Change in ...osmo-msc[master]: doc/sequence_charts: fix naming of mncc_fsm to mncc_call

[laforge]

laforge has submitted this change and it was merged. ( https://gerrit.osmocom.org/c/osmo-msc/+/15059 )

Change subject: doc/sequence_charts: fix naming of mncc_fsm to mncc_call
......................................................................

doc/sequence_charts: fix naming of mncc_fsm to mncc_call

mncc_fsm.[hc] were renamed to mncc_call.[hc] during patch review, which failed
to carry through to this sequence chart.

Also fix the MNCC_ST_* to MNCC_CALL_ST_* and MNCC_EV_* to MNCC_CALL_EV_*.

Change-Id: I03ee1b43ab95dca3c43fdb9e92dc158aad5a4203
---
M doc/sequence_charts/Makefile.am
R doc/sequence_charts/mncc_call_fsm.msc
2 files changed, 14 insertions(+), 14 deletions(-)

Approvals:
  Jenkins Builder: Verified
  laforge: Looks good to me, approved



diff --git a/doc/sequence_charts/Makefile.am b/doc/sequence_charts/Makefile.am
index b667a6f..f1775c8 100644
--- a/doc/sequence_charts/Makefile.am
+++ b/doc/sequence_charts/Makefile.am
@@ -6,17 +6,17 @@
 EXTRA_DIST = \
 	inter_bsc_ho.msc \
 	inter_msc_ho.msc \
-	mncc_fsm.msc \
+	mncc_call_fsm.msc \
 	$(NULL)
 
 CLEANFILES = \
 	inter_bsc_ho.png \
 	inter_msc_ho.png \
-	mncc_fsm.png \
+	mncc_call_fsm.png \
 	$(NULL)
 
 msc: \
-	$(builddir)/mncc_fsm.png \
+	$(builddir)/mncc_call_fsm.png \
 	$(builddir)/inter_bsc_ho.png \
 	$(builddir)/inter_msc_ho.png \
 	$(NULL)
diff --git a/doc/sequence_charts/mncc_fsm.msc b/doc/sequence_charts/mncc_call_fsm.msc
similarity index 77%
rename from doc/sequence_charts/mncc_fsm.msc
rename to doc/sequence_charts/mncc_call_fsm.msc
index 45a77ca..4a14ff7 100644
--- a/doc/sequence_charts/mncc_fsm.msc
+++ b/doc/sequence_charts/mncc_call_fsm.msc
@@ -1,15 +1,15 @@
 msc {
 	hscale=3;
-	msc1[label="osmo-msc"], mncc1[label="MNCC FSM\n(osmo-msc mncc_fsm.c)"], sipcon1[label="osmo-sip-connector"], sip[label="PBX"], sipcon2[label="osmo-sip-connector"], mncc2[label="MNCC FSM\n(osmo-msc mncc_fsm.c)"], msc2[label="osmo-msc"];
+	msc1[label="osmo-msc"], mncc1[label="MNCC FSM\n(osmo-msc mncc_call.c)"], sipcon1[label="osmo-sip-connector"], sip[label="PBX"], sipcon2[label="osmo-sip-connector"], mncc2[label="MNCC FSM\n(osmo-msc mncc_call.c)"], msc2[label="osmo-msc"];
 
 	msc1 note sipcon1 [label="MO call"];
 	sipcon2 note msc2 [label="MT call"];
 
-	mncc1 abox mncc1 [label="MNCC_ST_NOT_STARTED"];
+	mncc1 abox mncc1 [label="MNCC_CALL_ST_NOT_STARTED"];
 	msc1 rbox msc1 [label="mncc_outgoing_start()"];
-	msc1 -> mncc1 [label="MNCC_EV_OUTGOING_START"];
+	msc1 -> mncc1 [label="MNCC_CALL_EV_OUTGOING_START"];
 
-	mncc1 abox mncc1 [label="MNCC_ST_OUTGOING_WAIT_PROCEEDING"];
+	mncc1 abox mncc1 [label="MNCC_CALL_ST_OUTGOING_WAIT_PROCEEDING"];
 	mncc1 => sipcon1 [label="MNCC_SETUP_IND
 			    \n callref, IMSI, called and calling number, SDP"];
 	sipcon1 => sip [label="SIP INVITE
@@ -22,7 +22,7 @@
 			\n callref, RTP IP address and port"];
 	mncc1 <= sipcon1 [label="MNCC_CALL_PROC_REQ
 			\n callref, RTP IP address and port"];
-	mncc1 abox mncc1 [label="MNCC_ST_OUTGOING_WAIT_COMPLETE"];
+	mncc1 abox mncc1 [label="MNCC_CALL_ST_OUTGOING_WAIT_COMPLETE"];
 
 	sip => sipcon2 [label="SIP INVITE
 			\n from, to, SDP"];
@@ -30,10 +30,10 @@
 	msc2 <= sipcon2 [label="MNCC_SETUP_REQ
 			\n callref, called and calling number
 			\n SDP"];
-	mncc2 abox mncc2 [label="MNCC_ST_NOT_STARTED"];
+	mncc2 abox mncc2 [label="MNCC_CALL_ST_NOT_STARTED"];
 	msc2 rbox msc2 [label="mncc_incoming_start()"];
-	msc2 -> mncc2 [label="MNCC_EV_INCOMING_START"];
-	mncc2 abox mncc2 [label="MNCC_ST_INCOMING_WAIT_COMPLETE"];
+	msc2 -> mncc2 [label="MNCC_CALL_EV_INCOMING_START"];
+	mncc2 abox mncc2 [label="MNCC_CALL_ST_INCOMING_WAIT_COMPLETE"];
 	mncc2 => sipcon2 [label="MNCC_CALL_CONF_IND
 			\n callref, bearer capabilities, cccap and IMSI, SDP?"];
 	mncc2 <= sipcon2 [label="MNCC_RTP_CREATE
@@ -67,14 +67,14 @@
 	mncc2 rbox mncc2 [label="mncc_rx_rtp_connect()"];
 	mncc2 <= sipcon2 [label="MNCC_SETUP_COMPL_REQ
 			\n callref"];
-	mncc2 abox mncc2 [label="MNCC_ST_TALKING"];
+	mncc2 abox mncc2 [label="MNCC_CALL_ST_TALKING"];
 
 	sipcon1 <= sip [label="SIP 200 OK INVITE"];
 	mncc1 <= sipcon1 [label="MNCC_SETUP_RSP
 			\n callref"];
 	mncc1 => sipcon1 [label="MNCC_SETUP_COMPL_IND
 			\n callref"];
-	mncc1 abox mncc1 [label="MNCC_ST_TALKING"];
+	mncc1 abox mncc1 [label="MNCC_CALL_ST_TALKING"];
 	sipcon1 => sip [label="SIP ACK"];
 
 	...;
@@ -84,7 +84,7 @@
 	mncc1 rbox mncc1 [label="mncc_release()"];
 	mncc1 => sipcon1 [label="MNCC_DISC_IND
 			\n callref and cause"];
-	mncc1 abox mncc1 [label="MNCC_ST_WAIT_RELEASE_ACK"];
+	mncc1 abox mncc1 [label="MNCC_CALL_ST_WAIT_RELEASE_ACK"];
 	sipcon1 => sip [label="SIP BYE"];
 	sipcon1 <= sip [label="SIP 200 OK"];
 	mncc1 <= sipcon1 [label="MNCC_REL_REQ

-- 
To view, visit https://gerrit.osmocom.org/c/osmo-msc/+/15059
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings

Gerrit-Project: osmo-msc
Gerrit-Branch: master
Gerrit-Change-Id: I03ee1b43ab95dca3c43fdb9e92dc158aad5a4203
Gerrit-Change-Number: 15059
Gerrit-PatchSet: 1
Gerrit-Owner: neels <nhofmeyr at sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: laforge <laforge at gnumonks.org>
Gerrit-MessageType: merged
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20190807/d9c1a9d3/attachment.htm>