This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Harald Welte gerrit-no-reply at lists.osmocom.orgHarald Welte has submitted this change and it was merged. ( https://gerrit.osmocom.org/12650 )
Change subject: Bump version: 0.8.1.199-5c93-dirty → 1.0.0
......................................................................
Bump version: 0.8.1.199-5c93-dirty → 1.0.0
Change-Id: Ie33252aef4144f9bb825d7c234970fd4e6083bb2
---
M configure.ac
M debian/changelog
2 files changed, 242 insertions(+), 8 deletions(-)
Approvals:
Harald Welte: Looks good to me, approved
Jenkins Builder: Verified
diff --git a/configure.ac b/configure.ac
index e3fefea..15c4259 100644
--- a/configure.ac
+++ b/configure.ac
@@ -62,14 +62,14 @@
fi
dnl checks for libraries
-PKG_CHECK_MODULES(LIBOSMOCORE, libosmocore >= 0.12.0)
-PKG_CHECK_MODULES(LIBOSMOVTY, libosmovty >= 0.12.0)
-PKG_CHECK_MODULES(LIBOSMOGSM, libosmogsm >= 0.12.0)
-PKG_CHECK_MODULES(LIBOSMOCTRL, libosmoctrl >= 0.12.0)
-PKG_CHECK_MODULES(LIBOSMOCODEC, libosmocodec >= 0.12.0)
-PKG_CHECK_MODULES(LIBOSMOCODING, libosmocoding >= 0.12.0)
-PKG_CHECK_MODULES(LIBOSMOABIS, libosmoabis >= 0.5.0)
-PKG_CHECK_MODULES(LIBOSMOTRAU, libosmotrau >= 0.5.0)
+PKG_CHECK_MODULES(LIBOSMOCORE, libosmocore >= 1.0.0)
+PKG_CHECK_MODULES(LIBOSMOVTY, libosmovty >= 1.0.0)
+PKG_CHECK_MODULES(LIBOSMOGSM, libosmogsm >= 1.0.0)
+PKG_CHECK_MODULES(LIBOSMOCTRL, libosmoctrl >= 1.0.0)
+PKG_CHECK_MODULES(LIBOSMOCODEC, libosmocodec >= 1.0.0)
+PKG_CHECK_MODULES(LIBOSMOCODING, libosmocoding >= 1.0.0)
+PKG_CHECK_MODULES(LIBOSMOABIS, libosmoabis >= 0.6.0)
+PKG_CHECK_MODULES(LIBOSMOTRAU, libosmotrau >= 0.6.0)
AC_MSG_CHECKING([whether to enable support for sysmobts calibration tool])
AC_ARG_ENABLE(sysmobts-calib,
diff --git a/debian/changelog b/debian/changelog
index 09e2a83..a33d21f 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,3 +1,237 @@
+osmo-bts (1.0.0) unstable; urgency=medium
+
+ [ Stefan Sperling ]
+ * let osmo-bts log a special notice if OML connection is closed early
+ * log reception of PCU_IF_MSG_PAG_REQ messages from osmo-pcu
+ * update sysinfo copies in all lchans upon SACCH FILL
+ * preserve lchan-specific SI overrides on SACCH FILL
+ * fix timespec subtraction in compute_elapsed_us()
+ * fix conditions for sending fill frames during RTS IND
+ * send TCH/F fill frames in DTX mode (WIP)
+ * Revert "send TCH/F fill frames in DTX mode (WIP)"
+ * prevent potential NULL dereference in virtbts's tx_tchh_fn
+ * properly initialize si3 in test_is_ccch_for_agch_setup()
+ * add missing check of osmo_wqueue_enqueue() return value
+
+ [ Harald Welte ]
+ * scheduler_trx: Add reminders to use libosmocore functions
+ * cosmetic: it's n_r in check_for_first_ciphrd(), not n_s
+ * Add min/max/std-dev measurement reporting for TOA256
+ * debian/rules: Don't overwrite .tarball-version
+ * CBCH: Fix rejecting SMS-CB related RSL messages
+ * [sysmo,lc15]: Consider CBCH channel combinations in chan_nr_by_sapi()
+ * CBCH: Move processing via L1SAP
+ * CBCH: Implement CBCH support for osmo-bts-{trx,virtual}
+ * CBCH: Use llist_first_entry_or_null() instead of reinventing it
+ * l1sap/scheduler: Consistently print chan_nr as hex number
+ * CBCH: Fix CBCH via L1SAP for osmo-bts-{sysmo,octphy,litecell15}
+ * get_lchan_by_chan_nr(): Fix resolution of CBCH
+ * CBCH: Add FIXME comments on queue overflow/underflow handling
+ * CBCH: sprinkle some OMSO_ASSERT() and guard against talloc failure
+ * CBCH: Fix CBCH implementation for osmo-bts-trx
+ * CBCH: Some more scheduler_mframe cleanup
+ * ensure all config file examples are well-formed
+ * lc15bts_mgr_vty: Ensure writing well-formed config files
+ * paging_test: Fix AGCH/PCH split test for second half of 102 multiframe
+ * Fix computing CCCH block number from frame number
+ * sysmo, virtual: properly handle BS-AG-BLKS-RES as received from BSC
+ * scheduler_trx.c: Switch to osmo_timerfd() of libosmocore >= 0.12.0
+ * initial checkin of manuals to public repo
+ * Add link to Asciidoc source code of manual
+ * spelling: message discriminator, not descriminator
+ * osmobts-abis: Add Revision log regarding dynamic cannels
+ * Documentation on AMR RTP in case of DTX
+ * rtp-amr.adoc: TCH/AFS Uplink
+ * rtp-amr.adoc: TCH/AFS Downlink: Inhibiting
+ * rtp-amr: TCH/AHS Uplink: FACCH/H During DTX
+ * rtp-amr.adoc: New TCH/AHS downlink chapters
+ * rtp-amr.adoc: Fixes to Message Sequence Charts
+ * update osmo-bts-virtual documentation, now that code is merged
+ * vty-ref: Update URI of docbook 5.0 schema
+ * osmo-bts-trx/loops.c: Add comments documenting TA + MS power control loop
+ * osmo-bts-trx/loops.[ch]: Make functions "void" if they always return 0
+ * osmo-bts-trx/loops.c: Use lchan name based logging
+ * osmo-bts-trx/loops.c: Make code control flow more readable
+
+ [ Philipp Maier ]
+ * rtp: make port range configurable, assign correct port numbers
+ * octphy: add support for 16x oversampling mode
+ * cosmetic: separate measurement testcase definitions
+ * cosmetic: unify measurement sample handling in one function
+ * measurement: make sure state is reset on chan act.
+ * measurement: make sure measurement interval end is detected
+ * measurement: fix measurement interval end detection
+ * osmo_mcast_sock: make sure SO_REUSEADDR is applied
+ * cosmetic: fix sourcecode formatting
+ * cosmetic: remove wrong comment
+ * measurement: add unit tests for is_meas_complete()
+ * measurement: fix sub frame table for TCH/H, SS1
+ * measurement: add unit tests for ts45008_83_is_sub()
+ * measurement: fix is_meas_overdue() and increase testcoverage
+ * cosmetic: rename *_meas_rep_fn10* to *_meas_rep_fn10*_by_*s
+ * cosmetic: test_is_meas_overdue() does not test is_meas_complete()
+ * measurement: substitue missing measurements
+ * measurement: add SUB measurements in test_lchan_meas_process_measurement
+ * paging: add unit-test to check different bs_ag_blks_res settings
+ * measurement: display fn_mod when measuremnet is added
+ * cosmetic: fix typo in comment
+ * measurement: remove missed interval end detection
+ * measurement: fix unit-test test_lchan_meas_process_measurement
+
+ [ Pau Espin Pedrol ]
+ * bts.c: Log name of RR msg type instead of value
+ * bts.c: Add missing include for gsm48_rr_msg_name
+ * bts_agch_enqueue: Decrease queue len hard_limit from 1000 to 100
+ * compact AGCH queue: Drop too msg diff than IMM_ASS_REJ
+ * Send DELETE_IND when dropping Imm Assign pending message
+ * lc15: Use correct type for hLayer1 field
+ * lc15: Fix incorrect cast of hLayer1
+ * pcu_sock: Log event pcu_sock created
+ * l1_if.c: Move decl of vars used in conditional macro
+ * sysmo: vty: Add missing include for lchan_deactivate
+ * sysmo: Fix memcmp in RF-MUTE.req for superfemto < 3.6.0
+ * sysmo: l1if_mute_rf: Declare vars inside ifdef section
+ * sysmo: l1_if.c: Avoid decl of unused vars and funcs with femtobts_v2.7 build
+ * sysmo: calib_file.c: Avoid decl of unused vars and funcs with femtobts_v2.7 build
+ * jenkins_*.sh: add --enable-werror to configure flags
+ * doc: Move calypsoBTS example into trx subdir
+ * build: Install example cfg files
+ * debian: Package installed example doc files
+ * Remove unneeded direct libortp dependency
+ * debian: Make osmo-bts-* packages conflict with old osmo-bts package
+ * debian: Create dbg package for osm-bts-virtual
+ * rsl: Use value_string to print encryption algo name
+ * l1sap: add_l1sap_header: Compact msgb_push ret assignment
+ * sched: Log RX->RTP packet like we do in add_l1sap_header
+ * scheduler: Log error on fn jump
+ * trx: scheduler: Keep RTP clock up to date while in DTXu pause
+ * Move systemd service to contrib/systemd
+ * Install systemd services with autotools
+ * Install sample cfg file to /etc/osmocom
+ * doc/examples/Makefile: Install bts-mgr cfg files used by systemd services
+ * lc15: vty: Add missing include for lchan_deactivate
+ * lc15: fsync requires fd instead of file stream
+ * lc15: rewrite and refactor code to print hwversion description
+ * lc15: led_sleep_cb: pass correct ptr to llist_move_tail
+ * abis: inp_s_cbfn: Improve logging signal related information
+ * lchan_meas_check_compute: Log value during incorrect num of SUB measurementes detected
+ * l1sap: Log name of chan_nr instead of hex value
+ * rsl_rx_chan-activ: Improve logging information
+ * gsm_pchan2chan_nr: Fix conversion of CCCH_LCHAN
+ * Convert lchan CCCH_LCHAN to chan_nr BCCH and viceversa
+ * {oc2g,sysmo}-mgr-calib: Fix build against gpsd >= 3.18
+ * bts: Allocate TRX for BTS dynamically, deprecate -t
+ * bts-trx: trx_if: Use struct to store CTRL msg parsed responses
+ * bts-trx: setup timer once at creation time
+ * common: Implement OML for trx_set_available(1)
+ * bts-trx: Allow re-try without exit if POWERON fails in osmo-trx
+ * bts: Fix TRX0 param initialization
+ * rsl: Log lchan state during dynts PDCH->TCH
+ * rsl: Avoid sending ipa PDCH DEACT NACK followed by ACK
+ * bts-trx: early return on POWERON success
+ * cosmetic: fix whitespace
+ * bts_model: Allow TS connect to be processed asynchronously
+ * OsmoBTS/chapters/configuration.adoc: Add bts index in example
+ * OsmoBTS: Update osmotrx ip to diff between local and remote
+ * rtp-amr: Describe requirement to recieve all PH-DATA.ind events
+ * rtp-amr: Fix typo and trailing whitespace
+ * Allow easily disabling GFDL references
+ * OsmoBTS: bts-models: Add Lime Microsystems devices as supported osmo-trx
+ * Introduce chapter trx_if.adoc and add it to OsmoTRX and OsmoBTS
+ * bts: Fix typo
+ * oc2g: Fix headers missing during make distcheck
+ * bts-trx: (n)ack PDCH DEACT only after TRX answered SETSLOT
+ * sysmobts_mgr: Prepare code for gpsd < 2.96 support
+ * sysmobts_mgr: Add support for gpsd < 2.96
+ * rsl: Send PDCH ACT NACK if TCH chan is still active
+
+ [ Vadim Yanitskiy ]
+ * Clarify frame loss counter for l1sched_chan_state
+ * osmo-bts-trx/l1_if.c: cosmetic: fix typo in debug msg
+ * common/rsl.c: tweak log message in lapdm_rll_tx_cb()
+ * contrib/jenkins_*.sh: drop rudimentary '--with-osmo-pcu'
+ * common/pcu_sock.c: cosmetic: explicitly address lchan
+ * common/scheduler.c: track TDMA frame loss per logical channels
+ * common/vty.c: fix deprecated osmo_str2lower() usage
+ * Fix deprecated gsm_arfcn2band(), use gsm_arfcn2band_rc()
+
+ [ Neels Hofmeyr ]
+ * cosmetic: abis.c: typo "exixt"
+ * fix ip.access dyn TS for osmo-bts-trx
+ * fix RSL Chan Mode Modif for dyn TS
+ * vty: mark 'rtp bind-ip' deprecated, not hidden
+ * Importing history from osmo-gsm-manuals
+ * OsmoBTS: typo x2 ('Objects Classes' -> 'Object Classes')
+ * OsmoBTS: fix typos, streamline language style
+ * OsmoBTS: s/content of this attribute/this attribute/
+ * OsmoBTS: explain IEs marked 'ignored' *and* 'Received'
+ * abis/oml.doc: remove duplicate sentence part
+ * OsmoBTS: typos
+ * OsmoBTS: wording tweak
+ * OsmoBTS: hardware support: remove dup, tweak wording
+ * Document dynamic channels on Abis, both IPA and Osmocom style
+ * OsmoBTS/abis/rsl: fix subtitle for ladder diagram of osmo dyn switchover
+ * OsmoBTS/abis/dyn_ts_osmocom_style.msc: adjust PDCH Act ack
+ * OsmoBTS/abis/rsl.adoc: fix missing section header
+ * OsmoBTS/chapters/dynamic-timeslots.adoc: Remove obsolete links
+ * osmobts-usermanual.adoc: fix link to abis.adoc chapter
+ * OsmoBTS/chapters/configuration.adoc: fix index numbering
+ * OsmoBTS/abis/rsl: cosmetic: 'IPA style'
+ * OsmoBTS/abis/rsl: add missing info for Osmocom Dyn Channels
+ * make clean: also remove generated image files
+ * add 'make check' target
+ * OsmoBTS/abis/rsl: combine separate dyn ts sections
+ * fix 'make clean': shell glob, ignore failure
+ * OsmoBTS/abis/rsl: split dyn TS ladder diagrams to fit on page
+ * fix build: abis: re-add dependencies
+ * dynamic timeslots: add BSC level config instructions
+ * refactor Makefile build rules, don't use the FORCE
+
+ [ Keith Whyte ]
+ * log: add error log for RSL Chan Mode Modif
+ * fix handling of odd pchans in bts_supports_cm()
+
+ [ Omar Ramadan ]
+ * Add OC-2G BTS sources
+
+ [ Max ]
+ * osmo-bts-trx: print TRX socket addresses in 'show transceiver'
+ * Fix type mismatch
+ * Drop unused function
+ * Add OsmoBTS control interface description
+ * Move RTP AMR doc to top level
+ * Add DTX implementation details to RTP AMR
+ * Sync DTX FSM with OsmoBTS code
+
+ [ Holger Hans Peter Freyther ]
+ * OsmoBTS: Fix the author name and mail address
+
+ [ Jonathan Brielmaier ]
+ * fix various typos across all manuals
+
+ [ Daniel Willmann ]
+ * Add section about configuring power-ramping
+ * OsmoBTS: Print VTY command in fixed-width font
+ * OsmoBTS: Fix typo
+
+ [ Alexander Couzens ]
+ * OsmoBTS: add vty reference documentation
+ * OsmoBTS: generate osmobts-abis.pdf again
+
+ [ Ivaylo Kostov ]
+ * BSC,BTS: add diagrams of PCU-BTS-NITB-SGSN relationships
+
+ [ Philipp ]
+ * Describe how to run multiple instances of osmo-nitb and osmo-bts
+
+ [ Oliver Smith ]
+ * build manuals moved here from osmo-gsm-manuals.git
+ * Fix DISTCHECK_CONFIGURE_FLAGS override
+ * contrib/jenkins_*.sh: build and publish manuals
+ * contrib: fix makedistcheck with disabled systemd
+
+ -- Harald Welte <laforge at gnumonks.org> Sun, 20 Jan 2019 21:13:37 +0100
+
osmo-bts (0.8.1) unstable; urgency=medium
[ Neels Hofmeyr ]
--
To view, visit https://gerrit.osmocom.org/12650
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-bts
Gerrit-Branch: master
Gerrit-MessageType: merged
Gerrit-Change-Id: Ie33252aef4144f9bb825d7c234970fd4e6083bb2
Gerrit-Change-Number: 12650
Gerrit-PatchSet: 2
Gerrit-Owner: Harald Welte <laforge at gnumonks.org>
Gerrit-Reviewer: Harald Welte <laforge at gnumonks.org>
Gerrit-Reviewer: Jenkins Builder (1000002)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20190120/c3d53efc/attachment.htm>