token/lac of the BSC' />
+      </params>
+    </command>
+    <command id='close bsc connection BSC_NR'>
+      <params>
+        <param name='close' doc='Close' />
+        <param name='bsc' doc='A-link' />
+        <param name='connection' doc='Connection' />
+        <param name='BSC_NR' doc='Identifier of the BSC' />
+      </params>
+    </command>
+    <command id='show msc connection'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='msc' doc='MSC related information' />
+        <param name='connection' doc='Status of the A-link connection' />
+      </params>
+    </command>
+    <command id='test regex PATTERN STRING'>
+      <params>
+        <param name='test' doc='Test utilities' />
+        <param name='regex' doc='Regexp testing' />
+        <param name='PATTERN' doc='The regexp pattern' />
+        <param name='STRING' doc='The string to match' />
+      </params>
+    </command>
+    <command id='show bsc mgcp NR'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='bsc' doc='Information about BSCs' />
+        <param name='mgcp' doc='MGCP related status' />
+        <param name='NR' doc='Identifier of the BSC' />
+      </params>
+    </command>
+    <command id='show bscs-config'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='bscs-config' doc='Show configured BSCs' />
+      </params>
+    </command>
+    <command id='show imsi-black-list'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='imsi-black-list' doc='IMSIs barred from the network' />
+      </params>
+    </command>
+    <command id='show prefix-tree'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='prefix-tree' doc='Prefix tree for number rewriting' />
+      </params>
+    </command>
+    <command id='show ussd-connection'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='ussd-connection' doc='USSD connection related information' />
+      </params>
+    </command>
+    <command id='set bsc last-used-endpoint <0-9999999999> <0-1024>'>
+      <params>
+        <param name='set' doc='Set a value' />
+        <param name='bsc' doc='Operate on a BSC' />
+        <param name='last-used-endpoint' doc='Last used endpoint for an assignment' />
+        <param name='<0-9999999999>' doc='BSC configuration number' />
+        <param name='<0-1024>' doc='Endpoint number used' />
+      </params>
+    </command>
+    <command id='nat-block (block|unblock)'>
+      <params>
+        <param name='nat-block' doc='Block the NAT for new connections' />
+        <param name='block' doc='Block' />
+        <param name='unblock' doc='Unblock' />
+      </params>
+    </command>
+    <command id='show access-list NAME'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='access-list' doc='IMSI access list' />
+        <param name='NAME' doc='Name of the access list' />
+      </params>
+    </command>
+    <command id='show mgcp [stats]'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='mgcp' doc='Display information about the MGCP Media Gateway' />
+        <param name='[stats]' doc='Include Statistics' />
+      </params>
+    </command>
+    <command id='loop-endpoint <0-64> NAME (0|1)'>
+      <params>
+        <param name='loop-endpoint' doc='Loop a given endpoint' />
+        <param name='<0-64>' doc='Trunk number' />
+        <param name='NAME' doc='The name in hex of the endpoint' />
+        <param name='0' doc='Disable the loop' />
+        <param name='1' doc='Enable the loop' />
+      </params>
+    </command>
+    <command id='tap-call <0-64> ENDPOINT (bts-in|bts-out|net-in|net-out) A.B.C.D <0-65534>'>
+      <params>
+        <param name='tap-call' doc='Forward data on endpoint to a different system' />
+        <param name='<0-64>' doc='Trunk number' />
+        <param name='ENDPOINT' doc='The endpoint in hex' />
+        <param name='bts-in' doc='Forward the data coming from the bts' />
+        <param name='bts-out' doc='Forward the data coming from the bts leaving to the network' />
+        <param name='net-in' doc='Forward the data coming from the net' />
+        <param name='net-out' doc='Forward the data coming from the net leaving to the bts' />
+        <param name='A.B.C.D' doc='destination IP of the data' />
+        <param name='<0-65534>' doc='destination port' />
+      </params>
+    </command>
+    <command id='free-endpoint <0-64> NUMBER'>
+      <params>
+        <param name='free-endpoint' doc='Free the given endpoint' />
+        <param name='<0-64>' doc='Trunk number' />
+        <param name='NUMBER' doc='Endpoint number in hex.' />
+      </params>
+    </command>
+    <command id='reset-endpoint <0-64> NUMBER'>
+      <params>
+        <param name='reset-endpoint' doc='Reset the given endpoint' />
+        <param name='<0-64>' doc='Trunk number' />
+        <param name='NUMBER' doc='Endpoint number in hex.' />
+      </params>
+    </command>
+    <command id='reset-all-endpoints'>
+      <params>
+        <param name='reset-all-endpoints' doc='Reset all endpoints' />
+      </params>
+    </command>
+  </node>
+  <node id='config'>
+    <name>config</name>
+    <command id='hostname WORD'>
+      <params>
+        <param name='hostname' doc='Set system's network name' />
+        <param name='WORD' doc='This system's network name' />
+      </params>
+    </command>
+    <command id='no hostname [HOSTNAME]'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='hostname' doc='Reset system's network name' />
+        <param name='[HOSTNAME]' doc='Host name of this router' />
+      </params>
+    </command>
+    <command id='password (8|) WORD'>
+      <params>
+        <param name='password' doc='Assign the terminal connection password' />
+        <param name='8' doc='Specifies a HIDDEN password will follow' />
+        <param name='' doc='dummy string ' />
+        <param name='WORD' doc='The HIDDEN line password string' />
+      </params>
+    </command>
+    <command id='password LINE'>
+      <params>
+        <param name='password' doc='Assign the terminal connection password' />
+        <param name='LINE' doc='The UNENCRYPTED (cleartext) line password' />
+      </params>
+    </command>
+    <command id='enable password (8|) WORD'>
+      <params>
+        <param name='enable' doc='Modify enable password parameters' />
+        <param name='password' doc='Assign the privileged level password' />
+        <param name='8' doc='Specifies a HIDDEN password will follow' />
+        <param name='' doc='dummy string ' />
+        <param name='WORD' doc='The HIDDEN 'enable' password string' />
+      </params>
+    </command>
+    <command id='enable password LINE'>
+      <params>
+        <param name='enable' doc='Modify enable password parameters' />
+        <param name='password' doc='Assign the privileged level password' />
+        <param name='LINE' doc='The UNENCRYPTED (cleartext) 'enable' password' />
+      </params>
+    </command>
+    <command id='no enable password'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='enable' doc='Modify enable password parameters' />
+        <param name='password' doc='Assign the privileged level password' />
+      </params>
+    </command>
+    <command id='banner motd default'>
+      <params>
+        <param name='banner' doc='Set banner string' />
+        <param name='motd' doc='Strings for motd' />
+        <param name='default' doc='Default string' />
+      </params>
+    </command>
+    <command id='banner motd file [FILE]'>
+      <params>
+        <param name='banner' doc='Set banner' />
+        <param name='motd' doc='Banner for motd' />
+        <param name='file' doc='Banner from a file' />
+        <param name='[FILE]' doc='Filename' />
+      </params>
+    </command>
+    <command id='no banner motd'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='banner' doc='Set banner string' />
+        <param name='motd' doc='Strings for motd' />
+      </params>
+    </command>
+    <command id='service terminal-length <0-512>'>
+      <params>
+        <param name='service' doc='Set up miscellaneous service' />
+        <param name='terminal-length' doc='System wide terminal length configuration' />
+        <param name='<0-512>' doc='Number of lines of VTY (0 means no line control)' />
+      </params>
+    </command>
+    <command id='no service terminal-length [<0-512>]'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='service' doc='Set up miscellaneous service' />
+        <param name='terminal-length' doc='System wide terminal length configuration' />
+        <param name='[<0-512>]' doc='Number of lines of VTY (0 means no line control)' />
+      </params>
+    </command>
+    <command id='line vty'>
+      <params>
+        <param name='line' doc='Configure a terminal line' />
+        <param name='vty' doc='Virtual terminal' />
+      </params>
+    </command>
+    <command id='service advanced-vty'>
+      <params>
+        <param name='service' doc='Set up miscellaneous service' />
+        <param name='advanced-vty' doc='Enable advanced mode vty interface' />
+      </params>
+    </command>
+    <command id='no service advanced-vty'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='service' doc='Set up miscellaneous service' />
+        <param name='advanced-vty' doc='Enable advanced mode vty interface' />
+      </params>
+    </command>
+    <command id='show history'>
+      <params>
+        <param name='show' doc='Show running system information' />
+        <param name='history' doc='Display the session command history' />
+      </params>
+    </command>
+    <command id='log stderr'>
+      <params>
+        <param name='log' doc='Configure logging sub-system' />
+        <param name='stderr' doc='Logging via STDERR of the process' />
+      </params>
+    </command>
+    <command id='no log stderr'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='log' doc='Configure logging sub-system' />
+        <param name='stderr' doc='Logging via STDERR of the process' />
+      </params>
+    </command>
+    <command id='log file .FILENAME'>
+      <params>
+        <param name='log' doc='Configure logging sub-system' />
+        <param name='file' doc='Logging to text file' />
+        <param name='.FILENAME' doc='Filename' />
+      </params>
+    </command>
+    <command id='no log file .FILENAME'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='log' doc='Configure logging sub-system' />
+        <param name='file' doc='Logging to text file' />
+        <param name='.FILENAME' doc='Filename' />
+      </params>
+    </command>
+    <command id='log alarms <2-32700>'>
+      <params>
+        <param name='log' doc='Configure logging sub-system' />
+        <param name='alarms' doc='Logging alarms to osmo_strrb' />
+        <param name='<2-32700>' doc='Maximum number of messages to log' />
+      </params>
+    </command>
+    <command id='no log alarms'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='log' doc='Configure logging sub-system' />
+        <param name='alarms' doc='Logging alarms to osmo_strrb' />
+      </params>
+    </command>
+    <command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'>
+      <params>
+        <param name='log' doc='Configure logging sub-system' />
+        <param name='syslog' doc='Logging via syslog' />
+        <param name='authpriv' doc='Security/authorization messages facility' />
+        <param name='cron' doc='Clock daemon (cron/at) facility' />
+        <param name='daemon' doc='General system daemon facility' />
+        <param name='ftp' doc='Ftp daemon facility' />
+        <param name='lpr' doc='Line printer facility' />
+        <param name='mail' doc='Mail facility' />
+        <param name='news' doc='News facility' />
+        <param name='user' doc='Generic facility' />
+        <param name='uucp' doc='UUCP facility' />
+      </params>
+    </command>
+    <command id='log syslog local <0-7>'>
+      <params>
+        <param name='log' doc='Configure logging sub-system' />
+        <param name='syslog' doc='Logging via syslog' />
+        <param name='local' doc='Syslog LOCAL facility' />
+        <param name='<0-7>' doc='Local facility number' />
+      </params>
+    </command>
+    <command id='no log syslog'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='log' doc='Configure logging sub-system' />
+        <param name='syslog' doc='Logging via syslog' />
+      </params>
+    </command>
+    <command id='log gsmtap [HOSTNAME]'>
+      <params>
+        <param name='log' doc='Configure logging sub-system' />
+        <param name='gsmtap' doc='Logging via GSMTAP' />
+        <param name='[HOSTNAME]' doc='Host name to send the GSMTAP logging to (UDP port 4729)' />
+      </params>
+    </command>
+    <command id='stats reporter statsd'>
+      <params>
+        <param name='stats' doc='Configure stats sub-system' />
+        <param name='reporter' doc='Configure a stats reporter' />
+        <param name='statsd' doc='Report to a STATSD server' />
+      </params>
+    </command>
+    <command id='no stats reporter statsd'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='stats' doc='Configure stats sub-system' />
+        <param name='reporter' doc='Configure a stats reporter' />
+        <param name='statsd' doc='Report to a STATSD server' />
+      </params>
+    </command>
+    <command id='stats reporter log'>
+      <params>
+        <param name='stats' doc='Configure stats sub-system' />
+        <param name='reporter' doc='Configure a stats reporter' />
+        <param name='log' doc='Report to the logger' />
+      </params>
+    </command>
+    <command id='no stats reporter log'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='stats' doc='Configure stats sub-system' />
+        <param name='reporter' doc='Configure a stats reporter' />
+        <param name='log' doc='Report to the logger' />
+      </params>
+    </command>
+    <command id='stats interval <1-65535>'>
+      <params>
+        <param name='stats' doc='Configure stats sub-system' />
+        <param name='interval' doc='Set the reporting interval' />
+        <param name='<1-65535>' doc='Interval in seconds' />
+      </params>
+    </command>
+    <command id='nat'>
+      <params>
+        <param name='nat' doc='Configure the NAT' />
+      </params>
+    </command>
+    <command id='mgcp'>
+      <params>
+        <param name='mgcp' doc='Configure the MGCP' />
+      </params>
+    </command>
+    <command id='ctrl'>
+      <params>
+        <param name='ctrl' doc='Configure the Control Interface' />
+      </params>
+    </command>
+  </node>
+  <node id='config-log'>
+    <name>config-log</name>
+    <command id='logging filter all (0|1)'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='filter' doc='Filter log messages' />
+        <param name='all' doc='Do you want to log all messages?' />
+        <param name='0' doc='Only print messages matched by other filters' />
+        <param name='1' doc='Bypass filter and print all messages' />
+      </params>
+    </command>
+    <command id='logging color (0|1)'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='color' doc='Configure color-printing for log messages' />
+        <param name='0' doc='Don't use color for printing messages' />
+        <param name='1' doc='Use color for printing messages' />
+      </params>
+    </command>
+    <command id='logging timestamp (0|1)'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='timestamp' doc='Configure log message timestamping' />
+        <param name='0' doc='Don't prefix each log message' />
+        <param name='1' doc='Prefix each log message with current timestamp' />
+      </params>
+    </command>
+    <command id='logging print extended-timestamp (0|1)'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='print' doc='Log output settings' />
+        <param name='extended-timestamp' doc='Configure log message timestamping' />
+        <param name='0' doc='Don't prefix each log message' />
+        <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
+      </params>
+    </command>
+    <command id='logging print category (0|1)'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='print' doc='Log output settings' />
+        <param name='category' doc='Configure log message' />
+        <param name='0' doc='Don't prefix each log message' />
+        <param name='1' doc='Prefix each log message with category/subsystem name' />
+      </params>
+    </command>
+    <command id='logging print category-hex (0|1)'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='print' doc='Log output settings' />
+        <param name='category-hex' doc='Configure log message' />
+        <param name='0' doc='Don't prefix each log message' />
+        <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' />
+      </params>
+    </command>
+    <command id='logging print level (0|1)'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='print' doc='Log output settings' />
+        <param name='level' doc='Configure log message' />
+        <param name='0' doc='Don't prefix each log message' />
+        <param name='1' doc='Prefix each log message with the log level name' />
+      </params>
+    </command>
+    <command id='logging print file (0|1|basename) [last]'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='print' doc='Log output settings' />
+        <param name='file' doc='Configure log message' />
+        <param name='0' doc='Don't prefix each log message' />
+        <param name='1' doc='Prefix each log message with the source file and line' />
+        <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' />
+        <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
+      </params>
+    </command>
+    <command id='logging level (rll|cc|mm|rr|rsl|nm|mncc|pag|meas|sccp|msc|mgcp|ho|db|ref|gprs|ns|bssgp|llc|sndcp|nat|ctrl|smpp|filter|ranap|sua|pcu|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='level' doc='Set the log level for a specified category' />
+        <param name='rll' doc='A-bis Radio Link Layer (RLL)' />
+        <param name='cc' doc='Layer3 Call Control (CC)' />
+        <param name='mm' doc='Layer3 Mobility Management (MM)' />
+        <param name='rr' doc='Layer3 Radio Resource (RR)' />
+        <param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' />
+        <param name='nm' doc='A-bis Network Management / O&M (NM/OML)' />
+        <param name='mncc' doc='MNCC API for Call Control application' />
+        <param name='pag' doc='Paging Subsystem' />
+        <param name='meas' doc='Radio Measurement Processing' />
+        <param name='sccp' doc='SCCP Protocol' />
+        <param name='msc' doc='Mobile Switching Center' />
+        <param name='mgcp' doc='Media Gateway Control Protocol' />
+        <param name='ho' doc='Hand-Over' />
+        <param name='db' doc='Database Layer' />
+        <param name='ref' doc='Reference Counting' />
+        <param name='gprs' doc='GPRS Packet Service' />
+        <param name='ns' doc='GPRS Network Service (NS)' />
+        <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' />
+        <param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' />
+        <param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' />
+        <param name='nat' doc='GSM 08.08 NAT/Multiplexer' />
+        <param name='ctrl' doc='Control interface' />
+        <param name='smpp' doc='SMPP interface for external SMS apps' />
+        <param name='filter' doc='BSC/NAT IMSI based filtering' />
+        <param name='ranap' doc='Radio Access Network Application Part Protocol' />
+        <param name='sua' doc='SCCP User Adaptation Protocol' />
+        <param name='pcu' doc='PCU Interface' />
+        <param name='lglobal' doc='Library-internal global log family' />
+        <param name='llapd' doc='LAPD in libosmogsm' />
+        <param name='linp' doc='A-bis Intput Subsystem' />
+        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
+        <param name='lmi' doc='A-bis Input Driver for Signalling' />
+        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
+        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
+        <param name='lctrl' doc='Control Interface' />
+        <param name='lgtp' doc='GPRS GTP library' />
+        <param name='lstats' doc='Statistics messages and logging' />
+        <param name='lgsup' doc='Generic Subscriber Update Protocol' />
+        <param name='loap' doc='Osmocom Authentication Protocol' />
+        <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
+        <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
+        <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
+        <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
+        <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
+        <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
+        <param name='lrspro' doc='Remote SIM protocol' />
+        <param name='debug' doc='Log debug messages and higher levels' />
+        <param name='info' doc='Log informational messages and higher levels' />
+        <param name='notice' doc='Log noticeable messages and higher levels' />
+        <param name='error' doc='Log error messages and higher levels' />
+        <param name='fatal' doc='Log only fatal messages' />
+      </params>
+    </command>
+    <command id='logging level set-all (debug|info|notice|error|fatal)'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='level' doc='Set the log level for a specified category' />
+        <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
+        <param name='debug' doc='Log debug messages and higher levels' />
+        <param name='info' doc='Log informational messages and higher levels' />
+        <param name='notice' doc='Log noticeable messages and higher levels' />
+        <param name='error' doc='Log error messages and higher levels' />
+        <param name='fatal' doc='Log only fatal messages' />
+      </params>
+    </command>
+    <command id='logging level force-all (debug|info|notice|error|fatal)'>
+      <params>
+        <param name='logging' doc='Configure logging' />
+        <param name='level' doc='Set the log level for a specified category' />
+        <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' />
+        <param name='debug' doc='Log debug messages and higher levels' />
+        <param name='info' doc='Log informational messages and higher levels' />
+        <param name='notice' doc='Log noticeable messages and higher levels' />
+        <param name='error' doc='Log error messages and higher levels' />
+        <param name='fatal' doc='Log only fatal messages' />
+      </params>
+    </command>
+    <command id='no logging level force-all'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='logging' doc='Configure logging' />
+        <param name='level' doc='Set the log level for a specified category' />
+        <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' />
+      </params>
+    </command>
+  </node>
+  <node id='config-stats'>
+    <name>config-stats</name>
+    <command id='local-ip ADDR'>
+      <params>
+        <param name='local-ip' doc='Set the IP address to which we bind locally' />
+        <param name='ADDR' doc='IP Address' />
+      </params>
+    </command>
+    <command id='no local-ip'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='local-ip' doc='Set the IP address to which we bind locally' />
+      </params>
+    </command>
+    <command id='remote-ip ADDR'>
+      <params>
+        <param name='remote-ip' doc='Set the remote IP address to which we connect' />
+        <param name='ADDR' doc='IP Address' />
+      </params>
+    </command>
+    <command id='remote-port <1-65535>'>
+      <params>
+        <param name='remote-port' doc='Set the remote port to which we connect' />
+        <param name='<1-65535>' doc='Remote port number' />
+      </params>
+    </command>
+    <command id='mtu <100-65535>'>
+      <params>
+        <param name='mtu' doc='Set the maximum packet size' />
+        <param name='<100-65535>' doc='Size in byte' />
+      </params>
+    </command>
+    <command id='no mtu'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='mtu' doc='Set the maximum packet size' />
+      </params>
+    </command>
+    <command id='prefix PREFIX'>
+      <params>
+        <param name='prefix' doc='Set the item name prefix' />
+        <param name='PREFIX' doc='The prefix string' />
+      </params>
+    </command>
+    <command id='no prefix'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='prefix' doc='Set the item name prefix' />
+      </params>
+    </command>
+    <command id='level (global|peer|subscriber)'>
+      <params>
+        <param name='level' doc='Set the maximum group level' />
+        <param name='global' doc='Report global groups only' />
+        <param name='peer' doc='Report global and network peer related groups' />
+        <param name='subscriber' doc='Report global, peer, and subscriber groups' />
+      </params>
+    </command>
+    <command id='enable'>
+      <params>
+        <param name='enable' doc='Enable the reporter' />
+      </params>
+    </command>
+    <command id='disable'>
+      <params>
+        <param name='disable' doc='Disable the reporter' />
+      </params>
+    </command>
+  </node>
+  <node id='config-line'>
+    <name>config-line</name>
+    <command id='login'>
+      <params>
+        <param name='login' doc='Enable password checking' />
+      </params>
+    </command>
+    <command id='no login'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='login' doc='Enable password checking' />
+      </params>
+    </command>
+    <command id='bind A.B.C.D [<0-65535>]'>
+      <params>
+        <param name='bind' doc='Accept VTY telnet connections on local interface' />
+        <param name='A.B.C.D' doc='Local interface IP address (default: 127.0.0.1)' />
+        <param name='[<0-65535>]' doc='Local TCP port number' />
+      </params>
+    </command>
+  </node>
+  <node id='config-ctrl'>
+    <name>config-ctrl</name>
+    <command id='bind A.B.C.D'>
+      <params>
+        <param name='bind' doc='Set bind address to listen for Control connections' />
+        <param name='A.B.C.D' doc='Local IP address (default 127.0.0.1)' />
+      </params>
+    </command>
+  </node>
+  <node id='config-mgcp'>
+    <name>config-mgcp</name>
+    <command id='local ip A.B.C.D'>
+      <params>
+        <param name='local' doc='Local options for the SDP record' />
+        <param name='ip' doc='IP information' />
+        <param name='A.B.C.D' doc='IPv4 Address to use in SDP record' />
+      </params>
+    </command>
+    <command id='bts ip A.B.C.D'>
+      <params>
+        <param name='bts' doc='BTS Audio source/destination options' />
+        <param name='ip' doc='IP information' />
+        <param name='A.B.C.D' doc='IPv4 Address of the BTS' />
+      </params>
+    </command>
+    <command id='bind ip A.B.C.D'>
+      <params>
+        <param name='bind' doc='Listen/Bind related socket option' />
+        <param name='ip' doc='IP information' />
+        <param name='A.B.C.D' doc='IPv4 Address to bind to' />
+      </params>
+    </command>
+    <command id='bind port <0-65534>'>
+      <params>
+        <param name='bind' doc='Listen/Bind related socket option' />
+        <param name='port' doc='Port information' />
+        <param name='<0-65534>' doc='UDP port to listen for MGCP messages' />
+      </params>
+    </command>
+    <command id='bind early (0|1)'>
+      <params>
+        <param name='bind' doc='Listen/Bind related socket option' />
+        <param name='early' doc='Bind local ports on start up' />
+        <param name='0' doc='Bind on demand' />
+        <param name='1' doc='Bind on startup' />
+      </params>
+    </command>
+    <command id='rtp bts-base <0-65534>'>
+      <params>
+        <param name='rtp' doc='RTP configuration' />
+        <param name='bts-base' doc='First UDP port allocated for the BTS side' />
+        <param name='<0-65534>' doc='UDP Port number' />
+      </params>
+    </command>
+    <command id='rtp net-base <0-65534>'>
+      <params>
+        <param name='rtp' doc='RTP configuration' />
+        <param name='net-base' doc='First UDP port allocated for the NET side' />
+        <param name='<0-65534>' doc='UDP Port number' />
+      </params>
+    </command>
+    <command id='rtp bts-range <0-65534> <0-65534>'>
+      <params>
+        <param name='rtp' doc='RTP configuration' />
+        <param name='bts-range' doc='Range of ports to use for the BTS side' />
+        <param name='<0-65534>' doc='Start of the range of ports' />
+        <param name='<0-65534>' doc='End of the range of ports' />
+      </params>
+    </command>
+    <command id='rtp bts-bind-ip A.B.C.D'>
+      <params>
+        <param name='rtp' doc='RTP configuration' />
+        <param name='bts-bind-ip' doc='Bind endpoints facing the BTS' />
+        <param name='A.B.C.D' doc='Address to bind to' />
+      </params>
+    </command>
+    <command id='no rtp bts-bind-ip'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='rtp' doc='RTP configuration' />
+        <param name='bts-bind-ip' doc='Bind endpoints facing the BTS' />
+      </params>
+    </command>
+    <command id='rtp net-range <0-65534> <0-65534>'>
+      <params>
+        <param name='rtp' doc='RTP configuration' />
+        <param name='net-range' doc='Range of ports to use for the NET side' />
+        <param name='<0-65534>' doc='Start of the range of ports' />
+        <param name='<0-65534>' doc='End of the range of ports' />
+      </params>
+    </command>
+    <command id='rtp net-bind-ip A.B.C.D'>
+      <params>
+        <param name='rtp' doc='RTP configuration' />
+        <param name='net-bind-ip' doc='Bind endpoints facing the Network' />
+        <param name='A.B.C.D' doc='Address to bind to' />
+      </params>
+    </command>
+    <command id='no rtp net-bind-ip'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='rtp' doc='RTP configuration' />
+        <param name='net-bind-ip' doc='Bind endpoints facing the Network' />
+      </params>
+    </command>
+    <command id='rtp transcoder-range <0-65534> <0-65534>'>
+      <params>
+        <param name='rtp' doc='RTP configuration' />
+        <param name='transcoder-range' doc='Range of ports to use for the Transcoder' />
+        <param name='<0-65534>' doc='Start of the range of ports' />
+        <param name='<0-65534>' doc='End of the range of ports' />
+      </params>
+    </command>
+    <command id='rtp transcoder-base <0-65534>'>
+      <params>
+        <param name='rtp' doc='RTP configuration' />
+        <param name='transcoder-base' doc='First UDP port allocated for the Transcoder side' />
+        <param name='<0-65534>' doc='UDP Port number' />
+      </params>
+    </command>
+    <command id='rtp ip-dscp <0-255>'>
+      <params>
+        <param name='rtp' doc='RTP configuration' />
+        <param name='ip-dscp' doc='Apply IP_TOS to the audio stream (including Osmux)' />
+        <param name='<0-255>' doc='The DSCP value' />
+      </params>
+    </command>
+    <command id='rtp force-ptime (10|20|40)'>
+      <params>
+        <param name='rtp' doc='RTP configuration' />
+        <param name='force-ptime' doc='Force a fixed ptime for packets sent to the BTSThe required ptime (packet duration) in ms' />
+        <param name='10' doc='10 ms' />
+        <param name='20' doc='20 ms' />
+        <param name='40' doc='40 ms' />
+      </params>
+    </command>
+    <command id='no rtp force-ptime'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='rtp' doc='RTP configuration' />
+        <param name='force-ptime' doc='Force a fixed ptime for packets sent to the BTS' />
+      </params>
+    </command>
+    <command id='rtp keep-alive <1-120>'>
+      <params>
+        <param name='rtp' doc='RTP configuration' />
+        <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' />
+        <param name='<1-120>' doc='Keep alive interval in secs' />
+      </params>
+    </command>
+    <command id='rtp keep-alive once'>
+      <params>
+        <param name='rtp' doc='RTP configuration' />
+        <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' />
+        <param name='once' doc='Send dummy packet only once after CRCX/MDCX' />
+      </params>
+    </command>
+    <command id='no rtp keep-alive'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='rtp' doc='RTP configuration' />
+        <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' />
+      </params>
+    </command>
+    <command id='call-agent ip A.B.C.D'>
+      <params>
+        <param name='call-agent' doc='Callagent information' />
+        <param name='ip' doc='IP information' />
+        <param name='A.B.C.D' doc='IPv4 Address of the callagent' />
+      </params>
+    </command>
+    <command id='transcoder-mgw A.B.C.D'>
+      <params>
+        <param name='transcoder-mgw' doc='Use a MGW to detranscoder RTP' />
+        <param name='A.B.C.D' doc='The IP address of the MGW' />
+      </params>
+    </command>
+    <command id='no transcoder-mgw'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='transcoder-mgw' doc='Disable the transcoding' />
+      </params>
+    </command>
+    <command id='transcoder-remote-base <0-65534>'>
+      <params>
+        <param name='transcoder-remote-base' doc='Set the base port for the transcoder' />
+        <param name='<0-65534>' doc='The RTP base port on the transcoder' />
+      </params>
+    </command>
+    <command id='sdp audio-payload number <0-255>'>
+      <params>
+        <param name='sdp' doc='SDP File related options' />
+        <param name='audio-payload' doc='Audio payload options' />
+        <param name='number' doc='Number' />
+        <param name='<0-255>' doc='Payload number' />
+      </params>
+    </command>
+    <command id='sdp audio-payload name NAME'>
+      <params>
+        <param name='sdp' doc='SDP File related options' />
+        <param name='audio-payload' doc='Audio payload options' />
+        <param name='name' doc='Name' />
+        <param name='NAME' doc='Payload name' />
+      </params>
+    </command>
+    <command id='loop (0|1)'>
+      <params>
+        <param name='loop' doc='Loop audio for all endpoints on main trunk' />
+        <param name='0' doc='Don't Loop' />
+        <param name='1' doc='Loop' />
+      </params>
+    </command>
+    <command id='force-realloc (0|1)'>
+      <params>
+        <param name='force-realloc' doc='Force endpoint reallocation when the endpoint is still seized' />
+        <param name='0' doc='Don't force reallocation' />
+        <param name='1' doc='force reallocation' />
+      </params>
+    </command>
+    <command id='number endpoints <0-65534>'>
+      <params>
+        <param name='number' doc='Number options' />
+        <param name='endpoints' doc='Endpoints available' />
+        <param name='<0-65534>' doc='Number endpoints' />
+      </params>
+    </command>
+    <command id='rtcp-omit'>
+      <params>
+        <param name='rtcp-omit' doc='Drop RTCP packets in both directions' />
+      </params>
+    </command>
+    <command id='no rtcp-omit'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='rtcp-omit' doc='Drop RTCP packets in both directions' />
+      </params>
+    </command>
+    <command id='rtp-patch ssrc'>
+      <params>
+        <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
+        <param name='ssrc' doc='Force a fixed SSRC' />
+      </params>
+    </command>
+    <command id='no rtp-patch ssrc'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
+        <param name='ssrc' doc='Force a fixed SSRC' />
+      </params>
+    </command>
+    <command id='rtp-patch timestamp'>
+      <params>
+        <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
+        <param name='timestamp' doc='Adjust RTP timestamp' />
+      </params>
+    </command>
+    <command id='no rtp-patch timestamp'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
+        <param name='timestamp' doc='Adjust RTP timestamp' />
+      </params>
+    </command>
+    <command id='no rtp-patch'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
+      </params>
+    </command>
+    <command id='sdp audio fmtp-extra .NAME'>
+      <params>
+        <param name='sdp' doc='Add extra fmtp for the SDP file' />
+        <param name='audio' doc='Audio' />
+        <param name='fmtp-extra' doc='Fmtp-extra' />
+        <param name='.NAME' doc='Extra Information' />
+      </params>
+    </command>
+    <command id='sdp audio-payload send-ptime'>
+      <params>
+        <param name='sdp' doc='SDP File related options' />
+        <param name='audio-payload' doc='Audio payload options' />
+        <param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' />
+      </params>
+    </command>
+    <command id='no sdp audio-payload send-ptime'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='sdp' doc='SDP File related options' />
+        <param name='audio-payload' doc='Audio payload options' />
+        <param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' />
+      </params>
+    </command>
+    <command id='sdp audio-payload send-name'>
+      <params>
+        <param name='sdp' doc='SDP File related options' />
+        <param name='audio-payload' doc='Audio payload options' />
+        <param name='send-name' doc='Send SDP rtpmap with the audio name' />
+      </params>
+    </command>
+    <command id='no sdp audio-payload send-name'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='sdp' doc='SDP File related options' />
+        <param name='audio-payload' doc='Audio payload options' />
+        <param name='send-name' doc='Send SDP rtpmap with the audio name' />
+      </params>
+    </command>
+    <command id='osmux (on|off|only)'>
+      <params>
+        <param name='osmux' doc='RTP multiplexing' />
+        <param name='on' doc='Enable OSMUX' />
+        <param name='off' doc='Disable OSMUX' />
+        <param name='only' doc='Only use OSMUX' />
+      </params>
+    </command>
+    <command id='osmux bind-ip A.B.C.D'>
+      <params>
+        <param name='osmux' doc='RTP multiplexing' />
+        <param name='bind-ip' doc='IP information' />
+        <param name='A.B.C.D' doc='IPv4 Address to bind to' />
+      </params>
+    </command>
+    <command id='osmux batch-factor <1-8>'>
+      <params>
+        <param name='osmux' doc='RTP multiplexing' />
+        <param name='batch-factor' doc='Batching factor' />
+        <param name='<1-8>' doc='Number of messages in the batch' />
+      </params>
+    </command>
+    <command id='osmux batch-size <1-65535>'>
+      <params>
+        <param name='osmux' doc='RTP multiplexing' />
+        <param name='batch-size' doc='batch size' />
+        <param name='<1-65535>' doc='Batch size in bytes' />
+      </params>
+    </command>
+    <command id='osmux port <1-65535>'>
+      <params>
+        <param name='osmux' doc='RTP multiplexing' />
+        <param name='port' doc='port' />
+        <param name='<1-65535>' doc='UDP port' />
+      </params>
+    </command>
+    <command id='osmux dummy (on|off)'>
+      <params>
+        <param name='osmux' doc='RTP multiplexing' />
+        <param name='dummy' doc='Dummy padding' />
+        <param name='on' doc='Enable dummy padding' />
+        <param name='off' doc='Disable dummy padding' />
+      </params>
+    </command>
+    <command id='allow-transcoding'>
+      <params>
+        <param name='allow-transcoding' doc='Allow transcoding' />
+      </params>
+    </command>
+    <command id='no allow-transcoding'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='allow-transcoding' doc='Allow transcoding' />
+      </params>
+    </command>
+    <command id='bts-jitter-buffer'>
+      <params>
+        <param name='bts-jitter-buffer' doc='Uplink Jitter Buffer' />
+      </params>
+    </command>
+    <command id='no bts-jitter-buffer'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='bts-jitter-buffer' doc='Uplink Jitter Buffer' />
+      </params>
+    </command>
+    <command id='bts-jitter-buffer-delay-min <1-65535>'>
+      <params>
+        <param name='bts-jitter-buffer-delay-min' doc='Uplink Jitter Buffer Minimum Delay in ms' />
+        <param name='<1-65535>' doc='Minimum Delay in ms' />
+      </params>
+    </command>
+    <command id='bts-jitter-buffer-delay-max <1-65535>'>
+      <params>
+        <param name='bts-jitter-buffer-delay-max' doc='Uplink Jitter Buffer Maximum Delay in ms' />
+        <param name='<1-65535>' doc='Maximum Delay in ms' />
+      </params>
+    </command>
+    <command id='trunk <1-64>'>
+      <params>
+        <param name='trunk' doc='Configure a SS7 trunk' />
+        <param name='<1-64>' doc='Trunk Nr' />
+      </params>
+    </command>
+  </node>
+  <node id='config-nat'>
+    <name>config-nat</name>
+    <command id='msc ip A.B.C.D'>
+      <params>
+        <param name='msc' doc='MSC related configuration' />
+        <param name='ip' doc='Configure the IP address' />
+        <param name='A.B.C.D' doc='IP information' />
+      </params>
+    </command>
+    <command id='msc port <1-65500>'>
+      <params>
+        <param name='msc' doc='MSC related configuration' />
+        <param name='port' doc='Configure the port' />
+        <param name='<1-65500>' doc='Port number' />
+      </params>
+    </command>
+    <command id='timeout auth <1-256>'>
+      <params>
+        <param name='timeout' doc='Timeout configuration' />
+        <param name='auth' doc='Authentication timeout' />
+        <param name='<1-256>' doc='Timeout in seconds' />
+      </params>
+    </command>
+    <command id='timeout ping NR'>
+      <params>
+        <param name='timeout' doc='Timeout configuration' />
+        <param name='ping' doc='Time between two pings' />
+        <param name='NR' doc='Timeout in seconds' />
+      </params>
+    </command>
+    <command id='timeout pong NR'>
+      <params>
+        <param name='timeout' doc='Timeout configuration' />
+        <param name='pong' doc='Waiting for pong timeout' />
+        <param name='NR' doc='Timeout in seconds' />
+      </params>
+    </command>
+    <command id='token TOKEN'>
+      <params>
+        <param name='token' doc='Authentication token configuration' />
+        <param name='TOKEN' doc='Token of the BSC, currently transferred in cleartext' />
+      </params>
+    </command>
+    <command id='ip-dscp <0-255>'>
+      <params>
+        <param name='ip-dscp' doc='Set the IP DSCP for the BSCs to use' />
+        <param name='<0-255>' doc='Set the IP_TOS attribute' />
+      </params>
+    </command>
+    <command id='access-list-name NAME'>
+      <params>
+        <param name='access-list-name' doc='Set the name of the access list to use.' />
+        <param name='NAME' doc='The name of the to be used access list.' />
+      </params>
+    </command>
+    <command id='no access-list-name'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='access-list-name' doc='Remove the access list from the NAT.' />
+      </params>
+    </command>
+    <command id='bscs-config-file NAME'>
+      <params>
+        <param name='bscs-config-file' doc='Set the filename of the BSC configuration to include.' />
+        <param name='NAME' doc='The filename to be included.' />
+      </params>
+    </command>
+    <command id='imsi-black-list-file-name NAME'>
+      <params>
+        <param name='imsi-black-list-file-name' doc='IMSI black listing' />
+        <param name='NAME' doc='Filename IMSI and reject-cause' />
+      </params>
+    </command>
+    <command id='no imsi-black-list-file-name'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='imsi-black-list-file-name' doc='Remove the imsi-black-list' />
+      </params>
+    </command>
+    <command id='ussd-list-name NAME'>
+      <params>
+        <param name='ussd-list-name' doc='Set the name of the access list to check for IMSIs for USSD message' />
+        <param name='NAME' doc='The name of the access list for HLR USSD handling' />
+      </params>
+    </command>
+    <command id='ussd-query REGEXP'>
+      <params>
+        <param name='ussd-query' doc='Set the USSD query to match with the ussd-list-name' />
+        <param name='REGEXP' doc='The query to match' />
+      </params>
+    </command>
+    <command id='ussd-token TOKEN'>
+      <params>
+        <param name='ussd-token' doc='Set the token used to identify the USSD module' />
+        <param name='TOKEN' doc='Secret key' />
+      </params>
+    </command>
+    <command id='ussd-local-ip A.B.C.D'>
+      <params>
+        <param name='ussd-local-ip' doc='Set the IP to listen for the USSD Provider' />
+        <param name='A.B.C.D' doc='IP Address' />
+      </params>
+    </command>
+    <command id='use-msc-ipa-for-mgcp'>
+      <params>
+        <param name='use-msc-ipa-for-mgcp' doc='This needs to be set at start. Handle MGCP messages through the IPA protocol and not through the UDP socket.' />
+      </params>
+    </command>
+    <command id='access-list NAME imsi-allow [REGEXP]'>
+      <params>
+        <param name='access-list' doc='Access list commands' />
+        <param name='NAME' doc='Name of the access list' />
+        <param name='imsi-allow' doc='Add allowed IMSI to the list' />
+        <param name='[REGEXP]' doc='Regexp for IMSIs' />
+      </params>
+    </command>
+    <command id='access-list NAME imsi-deny [REGEXP] (<0-256>) (<0-256>)'>
+      <params>
+        <param name='access-list' doc='Access list commands' />
+        <param name='NAME' doc='Name of the access list' />
+        <param name='imsi-deny' doc='Add denied IMSI to the list' />
+        <param name='[REGEXP]' doc='Regexp for IMSIs' />
+        <param name='<0-256>' doc='CM Service Reject reason' />
+        <param name='<0-256>' doc='LU Reject reason' />
+      </params>
+    </command>
+    <command id='no access-list NAME'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='access-list' doc='Remove an access-list by name' />
+        <param name='NAME' doc='The access-list to remove' />
+      </params>
+    </command>
+    <command id='number-rewrite FILENAME'>
+      <params>
+        <param name='number-rewrite' doc='Set the file with rewriting rules.' />
+        <param name='FILENAME' doc='Filename' />
+      </params>
+    </command>
+    <command id='no number-rewrite'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='number-rewrite' doc='Set the file with rewriting rules.' />
+      </params>
+    </command>
+    <command id='number-rewrite-post FILENAME'>
+      <params>
+        <param name='number-rewrite-post' doc='Set the file with post-routing rewriting rules.' />
+        <param name='FILENAME' doc='Filename' />
+      </params>
+    </command>
+    <command id='no number-rewrite-post'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='number-rewrite-post' doc='Set the file with post-routing rewriting rules.' />
+      </params>
+    </command>
+    <command id='rewrite-smsc addr FILENAME'>
+      <params>
+        <param name='rewrite-smsc' doc='SMSC Rewriting' />
+        <param name='addr' doc='The SMSC Address to match and replace in RP-DATA' />
+        <param name='FILENAME' doc='File with rules for the SMSC Address replacing' />
+      </params>
+    </command>
+    <command id='rewrite-smsc tp-dest-match FILENAME'>
+      <params>
+        <param name='rewrite-smsc' doc='SMSC Rewriting' />
+        <param name='tp-dest-match' doc='Match TP-Destination of a SMS.' />
+        <param name='FILENAME' doc='File with rules for matching MSISDN and TP-DEST' />
+      </params>
+    </command>
+    <command id='sms-clear-tp-srr FILENAME'>
+      <params>
+        <param name='sms-clear-tp-srr' doc='SMS TPDU Sender Report Request clearing' />
+        <param name='FILENAME' doc='Files with rules for matching MSISDN' />
+      </params>
+    </command>
+    <command id='no sms-clear-tp-srr'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='sms-clear-tp-srr' doc='SMS TPDU Sender Report Request clearing' />
+      </params>
+    </command>
+    <command id='sms-number-rewrite FILENAME'>
+      <params>
+        <param name='sms-number-rewrite' doc='SMS TP-DA Number rewriting' />
+        <param name='FILENAME' doc='Files with rules for matching MSISDN' />
+      </params>
+    </command>
+    <command id='no sms-number-rewrite'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='sms-number-rewrite' doc='Disable SMS TP-DA rewriting' />
+      </params>
+    </command>
+    <command id='prefix-tree FILENAME'>
+      <params>
+        <param name='prefix-tree' doc='Prefix tree for number rewriting' />
+        <param name='FILENAME' doc='File to load' />
+      </params>
+    </command>
+    <command id='no prefix-tree'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='prefix-tree' doc='Prefix tree for number rewriting' />
+      </params>
+    </command>
+    <command id='sdp-ensure-amr-mode-set'>
+      <params>
+        <param name='sdp-ensure-amr-mode-set' doc='Ensure that SDP records include a mode-set' />
+      </params>
+    </command>
+    <command id='no sdp-ensure-amr-mode-set'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='sdp-ensure-amr-mode-set' doc='Ensure that SDP records include a mode-set' />
+      </params>
+    </command>
+    <command id='paging-bss-forward'>
+      <params>
+        <param name='paging-bss-forward' doc='Forward Paging messages with BSS as Cell Identity Discriminator' />
+      </params>
+    </command>
+    <command id='no paging-bss-forward'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='paging-bss-forward' doc='Forward Paging messages with BSS as Cell Identity Discriminator' />
+      </params>
+    </command>
+    <command id='paging-group <0-1000>'>
+      <params>
+        <param name='paging-group' doc='Create a Paging Group' />
+        <param name='<0-1000>' doc='Number of the Group' />
+      </params>
+    </command>
+    <command id='no paging-group <0-1000>'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='paging-group' doc='Delete paging-group' />
+        <param name='<0-1000>' doc='Paging-group number' />
+      </params>
+    </command>
+    <command id='bsc BSC_NR'>
+      <params>
+        <param name='bsc' doc='BSC configuration' />
+        <param name='BSC_NR' doc='Identifier of the BSC' />
+      </params>
+    </command>
+  </node>
+  <node id='config-nat-bsc'>
+    <name>config-nat-bsc</name>
+    <command id='token TOKEN'>
+      <params>
+        <param name='token' doc='Authentication token configuration' />
+        <param name='TOKEN' doc='Token of the BSC, currently transferred in cleartext' />
+      </params>
+    </command>
+    <command id='auth-key KEY'>
+      <params>
+        <param name='auth-key' doc='Authentication (secret) key configuration' />
+        <param name='KEY' doc='Non null security key' />
+      </params>
+    </command>
+    <command id='no auth-key'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='auth-key' doc='Authentication (secret) key configuration' />
+      </params>
+    </command>
+    <command id='location_area_code <0-65535>'>
+      <params>
+        <param name='location_area_code' doc='Add the Location Area Code (LAC) of this BSC' />
+        <param name='<0-65535>' doc='LAC' />
+      </params>
+    </command>
+    <command id='no location_area_code <0-65535>'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='location_area_code' doc='Remove the Location Area Code (LAC) of this BSC' />
+        <param name='<0-65535>' doc='LAC' />
+      </params>
+    </command>
+    <command id='paging forbidden (0|1)'>
+      <params>
+        <param name='paging' doc='Paging' />
+        <param name='forbidden' doc='Forbid sending PAGING REQUESTS to the BSC.' />
+        <param name='0' doc='Do not forbid' />
+        <param name='1' doc='Forbid' />
+      </params>
+    </command>
+    <command id='description DESC'>
+      <params>
+        <param name='description' doc='Provide a description for the given BSC.' />
+        <param name='DESC' doc='Description' />
+      </params>
+    </command>
+    <command id='access-list-name NAME'>
+      <params>
+        <param name='access-list-name' doc='Set the name of the access list to use.' />
+        <param name='NAME' doc='The name of the to be used access list.' />
+      </params>
+    </command>
+    <command id='no access-list-name'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='access-list-name' doc='Do not use an access-list for the BSC.' />
+      </params>
+    </command>
+    <command id='max-endpoints <1-1024>'>
+      <params>
+        <param name='max-endpoints' doc='Highest endpoint to use (exclusively)' />
+        <param name='<1-1024>' doc='Number of ports' />
+      </params>
+    </command>
+    <command id='paging group <0-1000>'>
+      <params>
+        <param name='paging' doc='Paging' />
+        <param name='group' doc='Use a paging group' />
+        <param name='<0-1000>' doc='Paging Group to use' />
+      </params>
+    </command>
+    <command id='no paging group'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='paging' doc='Paging' />
+        <param name='group' doc='Disable the usage of a paging group.' />
+      </params>
+    </command>
+    <command id='osmux (on|off|only)'>
+      <params>
+        <param name='osmux' doc='RTP multiplexing' />
+        <param name='on' doc='Enable OSMUX' />
+        <param name='off' doc='Disable OSMUX' />
+        <param name='only' doc='Only OSMUX' />
+      </params>
+    </command>
+    <command id='bts-jitter-buffer'>
+      <params>
+        <param name='bts-jitter-buffer' doc='Uplink Jitter Buffer' />
+      </params>
+    </command>
+    <command id='no bts-jitter-buffer'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='bts-jitter-buffer' doc='Uplink Jitter Buffer' />
+      </params>
+    </command>
+    <command id='bts-jitter-buffer-delay-min <1-65535>'>
+      <params>
+        <param name='bts-jitter-buffer-delay-min' doc='Uplink Jitter Buffer Minimum Delay in ms' />
+        <param name='<1-65535>' doc='Minimum Delay in ms' />
+      </params>
+    </command>
+    <command id='bts-jitter-buffer-delay-max <1-65535>'>
+      <params>
+        <param name='bts-jitter-buffer-delay-max' doc='Uplink Jitter Buffer Maximum Delay in ms' />
+        <param name='<1-65535>' doc='Maximum Delay in ms' />
+      </params>
+    </command>
+  </node>
+  <node id='config-mgcp-trunk'>
+    <name>config-mgcp-trunk</name>
+    <command id='rtp keep-alive <1-120>'>
+      <params>
+        <param name='rtp' doc='RTP configuration' />
+        <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' />
+        <param name='<1-120>' doc='Keep-alive interval in secs' />
+      </params>
+    </command>
+    <command id='rtp keep-alive once'>
+      <params>
+        <param name='rtp' doc='RTP configuration' />
+        <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' />
+        <param name='once' doc='Send dummy packet only once after CRCX/MDCX' />
+      </params>
+    </command>
+    <command id='no rtp keep-alive'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='rtp' doc='RTP configuration' />
+        <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' />
+      </params>
+    </command>
+    <command id='sdp audio-payload number <0-255>'>
+      <params>
+        <param name='sdp' doc='SDP File related options' />
+        <param name='audio-payload' doc='Audio payload options' />
+        <param name='number' doc='Number' />
+        <param name='<0-255>' doc='Payload Number' />
+      </params>
+    </command>
+    <command id='sdp audio-payload name NAME'>
+      <params>
+        <param name='sdp' doc='SDP File related options' />
+        <param name='audio-payload' doc='Audio payload options' />
+        <param name='name' doc='Payload' />
+        <param name='NAME' doc='Payload Name' />
+      </params>
+    </command>
+    <command id='loop (0|1)'>
+      <params>
+        <param name='loop' doc='Loop audio for all endpoints on this trunk' />
+        <param name='0' doc='Don't Loop' />
+        <param name='1' doc='Loop' />
+      </params>
+    </command>
+    <command id='rtcp-omit'>
+      <params>
+        <param name='rtcp-omit' doc='Drop RTCP packets in both directions' />
+      </params>
+    </command>
+    <command id='no rtcp-omit'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='rtcp-omit' doc='Drop RTCP packets in both directions' />
+      </params>
+    </command>
+    <command id='rtp-patch ssrc'>
+      <params>
+        <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
+        <param name='ssrc' doc='Force a fixed SSRC' />
+      </params>
+    </command>
+    <command id='no rtp-patch ssrc'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
+        <param name='ssrc' doc='Force a fixed SSRC' />
+      </params>
+    </command>
+    <command id='rtp-patch timestamp'>
+      <params>
+        <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
+        <param name='timestamp' doc='Adjust RTP timestamp' />
+      </params>
+    </command>
+    <command id='no rtp-patch timestamp'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
+        <param name='timestamp' doc='Adjust RTP timestamp' />
+      </params>
+    </command>
+    <command id='no rtp-patch'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
+      </params>
+    </command>
+    <command id='sdp audio fmtp-extra .NAME'>
+      <params>
+        <param name='sdp' doc='Add extra fmtp for the SDP file' />
+        <param name='audio' doc='Audio' />
+        <param name='fmtp-extra' doc='Fmtp-extra' />
+        <param name='.NAME' doc='Extra Information' />
+      </params>
+    </command>
+    <command id='sdp audio-payload send-ptime'>
+      <params>
+        <param name='sdp' doc='SDP File related options' />
+        <param name='audio-payload' doc='Audio payload options' />
+        <param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' />
+      </params>
+    </command>
+    <command id='no sdp audio-payload send-ptime'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='sdp' doc='SDP File related options' />
+        <param name='audio-payload' doc='Audio payload options' />
+        <param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' />
+      </params>
+    </command>
+    <command id='sdp audio-payload send-name'>
+      <params>
+        <param name='sdp' doc='SDP File related options' />
+        <param name='audio-payload' doc='Audio payload options' />
+        <param name='send-name' doc='Send SDP rtpmap with the audio name' />
+      </params>
+    </command>
+    <command id='no sdp audio-payload send-name'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='sdp' doc='SDP File related options' />
+        <param name='audio-payload' doc='Audio payload options' />
+        <param name='send-name' doc='Send SDP rtpmap with the audio name' />
+      </params>
+    </command>
+    <command id='allow-transcoding'>
+      <params>
+        <param name='allow-transcoding' doc='Allow transcoding' />
+      </params>
+    </command>
+    <command id='no allow-transcoding'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='allow-transcoding' doc='Allow transcoding' />
+      </params>
+    </command>
+  </node>
+  <node id='config-nat-paging-group'>
+    <name>config-nat-paging-group</name>
+    <command id='location_area_code <0-65535>'>
+      <params>
+        <param name='location_area_code' doc='Add the Location Area Code (LAC)' />
+        <param name='<0-65535>' doc='LAC' />
+      </params>
+    </command>
+    <command id='no location_area_code <0-65535>'>
+      <params>
+        <param name='no' doc='Negate a command or set its defaults' />
+        <param name='location_area_code' doc='Remove the Location Area Code (LAC)' />
+        <param name='<0-65535>' doc='LAC' />
+      </params>
+    </command>
+  </node>
+</vtydoc>
diff --git a/openbsc/doc/regen_doc.sh b/openbsc/doc/regen_doc.sh
index 5552dec..12bb878 100755
--- a/openbsc/doc/regen_doc.sh
+++ b/openbsc/doc/regen_doc.sh
@@ -16,6 +16,7 @@
 	"$MANUAL_DIR/OsmoNITB/chapters/counters_generated.adoc" \
 	"$MANUAL_DIR/OsmoNITB/vty/nitb_vty_reference.xml"
 
-#OSMO_BSCNAT_BRANCH=$COMMIT ./regen_doc.sh osmo-bscnat 4244 \
-#	"$MANUAL_DIR/OsmoBSCNAT/chapters/counters_generated.adoc" \
-#	"$MANUAL_DIR/OsmoBSCNAT/vty/nat_vty_reference.xml"
+OSMO_BSCNAT_BRANCH=$COMMIT ./regen_doc.sh osmo-nitb 4244 \
+	"$MANUAL_DIR/OsmoBSCNAT/chapters/counters_generated.adoc" \
+	"$MANUAL_DIR/OsmoBSCNAT/vty/nat_vty_reference.xml" \
+	"osmo-bsc_nat -c /data/osmo-bsc-nat.cfg"

-- 
To view, visit https://gerrit.osmocom.org/c/openbsc/+/14530
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings

Gerrit-Project: openbsc
Gerrit-Branch: master
Gerrit-Change-Id: Ice7f15192a57e2c964d07d364732af888972ba0f
Gerrit-Change-Number: 14530
Gerrit-PatchSet: 1
Gerrit-Owner: daniel <dwillmann at sysmocom.de>
Gerrit-MessageType: newchange
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20190619/a5bc5fcc/attachment.htm>


More information about the gerrit-log mailing list