Change in simtrace2[master]: qmod: Don't print EEPROM operations in help when not supported

[laforge]

laforge has uploaded this change for review. ( https://gerrit.osmocom.org/c/simtrace2/+/16577 )


Change subject: qmod: Don't print EEPROM operations in help when not supported
......................................................................

qmod: Don't print EEPROM operations in help when not supported

As of Change-Id I1c8cca2f7f0f0070d7bf1ade676e035c45e4d5ab, a firmware
compiled without ALLOW_PEER_ERASE will not support resetting the hub or
writing to its EEPROM.  Let's make sure to remove those options also
from the menu.

Change-Id: I3071332d85e6168947384ddc230298d3293e4668
---
M firmware/libboard/qmod/source/board_qmod.c
1 file changed, 4 insertions(+), 0 deletions(-)



  git pull ssh://gerrit.osmocom.org:29418/simtrace2 refs/changes/77/16577/1

diff --git a/firmware/libboard/qmod/source/board_qmod.c b/firmware/libboard/qmod/source/board_qmod.c
index 0b03180..900a3bc 100644
--- a/firmware/libboard/qmod/source/board_qmod.c
+++ b/firmware/libboard/qmod/source/board_qmod.c
@@ -205,13 +205,17 @@
 		printf("\tg\tswitch off LED 2\n\r");
 		printf("\tG\tswitch off LED 2\n\r");
 		if (qmod_sam3_is_12()) {
+#if (ALLOW_PEER_ERASE > 0)
 			printf("\tE\tprogram EEPROM\n\r");
 			printf("\te\tErase EEPROM\n\r");
+#endif
 			printf("\tO\tEnable PRTPWR_OVERRIDE\n\r");
 			printf("\to\tDisable PRTPWR_OVERRIDE\n\r");
+#if (ALLOW_PEER_ERASE > 0)
 			printf("\tH\tRelease HUB RESET (high)\n\r");
 			printf("\th\tAssert HUB RESET (low)\n\r");
 			printf("\tw\tWrite single byte in EEPROM\n\r");
+#endif
 			printf("\tr\tRead single byte from EEPROM\n\r");
 		}
 		printf("\tX\tRelease peer SAM3 from reset\n\r");

-- 
To view, visit https://gerrit.osmocom.org/c/simtrace2/+/16577
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings

Gerrit-Project: simtrace2
Gerrit-Branch: master
Gerrit-Change-Id: I3071332d85e6168947384ddc230298d3293e4668
Gerrit-Change-Number: 16577
Gerrit-PatchSet: 1
Gerrit-Owner: laforge <laforge at osmocom.org>
Gerrit-MessageType: newchange
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20191214/1547750f/attachment.htm>