Change in osmo-ttcn3-hacks[master]: add ttcn3 test suites slides from OsmoDevCon 2018

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.

Harald Welte gerrit-no-reply at lists.osmocom.org
Sun Sep 16 10:42:39 UTC 2018


Harald Welte has submitted this change and it was merged. ( https://gerrit.osmocom.org/10709 )

Change subject: add ttcn3 test suites slides from OsmoDevCon 2018
......................................................................

add ttcn3 test suites slides from OsmoDevCon 2018

Those slides are copied from http://git.gnumonks.org/laforge-slides/plain/2018/osmodevcon2018-ttcn3_test_suites/
to make sure they are more easily found.  It would be nice to convert
them into an actual asciidoc book with one chapter per test suite which
would be built from within this repository.   This way we can keep
documentation and code better in sync.

Change-Id: I8a0d66babc165678ec53a1ee1c673e93708b8b79
---
A doc/osmodevcon2018-ttcn3_test_suites.adoc
1 file changed, 296 insertions(+), 0 deletions(-)

Approvals:
  Jenkins Builder: Verified
  Harald Welte: Looks good to me, approved



diff --git a/doc/osmodevcon2018-ttcn3_test_suites.adoc b/doc/osmodevcon2018-ttcn3_test_suites.adoc
new file mode 100644
index 0000000..6eaee82
--- /dev/null
+++ b/doc/osmodevcon2018-ttcn3_test_suites.adoc
@@ -0,0 +1,296 @@
+Osmocom TTCN-3 Test Suites
+==========================
+:author:	Harald Welte <laforge at gnumonks.org>
+:copyright:	2018 by Harald Welte (License: CC-BY-SA)
+:backend:	slidy
+:max-width:	45em
+
+
+== Osmocom TTCN-3 Test Suites
+
+* developed in 2017+2018
+* compiled using Eclipse TITAN
+** uses just a command-line compiler + Makefiles
+** no IDE needed at all, don't let _Eclipse_ fool you
+* containerized in Docker
+* executed by Jenkins CI
+
+== Terminology
+
+ATS:: Abstract Test Suite
+MTC:: Main Test Component
+PTC:: Parallel Test Component
+IUT:: Implementation Under Test
+
+== Test Suite Philosophy
+
+* test one network element (our IUT)
+* test external behavior (3GPP and non-3GPP)
+* emulate entire environment from TTCN-3
+* don't reuse Osmocom C-code protocol implementations in the tests
+* test against independent TTCN-3 implementations!
+
+== What to test?
+
+* successful cases
+* erroneous cases (no answer, NACK, ...)
+** many difficult to reproduce with real phones/devices
+* load / resource exhaustion
+* spec compliance
+* focus on functionality actually relevant to IUT
+
+== Why TTCN-3 + TITAN
+
+* TTCN-3 specifically designed for telecom protocol testing
+* TITAN team released many telecom protocols in TTCN-3, such as
+** BSSAP, L3 (RR/MM/CC), SMS (CP/RP/TP), SS, M3UA, SCCP, GTP, NS, BSSGP, ...
+** shortens our test development cycle
+** permits us to test against known working industry implementations
+
+== Test suites for Osmocom CNI components
+
+* `osmo-bts`
+* `osmo-bsc`
+* `osmo-msc`
+* `osmo-mgw`
+* `osmo-hlr`
+* `osmo-sip-connector`
+* `osmo-sgsn`
+* `osmo-ggsn`
+
+== Test suites in progress
+
+* `osmo-pcu`
+* `osmo-bsc_nat`
+
+
+
+
+== BTS_Tests.ttcn
+
+* external interfaces
+** A-bis side: RSL (emulates BSC-side server)
+** Um side: L1CTL to control MS
+** PCU side: pcu_socket
+
+[graphviz]
+----
+digraph G {
+  rankdir=LR;
+  { rank=same; BTS, BSC};
+  BTS [label="IUT\nosmo-bts-trx",shape="box"];
+  ATS [label="ATS\nBTS_Tests.ttcn"];
+  BSC [label="osmo-bsc\nOML only"];
+  BTS -> fake_trx [label="bursts"];
+  fake_trx -> trxcon [label="bursts"];
+  trxcon -> ATS [label="bursts"];
+
+  BTS -> BSC [label="A-bis OML"];
+  BTS -> ATS [label="A-bis RSL"];
+
+  ATS -> BTS [label="pcu_sock"];
+  ATS -> BSC [label="VTY"];
+  ATS -> BTS [label="CTRL"];
+}
+----
+
+
+
+== BSC_Tests.ttcn
+
+* external interfaces
+** A-bis side: RSL (emulates BTS-side client)
+** A-side: BSSAP/SCCP/M3UA (emulates MSC-side)
+** MGW side: MGCP (emulates MGW side)
+
+[graphviz]
+----
+digraph G {
+  rankdir=LR;
+  { rank=same; BTS; STP; };
+  BSC [label="IUT\nosmo-bsc",shape="box"];
+  ATS [label="ATS\nBSC_Tests.ttcn"];
+  BTS [label="osmo-bts-omldummy\nOML only"];
+
+  BTS -> BSC [label="A-bis OML"];
+  ATS -> BSC [label="A-bis RSL"];
+  ATS -> BSC [label="CTRL"];
+  ATS -> BSC [label="VTY"];
+  ATS -> STP [label="A BSSAP\nSCCP/M3UA"];
+  BSC -> STP [label="A BSSAP\nSCCP/M3UA"];
+}
+----
+
+== MSC_Tests.ttcn
+
+* external interfaces
+** A: BSSAP/SCCP/M3UA (emulates BSC-side)
+** MNCC: MNCC/unix-domain (emulates ext. MNCC side)
+** MGW: MGCP (emulates MGW side)
+** GSUP (emulates HLR side)
+
+[graphviz]
+----
+digraph G {
+  rankdir=LR;
+  MSC [label="IUT\nosmo-msc",shape="box"];
+  ATS [label="ATS\nMSC_Tests.ttcn"];
+
+  ATS -> MSC [label="MNCC"];
+  ATS -> MSC [label="SMPP",style="dashed"];
+  ATS -> MSC [label="CTRL"];
+  ATS -> MSC [label="VTY"];
+  MSC -> ATS [label="GSUP"];
+  ATS -> STP [label="A BSSAP\nSCCP/M3UA"];
+  MSC -> STP [label="A BSSAP\nSCCP/M3UA"];
+}
+----
+
+
+== MGCP_Test.ttcn
+
+* external interfaces
+** MGCP (emulates call agent)
+** RTP (stream source/sink)
+
+[graphviz]
+----
+digraph G {
+  rankdir=LR;
+  MGW [label="IUT\nosmo-mgw",shape="box"];
+  ATS [label="ATS\nMGCP_Test.ttcn"];
+
+  ATS -> MGW [label="RTP"];
+  ATS -> MGW [label="MGCP"];
+  MGW -> ATS [label="RTP"];
+}
+----
+
+== HLR_Tests.ttcn
+
+* external interfaces
+** GSUP (emulates VLR/SGSN side)
+** VTY
+
+[graphviz]
+----
+digraph G {
+  rankdir=LR;
+  HLR [label="IUT\nosmo-hlr",shape="box"];
+  ATS [label="ATS\nHLR_Tests.ttcn"];
+
+  ATS -> HLR [label="GSUP"];
+  ATS -> HLR [label="VTY"];
+}
+----
+
+
+== SIP_Tests.ttcn
+
+* external interfaces
+** MNCC (emulates MSC side)
+** SIP (emulates SIP switch)
+** VTY
+
+[graphviz]
+----
+digraph G {
+  rankdir=LR;
+  SIP [label="SIP\nosmo-sip-connector",shape="box"];
+  ATS [label="ATS\nSIP_Tests.ttcn"];
+
+  ATS -> SIP [label="MNCC"];
+  ATS -> SIP [label="SIP"];
+  ATS -> SIP [label="VTY"];
+}
+----
+
+
+== SGSN_Tests.ttcn
+
+* external interfaces
+** Gb (emulates PCU side NS/BSSGP + MS)
+** GSUP (emulates HLR)
+** VTY
+
+[graphviz]
+----
+digraph G {
+  rankdir=LR;
+  SGSN [label="SGSN\nosmo-sgsn",shape="box"];
+  ATS [label="ATS\nSGSN_Tests.ttcn"];
+
+  ATS -> SGSN [label="Gb"];
+  SGSN-> ATS [label="Gp (GTP)"];
+  ATS -> SGSN [label="VTY"];
+}
+----
+
+
+== GGSN_Tests.ttcn
+
+* external interfaces
+** Gp: GTP (emulates SGSN)
+** Gi: IP (emulates Internet)
+
+[graphviz]
+----
+digraph G {
+  rankdir=LR;
+  GGSN [label="GGSN\nosmo-ggsn",shape="box"];
+  ATS [label="ATS\nGGSN_Tests.ttcn"];
+
+  ATS -> GGSN [label="Gp (GTP)"];
+  GGSN -> ATS [label="Gi (IP)"];
+  ATS -> GGSN [label="VTY"];
+}
+----
+
+
+
+== Dockerized Setup
+
+* one process per container
+* packages either
+** IUT (e.g. `osmo-bsc`)
+** ATS (compiled docker test suite)
+** other utility (e.g. `trxcon` or `osmo-bts-omldummy`)
+* why?
+** no need for local ip/network configuration
+** standardized / packaged setup on every machine
+** run older/newer versions of ATS against older/newer IUT
+
+== Jenkins CI Execution
+
+. update `docker-playground.git`
+.. contains `Dockerfile` for ATS + IUT
+. rebuild IUT container[s] (e.g. `osmo-bts-master`)
+.. git magic ensures re-build only if `osmo-bts.git` master changed
+. rebuild ATS container (e.g. `ttcn3-bts-test`)
+.. git magic ensures re-build only if `osmo-ttcn3-hacks.git` master changed
+. run `docker-playground/ttcn3-bts-test/jenkins.sh`
+.. creates docker network
+.. starts IUT + ATS docker containers
+.. collects test results
+
+
+== Jenkins CI Reporting
+
+* junit-xml generation
+* store artefacts
+** pcap file of every test case
+** ATS log file (TTCN-3 testsuite)
+** IUT log file[s] (`osmo-*.log`)
+** IUT config file[s] (`osmo-*.cfg`)
+* see https://jenkins.osmocom.org/jenkins/view/TTCN3/
+
+
+== Further Reading
+
+* http://git.osmocom.org/osmo-ttcn3-hacks/
+* http://git.osmocom.org/docker-playground/
+* http://osmocom.org/projects/cellular-infrastructure/wiki/Titan_TTCN3_Notes
+
+== EOF
+
+End of File

-- 
To view, visit https://gerrit.osmocom.org/10709
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings

Gerrit-Project: osmo-ttcn3-hacks
Gerrit-Branch: master
Gerrit-MessageType: merged
Gerrit-Change-Id: I8a0d66babc165678ec53a1ee1c673e93708b8b79
Gerrit-Change-Number: 10709
Gerrit-PatchSet: 2
Gerrit-Owner: Harald Welte <laforge at gnumonks.org>
Gerrit-Reviewer: Harald Welte <laforge at gnumonks.org>
Gerrit-Reviewer: Jenkins Builder (1000002)
Gerrit-CC: Vadim Yanitskiy <axilirator at gmail.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20180916/ac492a4c/attachment.htm>


More information about the gerrit-log mailing list