This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
roox gerrit-no-reply at lists.osmocom.orgroox has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-bts/+/14821
Change subject: Fix common misspellings and typos
......................................................................
Fix common misspellings and typos
Change-Id: I00ebf013104b55decbdd7f758756a19b220dc7b3
---
M README.md
M debian/changelog
M doc/manuals/rtp-amr.adoc
M doc/manuals/vty/bts_vty_reference.xml
M src/common/l1sap.c
M src/osmo-bts-litecell15/misc/lc15bts_mgr_calib.c
M src/osmo-bts-litecell15/misc/lc15bts_mgr_vty.c
M src/osmo-bts-oc2g/misc/oc2gbts_mgr_calib.c
M src/osmo-bts-oc2g/misc/oc2gbts_mgr_vty.c
M src/osmo-bts-octphy/l1_oml.c
M src/osmo-bts-sysmo/misc/sysmobts-layer1.c
M src/osmo-bts-sysmo/misc/sysmobts_mgr_calib.c
M src/osmo-bts-sysmo/misc/sysmobts_mgr_vty.c
M tests/meas/meas_test.c
14 files changed, 118 insertions(+), 118 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-bts refs/changes/21/14821/1
diff --git a/README.md b/README.md
index 7e26d82..1fca596 100644
--- a/README.md
+++ b/README.md
@@ -45,7 +45,7 @@
as well as a
[VTY Reference Manual](http://ftp.osmocom.org/docs/latest/osmobsc-vty-reference.pdf)
and a
-[Abis refrence MAnual](http://ftp.osmocom.org/docs/latest/osmobts-abis.pdf)
+[Abis reference MAnual](http://ftp.osmocom.org/docs/latest/osmobts-abis.pdf)
describing the OsmoBTS specific A-bis dialect.
Mailing List
diff --git a/debian/changelog b/debian/changelog
index a33d21f..0dce96c 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -133,7 +133,7 @@
* bts_model: Allow TS connect to be processed asynchronously
* OsmoBTS/chapters/configuration.adoc: Add bts index in example
* OsmoBTS: Update osmotrx ip to diff between local and remote
- * rtp-amr: Describe requirement to recieve all PH-DATA.ind events
+ * rtp-amr: Describe requirement to receive all PH-DATA.ind events
* rtp-amr: Fix typo and trailing whitespace
* Allow easily disabling GFDL references
* OsmoBTS: bts-models: Add Lime Microsystems devices as supported osmo-trx
@@ -341,7 +341,7 @@
* RSL: Implement DELETE INDICATION on AGCH overflow
* RSL: Send ERROR REPORT on too short/truncated messages + wrong discriminator
* BTS: add rate_ctr about CCCH (paging, agch, pch)
- * paging: Drop + Log paging requests for non-existant paging groups
+ * paging: Drop + Log paging requests for non-existent paging groups
* paging.c: Fix encoding of optional Mobile ID RR PAGING TYPE 1 / 2
* rsl: Improve ERROR REPORTing
* paging: Fix encoding of PAGING TYPE 3 Rest Octets
@@ -601,7 +601,7 @@
* Add Abis OML failure event reporting
* Alarm on various errors
* Remove obsolete define TLVP_PRES_LEN
- * scheduler: log lchan on which prim error occured
+ * scheduler: log lchan on which prim error occurred
* deb: use gsm_data_shared.* from openbsc-dev
* OML: internalize failure reporting
* Add ctrl command to send OML alert
diff --git a/doc/manuals/rtp-amr.adoc b/doc/manuals/rtp-amr.adoc
index 5a36aea..0c733d1 100644
--- a/doc/manuals/rtp-amr.adoc
+++ b/doc/manuals/rtp-amr.adoc
@@ -95,10 +95,10 @@
phy => bts [label="PH-DATA.ind GsmL1_TchPlType_Amr (SID_FIRST)"];
bts => mgw [label="RTP (AMR FT=SID,Q=1)"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
phy => bts [label="PH-DATA.ind with empty payload"];
bts -x mgw [label="Suppressed RTP frame"];
@@ -110,10 +110,10 @@
bts -x mgw [label="Suppressed RTP frame"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
phy => bts [label="PH-DATA.ind GsmL1_TchPlType_Amr (SID_UPDATE)"];
bts => mgw [label="RTP (AMR FT=SID,Q=1)"];
}
@@ -123,7 +123,7 @@
the SID_FIRST frame is immediately followed by a speech frame. It has been observed that some phone
does not transmit the last 4 bursts even if it is not followed by a speech frame.
-ULSU2:: There must be exactly two supressed voice frames between the
+ULSU2:: There must be exactly two suppressed voice frames between the
SID_FIRST and the SID_UPDATE, i.e. there's 60ms between SID_FIRST and
SID_UPDATE.
@@ -152,52 +152,52 @@
phy => bts [label="PH-DATA.ind with empty payload"];
bts -x mgw [label="Suppressed RTP frame"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
phy => bts [label="PH-DATA.ind GsmL1_TchPlType_Amr (SID_UPDATE)"];
bts => mgw [label="RTP (AMR FT=SID,Q=1)"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
phy => bts [label="PH-DATA.ind with empty payload"];
bts -x mgw [label="Suppressed RTP frame"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
phy => bts [label="PH-DATA.ind with empty payload"];
bts -x mgw [label="Suppressed RTP frame"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
phy => bts [label="PH-DATA.ind with empty payload"];
bts -x mgw [label="Suppressed RTP frame"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
phy => bts [label="PH-DATA.ind with empty payload"];
bts -x mgw [label="Suppressed RTP frame"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
phy => bts [label="PH-DATA.ind with empty payload"];
bts -x mgw [label="Suppressed RTP frame"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
phy => bts [label="PH-DATA.ind with empty payload"];
bts -x mgw [label="Suppressed RTP frame"];
@@ -208,10 +208,10 @@
phy => bts [label="PH-DATA.ind with empty payload"];
bts -x mgw [label="Suppressed RTP frame"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
phy => bts [label="PH-DATA.ind GsmL1_TchPlType_Amr (SID_UPDATE)"];
bts => mgw [label="RTP (AMR FT=SID,Q=1)"];
}
@@ -254,10 +254,10 @@
...;
--- [label="Once voice is active again"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
phy => bts [label="PH-DATA.ind with empty payload"];
bts -x mgw [label="Suppressed RTP frame"];
@@ -345,10 +345,10 @@
...;
--- [label="FACCH/F Frame During DTX"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
phy => bts [label="PH-DATA.ind with empty payload"];
bts -x mgw [label="Suppressed RTP frame"];
@@ -368,10 +368,10 @@
phy => bts [label="PH-DATA.ind FACCH/F"];
bts => mgw [label="FACCH/F"];
- ms -x phy [label="Supressed L1 burst", id="ULSF2"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst", id="ULSF2"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
phy => bts [label="PH-DATA.ind GsmL1_TchPlType_Amr (SID_FIRST)"];
bts => mgw [label="RTP (AMR FT=SID,Q=1)"];
...;
@@ -660,10 +660,10 @@
phy => bts [label="PH-RTS.ind (TCH)"];
phy <= bts [label="PH-EMPTY-FRAME.req (FACCH/F)"];
phy <= bts [label="PH-EMPTY-FRAME.req (TCH/F)"];
- ms x- phy [label="Supressed burst"];
- ms x- phy [label="Supressed burst"];
- ms x- phy [label="Supressed burst"];
- ms x- phy [label="Supressed burst"];
+ ms x- phy [label="Suppressed burst"];
+ ms x- phy [label="Suppressed burst"];
+ ms x- phy [label="Suppressed burst"];
+ ms x- phy [label="Suppressed burst"];
}
----
@@ -738,8 +738,8 @@
phy => bts [label="PH-DATA.ind GsmL1_TchPlType_Amr (N)"];
bts => mgw [label="RTP (AMR FT=0..7,Q=1)"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
phy => bts [label="PH-DATA.ind GsmL1_TchPlType_Amr_SidFirstP1", id="ULSF1"];
bts => mgw [label="RTP (AMR FT=SID,Q=1)"];
@@ -753,8 +753,8 @@
phy => bts [label="PH-DATA.ind with empty payload"];
bts -x mgw [label="Suppressed RTP frame"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
phy => bts [label="PH-DATA.ind GsmL1_TchPlType_Amr (SID_UPDATE)"];
bts => mgw [label="RTP (AMR FT=SID,Q=1)"];
}
@@ -764,7 +764,7 @@
NOTE:: It has been observed that not all phones transmit SID_FIRST_P2 so the PH-DATA.ind GsmL1_TchPlType_Amr_SidFirstP2 is not guaranteed to be sent to the BTS.
-ULSU1:: There must be exactly two supressed voice frames between the
+ULSU1:: There must be exactly two suppressed voice frames between the
SID_FIRST and the SID_UPDATE, i.e. there's 60ms between SID_FIRST and
SID_UPDATE.
@@ -795,33 +795,33 @@
phy => bts [label="PH-DATA.ind with empty payload"];
bts -x mgw [label="Suppressed RTP frame"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
phy => bts [label="PH-DATA.ind GsmL1_TchPlType_Amr (SID_UPDATE)"];
bts => mgw [label="RTP (AMR FT=SID,Q=1)"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
phy => bts [label="PH-DATA.ind with empty payload"];
bts -x mgw [label="Suppressed RTP frame"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
phy => bts [label="PH-DATA.ind with empty payload"];
bts -x mgw [label="Suppressed RTP frame"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
phy => bts [label="PH-DATA.ind with empty payload"];
bts -x mgw [label="Suppressed RTP frame"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
phy => bts [label="PH-DATA.ind with empty payload"];
bts -x mgw [label="Suppressed RTP frame"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
phy => bts [label="PH-DATA.ind with empty payload"];
bts -x mgw [label="Suppressed RTP frame"];
@@ -834,8 +834,8 @@
phy => bts [label="PH-DATA.ind with empty payload"];
bts -x mgw [label="Suppressed RTP frame"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
phy => bts [label="PH-DATA.ind GsmL1_TchPlType_Amr (SID_UPDATE)"];
bts => mgw [label="RTP (AMR FT=SID,Q=1)"];
}
@@ -910,7 +910,7 @@
been transmitted yet, SID_FIRST can be inhibited by means of a
SID_FIRST_INH frame. This allows the first voice frame to be
transmitted with minimal delay, compared to first completing
-the regular SID_FIRTS_P2 and SID_ONSET procedure.
+the regular SID_FIRST_P2 and SID_ONSET procedure.
["mscgen"]
----
@@ -999,8 +999,8 @@
...;
ms .. mgw [label="FACCH/H during DTX operation"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
phy => bts [label="PH-DATA.ind with empty payload"];
bts -x mgw [label="Suppressed RTP frame"];
@@ -1026,8 +1026,8 @@
phy => bts [label="PH-DATA.ind with empty payload"];
bts -x mgw [label="Suppressed RTP frame"];
- ms -x phy [label="Supressed L1 burst"];
- ms -x phy [label="Supressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
+ ms -x phy [label="Suppressed L1 burst"];
phy => bts [label="PH-DATA.ind GsmL1_TchPlType_Amr_SidFirstP1"];
bts => mgw [label="RTP (AMR FT=SID,Q=1)"];
}
diff --git a/doc/manuals/vty/bts_vty_reference.xml b/doc/manuals/vty/bts_vty_reference.xml
index b50ac1b..c2035dd 100644
--- a/doc/manuals/vty/bts_vty_reference.xml
+++ b/doc/manuals/vty/bts_vty_reference.xml
@@ -173,7 +173,7 @@
<param name='everything' doc='Don't use. It doesn't log anything' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
- <param name='notice' doc='Log noticable messages and higher levels' />
+ <param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
</params>
@@ -542,7 +542,7 @@
<param name='everything' doc='Don't use. It doesn't log anything' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
- <param name='notice' doc='Log noticable messages and higher levels' />
+ <param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
</params>
@@ -1113,7 +1113,7 @@
<param name='everything' doc='Don't use. It doesn't log anything' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels' />
- <param name='notice' doc='Log noticable messages and higher levels' />
+ <param name='notice' doc='Log noticeable messages and higher levels' />
<param name='error' doc='Log error messages and higher levels' />
<param name='fatal' doc='Log only fatal messages' />
</params>
diff --git a/src/common/l1sap.c b/src/common/l1sap.c
index b730b85..389f4cf 100644
--- a/src/common/l1sap.c
+++ b/src/common/l1sap.c
@@ -160,7 +160,7 @@
}
/* allocate a msgb containing a osmo_phsap_prim + optional l2 data
- * in order to wrap femtobts header arround l2 data, there must be enough space
+ * in order to wrap femtobts header around l2 data, there must be enough space
* in front and behind data pointer */
struct msgb *l1sap_msgb_alloc(unsigned int l2_len)
{
@@ -715,7 +715,7 @@
int is_ccch_for_agch(struct gsm_bts_trx *trx, uint32_t fn) {
/* Note: The number of available access grant channels is set by the
* parameter BS_AG_BLKS_RES via system information type 3. This SI is
- * transfered to osmo-bts via RSL */
+ * transferred to osmo-bts via RSL */
return l1sap_fn2ccch_block(fn) < num_agch(trx, "PH-RTS-IND");
}
diff --git a/src/osmo-bts-litecell15/misc/lc15bts_mgr_calib.c b/src/osmo-bts-litecell15/misc/lc15bts_mgr_calib.c
index badb545..903c5cd 100644
--- a/src/osmo-bts-litecell15/misc/lc15bts_mgr_calib.c
+++ b/src/osmo-bts-litecell15/misc/lc15bts_mgr_calib.c
@@ -233,7 +233,7 @@
*/
int timeout = 60;
//int timeout = 2 * 60 * 60;
- //if (outcome != CALIB_SUCESS) }
+ //if (outcome != CALIB_SUCCESS) }
// timeout = 5 * 60;
//}
diff --git a/src/osmo-bts-litecell15/misc/lc15bts_mgr_vty.c b/src/osmo-bts-litecell15/misc/lc15bts_mgr_vty.c
index 80751fb..424ff18 100644
--- a/src/osmo-bts-litecell15/misc/lc15bts_mgr_vty.c
+++ b/src/osmo-bts-litecell15/misc/lc15bts_mgr_vty.c
@@ -584,39 +584,39 @@
lc15bts_mgr_sensor_get_state(s_mgr->state.state), VTY_NEWLINE);
vty_out(vty, "Current Temperatures%s", VTY_NEWLINE);
lc15bts_temp_get(LC15BTS_TEMP_SUPPLY, &temp);
- vty_out(vty, " Main Supply : %4.2f Celcius%s",
+ vty_out(vty, " Main Supply : %4.2f Celsius%s",
temp/ 1000.0f,
VTY_NEWLINE);
lc15bts_temp_get(LC15BTS_TEMP_SOC, &temp);
- vty_out(vty, " SoC : %4.2f Celcius%s",
+ vty_out(vty, " SoC : %4.2f Celsius%s",
temp / 1000.0f,
VTY_NEWLINE);
lc15bts_temp_get(LC15BTS_TEMP_FPGA, &temp);
- vty_out(vty, " FPGA : %4.2f Celcius%s",
+ vty_out(vty, " FPGA : %4.2f Celsius%s",
temp / 1000.0f,
VTY_NEWLINE);
lc15bts_temp_get(LC15BTS_TEMP_RMSDET, &temp);
- vty_out(vty, " RMSDet : %4.2f Celcius%s",
+ vty_out(vty, " RMSDet : %4.2f Celsius%s",
temp / 1000.0f,
VTY_NEWLINE);
lc15bts_temp_get(LC15BTS_TEMP_OCXO, &temp);
- vty_out(vty, " OCXO : %4.2f Celcius%s",
+ vty_out(vty, " OCXO : %4.2f Celsius%s",
temp / 1000.0f,
VTY_NEWLINE);
lc15bts_temp_get(LC15BTS_TEMP_TX0, &temp);
- vty_out(vty, " TX 0 : %4.2f Celcius%s",
+ vty_out(vty, " TX 0 : %4.2f Celsius%s",
temp / 1000.0f,
VTY_NEWLINE);
lc15bts_temp_get(LC15BTS_TEMP_TX1, &temp);
- vty_out(vty, " TX 1 : %4.2f Celcius%s",
+ vty_out(vty, " TX 1 : %4.2f Celsius%s",
temp / 1000.0f,
VTY_NEWLINE);
lc15bts_temp_get(LC15BTS_TEMP_PA0, &temp);
- vty_out(vty, " Power Amp #0: %4.2f Celcius%s",
+ vty_out(vty, " Power Amp #0: %4.2f Celsius%s",
temp / 1000.0f,
VTY_NEWLINE);
lc15bts_temp_get(LC15BTS_TEMP_PA1, &temp);
- vty_out(vty, " Power Amp #1: %4.2f Celcius%s",
+ vty_out(vty, " Power Amp #1: %4.2f Celsius%s",
temp / 1000.0f,
VTY_NEWLINE);
diff --git a/src/osmo-bts-oc2g/misc/oc2gbts_mgr_calib.c b/src/osmo-bts-oc2g/misc/oc2gbts_mgr_calib.c
index 3ddf0e8..5775065 100644
--- a/src/osmo-bts-oc2g/misc/oc2gbts_mgr_calib.c
+++ b/src/osmo-bts-oc2g/misc/oc2gbts_mgr_calib.c
@@ -518,7 +518,7 @@
*/
int timeout = 60;
//int timeout = 2 * 60 * 60;
- //if (outcome != CALIB_SUCESS) }
+ //if (outcome != CALIB_SUCCESS) }
// timeout = 5 * 60;
//}
diff --git a/src/osmo-bts-oc2g/misc/oc2gbts_mgr_vty.c b/src/osmo-bts-oc2g/misc/oc2gbts_mgr_vty.c
index 7e80e03..9693eab 100644
--- a/src/osmo-bts-oc2g/misc/oc2gbts_mgr_vty.c
+++ b/src/osmo-bts-oc2g/misc/oc2gbts_mgr_vty.c
@@ -512,35 +512,35 @@
oc2gbts_mgr_sensor_get_state(s_mgr->state.state), VTY_NEWLINE);
vty_out(vty, "Current Temperatures%s", VTY_NEWLINE);
oc2gbts_temp_get(OC2GBTS_TEMP_SUPPLY, &temp);
- vty_out(vty, " Main Supply : %4.2f Celcius%s",
+ vty_out(vty, " Main Supply : %4.2f Celsius%s",
temp/ 1000.0f,
VTY_NEWLINE);
oc2gbts_temp_get(OC2GBTS_TEMP_SOC, &temp);
- vty_out(vty, " SoC : %4.2f Celcius%s",
+ vty_out(vty, " SoC : %4.2f Celsius%s",
temp / 1000.0f,
VTY_NEWLINE);
oc2gbts_temp_get(OC2GBTS_TEMP_FPGA, &temp);
- vty_out(vty, " FPGA : %4.2f Celcius%s",
+ vty_out(vty, " FPGA : %4.2f Celsius%s",
temp / 1000.0f,
VTY_NEWLINE);
if (oc2gbts_option_get(OC2GBTS_OPTION_RMS_FWD) ||
oc2gbts_option_get(OC2GBTS_OPTION_RMS_REFL)) {
oc2gbts_temp_get(OC2GBTS_TEMP_RMSDET, &temp);
- vty_out(vty, " RMSDet : %4.2f Celcius%s",
+ vty_out(vty, " RMSDet : %4.2f Celsius%s",
temp / 1000.0f,
VTY_NEWLINE);
}
oc2gbts_temp_get(OC2GBTS_TEMP_OCXO, &temp);
- vty_out(vty, " OCXO : %4.2f Celcius%s",
+ vty_out(vty, " OCXO : %4.2f Celsius%s",
temp / 1000.0f,
VTY_NEWLINE);
oc2gbts_temp_get(OC2GBTS_TEMP_TX, &temp);
- vty_out(vty, " TX : %4.2f Celcius%s",
+ vty_out(vty, " TX : %4.2f Celsius%s",
temp / 1000.0f,
VTY_NEWLINE);
if (oc2gbts_option_get(OC2GBTS_OPTION_PA_TEMP)) {
oc2gbts_temp_get(OC2GBTS_TEMP_PA, &temp);
- vty_out(vty, " Power Amp : %4.2f Celcius%s",
+ vty_out(vty, " Power Amp : %4.2f Celsius%s",
temp / 1000.0f,
VTY_NEWLINE);
}
diff --git a/src/osmo-bts-octphy/l1_oml.c b/src/osmo-bts-octphy/l1_oml.c
index d44f721..d306c11 100644
--- a/src/osmo-bts-octphy/l1_oml.c
+++ b/src/osmo-bts-octphy/l1_oml.c
@@ -506,7 +506,7 @@
* sub-channel, only th request contains this information :( */
lchan = &ts->lchan[(unsigned long) data];
- /* TODO: This state machine should be shared accross BTS models? */
+ /* TODO: This state machine should be shared across BTS models? */
switch (lchan->ciph_state) {
case LCHAN_CIPH_RX_REQ:
lchan->ciph_state = LCHAN_CIPH_RX_CONF;
diff --git a/src/osmo-bts-sysmo/misc/sysmobts-layer1.c b/src/osmo-bts-sysmo/misc/sysmobts-layer1.c
index 4b34f50..20ca6f5 100644
--- a/src/osmo-bts-sysmo/misc/sysmobts-layer1.c
+++ b/src/osmo-bts-sysmo/misc/sysmobts-layer1.c
@@ -622,7 +622,7 @@
return -1;
}
if (prim.u.rfClockSetupCnf.status != GsmL1_Status_Success) {
- printf("Clock setup was not successfull.\n");
+ printf("Clock setup was not successful.\n");
return -2;
}
diff --git a/src/osmo-bts-sysmo/misc/sysmobts_mgr_calib.c b/src/osmo-bts-sysmo/misc/sysmobts_mgr_calib.c
index a0ba649..d769ce7 100644
--- a/src/osmo-bts-sysmo/misc/sysmobts_mgr_calib.c
+++ b/src/osmo-bts-sysmo/misc/sysmobts_mgr_calib.c
@@ -54,7 +54,7 @@
CALIB_FAIL_START,
CALIB_FAIL_GPS,
CALIB_FAIL_CTRL,
- CALIB_SUCESS,
+ CALIB_SUCCESS,
};
static inline int compat_gps_read(struct gps_data_t *data)
@@ -271,7 +271,7 @@
* and in case of a failure in some minutes.
*/
int timeout = 2 * 60 * 60;
- if (outcome != CALIB_SUCESS)
+ if (outcome != CALIB_SUCCESS)
timeout = 5 * 60;
mgr->calib.calib_timeout.data = mgr;
@@ -390,7 +390,7 @@
LOGP(DCALIB, LOGL_NOTICE,
"Calibration process completed\n");
- calib_state_reset(mgr, CALIB_SUCESS);
+ calib_state_reset(mgr, CALIB_SUCCESS);
}
static void handle_ctrl(struct sysmobts_mgr_instance *mgr, struct msgb *msg)
diff --git a/src/osmo-bts-sysmo/misc/sysmobts_mgr_vty.c b/src/osmo-bts-sysmo/misc/sysmobts_mgr_vty.c
index 444ee7c..fb3987b 100644
--- a/src/osmo-bts-sysmo/misc/sysmobts_mgr_vty.c
+++ b/src/osmo-bts-sysmo/misc/sysmobts_mgr_vty.c
@@ -380,11 +380,11 @@
vty_out(vty, "Temperature control state: %s%s",
sysmobts_mgr_temp_get_state(s_mgr->state), VTY_NEWLINE);
vty_out(vty, "Current Temperatures%s", VTY_NEWLINE);
- vty_out(vty, " Digital: %f Celcius%s",
+ vty_out(vty, " Digital: %f Celsius%s",
sysmobts_temp_get(SYSMOBTS_TEMP_DIGITAL,
SYSMOBTS_TEMP_INPUT) / 1000.0f,
VTY_NEWLINE);
- vty_out(vty, " RF: %f Celcius%s",
+ vty_out(vty, " RF: %f Celsius%s",
sysmobts_temp_get(SYSMOBTS_TEMP_RF,
SYSMOBTS_TEMP_INPUT) / 1000.0f,
VTY_NEWLINE);
@@ -396,8 +396,8 @@
is_sbts2050_master() ? "master" : "slave", VTY_NEWLINE);
sbts2050_uc_check_temp(&temp_pa, &temp_board);
- vty_out(vty, " sysmoBTS 2050 PA: %d Celcius%s", temp_pa, VTY_NEWLINE);
- vty_out(vty, " sysmoBTS 2050 PA: %d Celcius%s", temp_board, VTY_NEWLINE);
+ vty_out(vty, " sysmoBTS 2050 PA: %d Celsius%s", temp_pa, VTY_NEWLINE);
+ vty_out(vty, " sysmoBTS 2050 PA: %d Celsius%s", temp_board, VTY_NEWLINE);
sbts2050_uc_get_status(&status);
vty_out(vty, "Power Status%s", VTY_NEWLINE);
diff --git a/tests/meas/meas_test.c b/tests/meas/meas_test.c
index b2bf80e..c8f06b6 100644
--- a/tests/meas/meas_test.c
+++ b/tests/meas/meas_test.c
@@ -306,7 +306,7 @@
* received. The process must still go on when measurement indications (blocks)
* are lost or otherwise spaced out. Even the complete absence of the
* measurement indications from the SACCH which are used to detect the interval
- * end must not keep the interval from beeing processed. */
+ * end must not keep the interval from being processed. */
void test_lchan_meas_process_measurement(bool no_sacch, bool dropouts)
{
struct gsm_lchan *lchan = &trx->ts[2].lchan[0];
--
To view, visit https://gerrit.osmocom.org/c/osmo-bts/+/14821
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-bts
Gerrit-Branch: master
Gerrit-Change-Id: I00ebf013104b55decbdd7f758756a19b220dc7b3
Gerrit-Change-Number: 14821
Gerrit-PatchSet: 1
Gerrit-Owner: roox <mardnh at gmx.de>
Gerrit-MessageType: newchange
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20190717/2fd8fe0a/attachment.htm>