This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Harald Welte gerrit-no-reply at lists.osmocom.orgHarald Welte has submitted this change and it was merged. ( https://gerrit.osmocom.org/12911 ) Change subject: minor: rename output binary to bootloader ...................................................................... minor: rename output binary to bootloader Change-Id: I4dfa761c482d6d061eddf3ff8ee91ec049955f53 --- M README.md M gcc/Makefile 2 files changed, 4 insertions(+), 4 deletions(-) Approvals: Jenkins Builder: Verified Harald Welte: Looks good to me, approved diff --git a/README.md b/README.md index 58833aa..96cf583 100644 --- a/README.md +++ b/README.md @@ -40,7 +40,7 @@ The board name can be set in 'gcc/Makefile' *BOARD* variable, or provided while compiling (e.g. `make BOARD=SAME54_XPLAINED_PRO`). *SAME54_XPLAINED_PRO* is the default value. -The resulting firmware binary is `AtmelStart.bin`. +The resulting firmware binary is `bootloader.bin`. Flashing ======== @@ -60,7 +60,7 @@ To flash the USB DFU bootloader, perform the following actions: * remove reserved bootloader space so we can erase it: `edbg --target atmel_cm4v2 --fuse wv,29:26,15` * erase the whole flash: `edbg --target atmel_cm4v2 --fuse v,29:26,15 --erase` -* program the bootloader: `edbg --target atmel_cm4v2 --fuse v,29:26,15 --program --verify --file AtmelStart.bin` +* program the bootloader: `edbg --target atmel_cm4v2 --fuse v,29:26,15 --program --verify --file bootloader.bin` * reserve bootloader space: `edbg --target atmel_cm4v2 --fuse wv,29:26,13` SWJ @@ -76,5 +76,5 @@ Using OpenOCD (with the [SAM E54 patch](http://openocd.zylin.com/#/c/4272/)) and a ST-LINK/V2 SWD adapter, run the following command: -`openocd --file interface/stlink.cfg --command "transport select hla_swd" --command "set CHIPNAME same54" --command "set CPUTAPID 0x2ba01477" --file target/atsame5x.cfg --command "init" --command "reset halt" --command "atsame5 bootloader 0" --command "flash erase_sector 0 0 last" --command "reset halt" --command "program ./AtmelStart.bin" --command "atsame5 bootloader 16384" --command "reset run" --command "shutdown"` +`openocd --file interface/stlink.cfg --command "transport select hla_swd" --command "set CHIPNAME same54" --command "set CPUTAPID 0x2ba01477" --file target/atsame5x.cfg --command "init" --command "reset halt" --command "atsame5 bootloader 0" --command "flash erase_sector 0 0 last" --command "reset halt" --command "program ./bootloader.bin" --command "atsame5 bootloader 16384" --command "reset run" --command "shutdown"` diff --git a/gcc/Makefile b/gcc/Makefile index 7ad24b1..0817806 100644 --- a/gcc/Makefile +++ b/gcc/Makefile @@ -167,7 +167,7 @@ "gcc/system_same54.d" \ "atmel_start.d" -OUTPUT_FILE_NAME :=AtmelStart +OUTPUT_FILE_NAME := bootloader QUOTE := " OUTPUT_FILE_PATH +=$(OUTPUT_FILE_NAME).elf OUTPUT_FILE_PATH_AS_ARGS +=$(OUTPUT_FILE_NAME).elf -- To view, visit https://gerrit.osmocom.org/12911 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-asf4-dfu Gerrit-Branch: master Gerrit-MessageType: merged Gerrit-Change-Id: I4dfa761c482d6d061eddf3ff8ee91ec049955f53 Gerrit-Change-Number: 12911 Gerrit-PatchSet: 2 Gerrit-Owner: Kévin Redon <kredon at sysmocom.de> Gerrit-Reviewer: Harald Welte <laforge at gnumonks.org> Gerrit-Reviewer: Jenkins Builder (1000002) -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20190214/8bfb627d/attachment.htm>