This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Neels Hofmeyr gerrit-no-reply at lists.osmocom.orgNeels Hofmeyr has submitted this change and it was merged. ( https://gerrit.osmocom.org/12388 ) Change subject: make sure early lchan act failure resets the lchan ...................................................................... make sure early lchan act failure resets the lchan Fix crash after AMR configuration fails. The crash is due to an assertion that finds a non-NULL conn in the lchan, when re-using an lchan that has failed in AMR configuration earlier on. That is because the AMR config still happens in state UNUSED. DCHAN ERROR lchan(0-0-2-TCH_F_TCH_H_PDCH-0)[0x6120000066a0]{UNUSED}: (type=TCH_F) lchan allocation failed in state UNUSED: Can not generate multirate configuration IE ... DCHAN DEBUG lchan(0-0-2-TCH_F_TCH_H_PDCH-0)[0x6120000066a0]{UNUSED}: (type=TCH_F) After failure handling, already in state UNUSED ... ... DCHAN DEBUG lchan(0-0-2-TCH_F_TCH_H_PDCH-0)[0x6120000066a0]{UNUSED}: Received Event LCHAN_EV_ACTIVATE (lchan_fsm.c:324) Assert failed !lchan->conn ../../../../src/osmo-bsc/src/osmo-bsc/lchan_fsm.c:491 The FSM design idea is that when returning to the UNUSED state, all lchan state is cleared. However, when calling lchan_activate(), a failure may happen still in state UNUSED, so that we don't transition *back* to UNUSED properly. So, first transition out of UNUSED before failures can happen. (Other ways to solve this would be to invoke lchan clearing even if already in UNUSED, but semantically, transitioning first makes more sense.) Upon LCHAN_EV_ACTIVATE, just remember the lchan_activate_info and transition to WAIT_TS_READY, so that on lchan_fail(), we can normally transition back to UNUSED and clear the lchan. Move the initial lchan activation code to lchan_fsm_wait_ts_ready_onenter(). Also, there is a bit of duplication of members of the lchan->activate (lchan state) and the lchan_activate_info (passed to lchan_activate()) structs. The fix for this also removes the dup: Add struct lchan_activate_info as child struct at lchan->activate.info, drop the other lchan->activate members that would dup .info.*. Move struct lchan_activate_info declaration to gsm_data.h. Apply the new '.info' member struct throughout the code. Related: OS#3737 Change-Id: Ide665b10fa3f4583059c55346db8da833959e3cc --- M include/osmocom/bsc/gsm_data.h M include/osmocom/bsc/lchan_fsm.h M src/osmo-bsc/assignment_fsm.c M src/osmo-bsc/bsc_subscr_conn_fsm.c M src/osmo-bsc/handover_fsm.c M src/osmo-bsc/lchan_fsm.c M src/osmo-bsc/lchan_rtp_fsm.c M src/osmo-bsc/osmo_bsc_bssap.c 8 files changed, 105 insertions(+), 107 deletions(-) Approvals: Jenkins Builder: Verified Harald Welte: Looks good to me, approved diff --git a/include/osmocom/bsc/gsm_data.h b/include/osmocom/bsc/gsm_data.h index cf34c6f..2090142 100644 --- a/include/osmocom/bsc/gsm_data.h +++ b/include/osmocom/bsc/gsm_data.h @@ -503,6 +503,19 @@ static inline const char *lchan_activate_mode_name(enum lchan_activate_mode activ_for) { return get_value_string(lchan_activate_mode_names, activ_for); } +struct lchan_activate_info { + enum lchan_activate_mode activ_for; + struct gsm_subscriber_connection *for_conn; + /* This always is for a specific lchan, so its lchan->type indicates full or half rate. + * When a dyn TS was selected, the lchan->type has been set to the desired rate. */ + enum gsm48_chan_mode chan_mode; + uint16_t s15_s0; + bool requires_voice_stream; + bool wait_before_switching_rtp; /*< true = requires LCHAN_EV_READY_TO_SWITCH_RTP */ + uint16_t msc_assigned_cic; + struct gsm_lchan *re_use_mgw_endpoint_from_lchan; +}; + struct gsm_lchan { /* The TS that we're part of */ struct gsm_bts_trx_ts *ts; @@ -517,18 +530,14 @@ struct mgwep_ci *mgw_endpoint_ci_bts; struct { - enum lchan_activate_mode activ_for; + struct lchan_activate_info info; bool activ_ack; /*< true as soon as RSL Chan Activ Ack is received */ bool immediate_assignment_sent; /*! This flag ensures that when an lchan activation has succeeded, and we have already * sent ACKs like Immediate Assignment or BSSMAP Assignment Complete, and if other errors * occur later, e.g. during release, that we don't send a NACK out of context. */ bool concluded; - bool requires_voice_stream; - bool wait_before_switching_rtp; /*< true = requires LCHAN_EV_READY_TO_SWITCH_RTP */ - uint16_t msc_assigned_cic; enum gsm0808_cause gsm0808_error_cause; - struct gsm_lchan *re_use_mgw_endpoint_from_lchan; } activate; struct { diff --git a/include/osmocom/bsc/lchan_fsm.h b/include/osmocom/bsc/lchan_fsm.h index 48cd383..55ab024 100644 --- a/include/osmocom/bsc/lchan_fsm.h +++ b/include/osmocom/bsc/lchan_fsm.h @@ -52,19 +52,6 @@ void lchan_release(struct gsm_lchan *lchan, bool do_rr_release, bool err, enum gsm48_rr_cause cause_rr); -struct lchan_activate_info { - enum lchan_activate_mode activ_for; - struct gsm_subscriber_connection *for_conn; - /* This always is for a specific lchan, so its lchan->type indicates full or half rate. - * When a dyn TS was selected, the lchan->type has been set to the desired rate. */ - enum gsm48_chan_mode chan_mode; - uint16_t s15_s0; - bool requires_voice_stream; - bool wait_before_switching_rtp; - uint16_t msc_assigned_cic; - struct gsm_lchan *old_lchan; -}; - void lchan_activate(struct gsm_lchan *lchan, struct lchan_activate_info *info); void lchan_ready_to_switch_rtp(struct gsm_lchan *lchan); diff --git a/src/osmo-bsc/assignment_fsm.c b/src/osmo-bsc/assignment_fsm.c index 93362f8..a24f7f9 100644 --- a/src/osmo-bsc/assignment_fsm.c +++ b/src/osmo-bsc/assignment_fsm.c @@ -385,7 +385,7 @@ .s15_s0 = req->s15_s0, .requires_voice_stream = conn->assignment.requires_voice_stream, .msc_assigned_cic = req->msc_assigned_cic, - .old_lchan = conn->lchan, + .re_use_mgw_endpoint_from_lchan = conn->lchan, }; lchan_activate(conn->assignment.new_lchan, &info); } diff --git a/src/osmo-bsc/bsc_subscr_conn_fsm.c b/src/osmo-bsc/bsc_subscr_conn_fsm.c index 85e754f..c1ac6eb 100644 --- a/src/osmo-bsc/bsc_subscr_conn_fsm.c +++ b/src/osmo-bsc/bsc_subscr_conn_fsm.c @@ -550,7 +550,7 @@ } else verb = MGCP_VERB_CRCX; - gscon_ensure_mgw_endpoint(conn, for_lchan->activate.msc_assigned_cic); + gscon_ensure_mgw_endpoint(conn, for_lchan->activate.info.msc_assigned_cic); if (!conn->user_plane.mgw_endpoint) { LOGPFSML(conn->fi, LOGL_ERROR, "Unable to allocate endpoint info\n"); diff --git a/src/osmo-bsc/handover_fsm.c b/src/osmo-bsc/handover_fsm.c index aae50b9..35f2e55 100644 --- a/src/osmo-bsc/handover_fsm.c +++ b/src/osmo-bsc/handover_fsm.c @@ -360,7 +360,7 @@ .chan_mode = conn->lchan->tch_mode, .requires_voice_stream = conn->lchan->mgw_endpoint_ci_bts ? true : false, .msc_assigned_cic = conn->ho.inter_bsc_in.msc_assigned_cic, - .old_lchan = conn->lchan, + .re_use_mgw_endpoint_from_lchan = conn->lchan, .wait_before_switching_rtp = true, }; @@ -706,7 +706,7 @@ ho_perf_params.chosen_encr_alg = lchan->encr.alg_id; ho_perf_params.chosen_encr_alg_present = true; - if (ho->new_lchan->activate.requires_voice_stream) { + if (ho->new_lchan->activate.info.requires_voice_stream) { /* Speech Version (chosen) 3.2.2.51 */ ho_perf_params.speech_version_chosen = gsm0808_permitted_speech(lchan->type, lchan->tch_mode); ho_perf_params.speech_version_chosen_present = true; @@ -1010,7 +1010,7 @@ struct gsm_subscriber_connection *conn = ho_fi_conn(fi); struct handover *ho = &conn->ho; - if (ho->new_lchan->activate.requires_voice_stream + if (ho->new_lchan->activate.info.requires_voice_stream && (ho->scope & HO_INTER_BSC_IN)) ho_fsm_state_chg(HO_ST_WAIT_MGW_ENDPOINT_TO_MSC); else diff --git a/src/osmo-bsc/lchan_fsm.c b/src/osmo-bsc/lchan_fsm.c index c873025..fc1bcbf 100644 --- a/src/osmo-bsc/lchan_fsm.c +++ b/src/osmo-bsc/lchan_fsm.c @@ -151,7 +151,7 @@ return; lchan->activate.concluded = true; - switch (lchan->activate.activ_for) { + switch (lchan->activate.info.activ_for) { case FOR_MS_CHANNEL_REQUEST: /* No signalling to do here, MS is free to use the channel, and should go on to connect * to the MSC and establish a subscriber connection. */ @@ -201,7 +201,7 @@ default: LOG_LCHAN(lchan, LOGL_NOTICE, "lchan %s fully established\n", - lchan_activate_mode_name(lchan->activate.activ_for)); + lchan_activate_mode_name(lchan->activate.info.activ_for)); break; } } @@ -238,7 +238,7 @@ lchan_set_last_error(_lchan, "lchan %s in state %s: " fmt, \ _lchan->activate.concluded ? "failure" : "allocation failed", \ osmo_fsm_state_name(fsm, state_was), ## args); \ - lchan_on_activation_failure(_lchan, _lchan->activate.activ_for, _lchan->conn); \ + lchan_on_activation_failure(_lchan, _lchan->activate.info.activ_for, _lchan->conn); \ if (fi->state != state_chg) \ lchan_fsm_state_chg(state_chg); \ else \ @@ -481,8 +481,6 @@ { struct lchan_activate_info *info = data; struct gsm_lchan *lchan = lchan_fi_lchan(fi); - struct gsm_bts *bts = lchan->ts->trx->bts; - struct gsm48_multi_rate_conf mr_conf; switch (event) { @@ -493,63 +491,8 @@ lchan_set_last_error(lchan, NULL); lchan->release.requested = false; - lchan->conn = info->for_conn; - lchan->activate.activ_for = info->activ_for; - lchan->activate.requires_voice_stream = info->requires_voice_stream; - lchan->activate.wait_before_switching_rtp = info->wait_before_switching_rtp; - lchan->activate.msc_assigned_cic = info->msc_assigned_cic; + lchan->activate.info = *info; lchan->activate.concluded = false; - lchan->activate.re_use_mgw_endpoint_from_lchan = info->old_lchan; - - if (info->old_lchan) - lchan->encr = info->old_lchan->encr; - else { - lchan->encr = (struct gsm_encr){ - .alg_id = RSL_ENC_ALG_A5(0), /* no encryption */ - }; - } - - /* If there is a previous lchan, and the new lchan is on the same cell as previous one, - * take over power and TA values. Otherwise, use max power and zero TA. */ - if (info->old_lchan && info->old_lchan->ts->trx->bts == bts) { - lchan->ms_power = info->old_lchan->ms_power; - lchan->bs_power = info->old_lchan->bs_power; - lchan->rqd_ta = info->old_lchan->rqd_ta; - } else { - lchan->ms_power = ms_pwr_ctl_lvl(bts->band, bts->ms_max_power); - /* From lchan_reset(): - * - bs_power is still zero, 0dB reduction, output power = Pn. - * - TA is still zero, to be determined by RACH. */ - } - - if (info->chan_mode == GSM48_CMODE_SPEECH_AMR) { - gsm48_mr_cfg_from_gsm0808_sc_cfg(&mr_conf, info->s15_s0); - if (lchan_mr_config(lchan, &mr_conf) < 0) { - lchan_fail("Can not generate multirate configuration IE\n"); - return; - } - } - - switch (info->chan_mode) { - - case GSM48_CMODE_SIGN: - lchan->rsl_cmode = RSL_CMOD_SPD_SIGN; - lchan->tch_mode = GSM48_CMODE_SIGN; - break; - - case GSM48_CMODE_SPEECH_V1: - case GSM48_CMODE_SPEECH_EFR: - case GSM48_CMODE_SPEECH_AMR: - lchan->rsl_cmode = RSL_CMOD_SPD_SPEECH; - lchan->tch_mode = info->chan_mode; - break; - - default: - lchan_fail("Not implemented: cannot activate for chan mode %s", - gsm48_chan_mode_name(info->chan_mode)); - return; - } - lchan_fsm_state_chg(LCHAN_ST_WAIT_TS_READY); break; @@ -561,18 +504,75 @@ static void lchan_fsm_wait_ts_ready_onenter(struct osmo_fsm_inst *fi, uint32_t prev_state) { struct gsm_lchan *lchan = lchan_fi_lchan(fi); - struct mgwep_ci *use_mgwep_ci = lchan_use_mgw_endpoint_ci_bts(lchan); + struct gsm48_multi_rate_conf mr_conf; + struct gsm_bts *bts = lchan->ts->trx->bts; + struct mgwep_ci *use_mgwep_ci; + struct gsm_lchan *old_lchan = lchan->activate.info.re_use_mgw_endpoint_from_lchan; + struct lchan_activate_info *info = &lchan->activate.info; if (lchan->release.requested) { lchan_fail("Release requested while activating"); return; } + lchan->conn = info->for_conn; + + if (old_lchan) + lchan->encr = old_lchan->encr; + else { + lchan->encr = (struct gsm_encr){ + .alg_id = RSL_ENC_ALG_A5(0), /* no encryption */ + }; + } + + /* If there is a previous lchan, and the new lchan is on the same cell as previous one, + * take over power and TA values. Otherwise, use max power and zero TA. */ + if (old_lchan && old_lchan->ts->trx->bts == bts) { + lchan->ms_power = old_lchan->ms_power; + lchan->bs_power = old_lchan->bs_power; + lchan->rqd_ta = old_lchan->rqd_ta; + } else { + lchan->ms_power = ms_pwr_ctl_lvl(bts->band, bts->ms_max_power); + /* From lchan_reset(): + * - bs_power is still zero, 0dB reduction, output power = Pn. + * - TA is still zero, to be determined by RACH. */ + } + + if (info->chan_mode == GSM48_CMODE_SPEECH_AMR) { + gsm48_mr_cfg_from_gsm0808_sc_cfg(&mr_conf, info->s15_s0); + if (lchan_mr_config(lchan, &mr_conf) < 0) { + lchan_fail("Can not generate multirate configuration IE\n"); + return; + } + } + + switch (info->chan_mode) { + + case GSM48_CMODE_SIGN: + lchan->rsl_cmode = RSL_CMOD_SPD_SIGN; + lchan->tch_mode = GSM48_CMODE_SIGN; + break; + + case GSM48_CMODE_SPEECH_V1: + case GSM48_CMODE_SPEECH_EFR: + case GSM48_CMODE_SPEECH_AMR: + lchan->rsl_cmode = RSL_CMOD_SPD_SPEECH; + lchan->tch_mode = info->chan_mode; + break; + + default: + lchan_fail("Not implemented: cannot activate for chan mode %s", + gsm48_chan_mode_name(info->chan_mode)); + return; + } + + use_mgwep_ci = lchan_use_mgw_endpoint_ci_bts(lchan); + LOG_LCHAN(lchan, LOGL_INFO, "Activation requested: %s voice=%s MGW-ci=%s type=%s tch-mode=%s\n", - lchan_activate_mode_name(lchan->activate.activ_for), - lchan->activate.requires_voice_stream ? "yes" : "no", - lchan->activate.requires_voice_stream ? + lchan_activate_mode_name(lchan->activate.info.activ_for), + lchan->activate.info.requires_voice_stream ? "yes" : "no", + lchan->activate.info.requires_voice_stream ? (use_mgwep_ci ? mgwep_ci_name(use_mgwep_ci) : "new") : "none", gsm_lchant_name(lchan->type), @@ -583,7 +583,7 @@ osmo_fsm_inst_dispatch(lchan->ts->fi, TS_EV_LCHAN_REQUESTED, lchan); /* Prepare an MGW endpoint CI if appropriate. */ - if (lchan->activate.requires_voice_stream) + if (lchan->activate.info.requires_voice_stream) lchan_rtp_fsm_start(lchan); } @@ -627,7 +627,7 @@ return; } - switch (lchan->activate.activ_for) { + switch (lchan->activate.info.activ_for) { case FOR_MS_CHANNEL_REQUEST: act_type = RSL_ACT_INTRA_IMM_ASS; break; @@ -709,7 +709,7 @@ return; } - switch (lchan->activate.activ_for) { + switch (lchan->activate.info.activ_for) { case FOR_MS_CHANNEL_REQUEST: rc = rsl_tx_imm_assignment(lchan); @@ -764,7 +764,7 @@ default: LOG_LCHAN(lchan, LOGL_NOTICE, "lchan %s is now active\n", - lchan_activate_mode_name(lchan->activate.activ_for)); + lchan_activate_mode_name(lchan->activate.info.activ_for)); break; } @@ -784,7 +784,7 @@ switch (event) { case LCHAN_EV_RLL_ESTABLISH_IND: - if (!lchan->activate.requires_voice_stream + if (!lchan->activate.info.requires_voice_stream || lchan_rtp_established(lchan)) lchan_fsm_state_chg(LCHAN_ST_ESTABLISHED); return; @@ -1381,6 +1381,8 @@ if (!lchan) return; + lchan->activate.info.for_conn = NULL; + conn = lchan->conn; if (conn) { /* Log for both lchan FSM and conn FSM to ease reading the log in case of problems */ diff --git a/src/osmo-bsc/lchan_rtp_fsm.c b/src/osmo-bsc/lchan_rtp_fsm.c index 6ab3da4..84cc287 100644 --- a/src/osmo-bsc/lchan_rtp_fsm.c +++ b/src/osmo-bsc/lchan_rtp_fsm.c @@ -111,9 +111,9 @@ /* Use old lchan only if there is an MGW endpoint present. Otherwise, on ROLLBACK, we might put * an endpoint "back" to an lchan that never had one to begin with. */ - if (lchan->activate.re_use_mgw_endpoint_from_lchan - && !lchan->activate.re_use_mgw_endpoint_from_lchan->mgw_endpoint_ci_bts) - lchan->activate.re_use_mgw_endpoint_from_lchan = NULL; + if (lchan->activate.info.re_use_mgw_endpoint_from_lchan + && !lchan->activate.info.re_use_mgw_endpoint_from_lchan->mgw_endpoint_ci_bts) + lchan->activate.info.re_use_mgw_endpoint_from_lchan = NULL; lchan_rtp_fsm_state_chg(LCHAN_RTP_ST_WAIT_MGW_ENDPOINT_AVAILABLE); } @@ -127,8 +127,8 @@ return lchan->mgw_endpoint_ci_bts; if (lchan_state_is(lchan, LCHAN_ST_ESTABLISHED)) return NULL; - if (lchan->activate.re_use_mgw_endpoint_from_lchan) - return lchan->activate.re_use_mgw_endpoint_from_lchan->mgw_endpoint_ci_bts; + if (lchan->activate.info.re_use_mgw_endpoint_from_lchan) + return lchan->activate.info.re_use_mgw_endpoint_from_lchan->mgw_endpoint_ci_bts; return NULL; } @@ -147,7 +147,7 @@ return; } - mgwep = gscon_ensure_mgw_endpoint(lchan->conn, lchan->activate.msc_assigned_cic); + mgwep = gscon_ensure_mgw_endpoint(lchan->conn, lchan->activate.info.msc_assigned_cic); if (!mgwep) { lchan_rtp_fail("Internal error: cannot obtain MGW endpoint handle for conn"); return; @@ -232,7 +232,7 @@ { struct gsm_lchan *lchan = lchan_rtp_fi_lchan(fi); - if (lchan->activate.wait_before_switching_rtp) { + if (lchan->activate.info.wait_before_switching_rtp) { LOG_LCHAN_RTP(lchan, LOGL_DEBUG, "Waiting for an event by caller before switching RTP\n"); lchan_rtp_fsm_state_chg(LCHAN_RTP_ST_WAIT_READY_TO_SWITCH_RTP); @@ -305,7 +305,7 @@ return; case LCHAN_RTP_EV_READY_TO_SWITCH_RTP: - lchan->activate.wait_before_switching_rtp = false; + lchan->activate.info.wait_before_switching_rtp = false; return; case LCHAN_RTP_EV_RELEASE: @@ -365,7 +365,7 @@ return; case LCHAN_RTP_EV_READY_TO_SWITCH_RTP: - lchan->activate.wait_before_switching_rtp = false; + lchan->activate.info.wait_before_switching_rtp = false; return; case LCHAN_RTP_EV_RELEASE: @@ -437,7 +437,7 @@ uint32_t prev_state) { struct gsm_lchan *lchan = lchan_rtp_fi_lchan(fi); - struct gsm_lchan *old_lchan = lchan->activate.re_use_mgw_endpoint_from_lchan; + struct gsm_lchan *old_lchan = lchan->activate.info.re_use_mgw_endpoint_from_lchan; if (lchan->release.requested) { lchan_rtp_fail("Release requested while activating"); @@ -514,7 +514,7 @@ static void lchan_rtp_fsm_rollback_onenter(struct osmo_fsm_inst *fi, uint32_t prev_state) { struct gsm_lchan *lchan = lchan_rtp_fi_lchan(fi); - struct gsm_lchan *old_lchan = lchan->activate.re_use_mgw_endpoint_from_lchan; + struct gsm_lchan *old_lchan = lchan->activate.info.re_use_mgw_endpoint_from_lchan; if (!lchan->mgw_endpoint_ci_bts || !old_lchan) { osmo_fsm_inst_term(fi, OSMO_FSM_TERM_REQUEST, 0); @@ -526,7 +526,7 @@ static void lchan_rtp_fsm_rollback(struct osmo_fsm_inst *fi, uint32_t event, void *data) { struct gsm_lchan *lchan = lchan_rtp_fi_lchan(fi); - struct gsm_lchan *old_lchan = lchan->activate.re_use_mgw_endpoint_from_lchan; + struct gsm_lchan *old_lchan = lchan->activate.info.re_use_mgw_endpoint_from_lchan; switch (event) { @@ -560,7 +560,7 @@ struct gsm_lchan *lchan = lchan_rtp_fi_lchan(fi); /* Make sure that we will not hand back the MGW endpoint to any old lchan from here on. */ - lchan->activate.re_use_mgw_endpoint_from_lchan = NULL; + lchan->activate.info.re_use_mgw_endpoint_from_lchan = NULL; } static void lchan_rtp_fsm_established(struct osmo_fsm_inst *fi, uint32_t event, void *data) diff --git a/src/osmo-bsc/osmo_bsc_bssap.c b/src/osmo-bsc/osmo_bsc_bssap.c index 60ec5fb..f2ccf2c 100644 --- a/src/osmo-bsc/osmo_bsc_bssap.c +++ b/src/osmo-bsc/osmo_bsc_bssap.c @@ -1101,7 +1101,7 @@ }; /* speech_codec_chosen */ - if (ho->new_lchan->activate.requires_voice_stream && gscon_is_aoip(conn)) { + if (ho->new_lchan->activate.info.requires_voice_stream && gscon_is_aoip(conn)) { int perm_spch = gsm0808_permitted_speech(lchan->type, lchan->tch_mode); params.speech_codec_chosen_present = true; rc = gsm0808_speech_codec_from_chan_type(¶ms.speech_codec_chosen, perm_spch); -- To view, visit https://gerrit.osmocom.org/12388 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-bsc Gerrit-Branch: master Gerrit-MessageType: merged Gerrit-Change-Id: Ide665b10fa3f4583059c55346db8da833959e3cc Gerrit-Change-Number: 12388 Gerrit-PatchSet: 2 Gerrit-Owner: Neels Hofmeyr <nhofmeyr at sysmocom.de> Gerrit-Reviewer: Harald Welte <laforge at gnumonks.org> Gerrit-Reviewer: Jenkins Builder (1000002) Gerrit-Reviewer: Neels Hofmeyr <nhofmeyr at sysmocom.de> Gerrit-CC: Pau Espin Pedrol <pespin at sysmocom.de> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20190103/581d5370/attachment.htm>