This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Neels Hofmeyr gerrit-no-reply at lists.osmocom.orgNeels Hofmeyr has uploaded this change for review. ( https://gerrit.osmocom.org/10871
Change subject: ts,lchan_fsm: do not attempt to allocate CBCH subslots
......................................................................
ts,lchan_fsm: do not attempt to allocate CBCH subslots
In case a given channel combination contains a CBCH, it replaces sub-slot 2
with a CBCH, i.e. we must not attempt to allocate the same for SDCCH.
On timeslot initialization, immediately place such an lchan FSM into new state
LCHAN_ST_CBCH, so that it never appears unused and never is picked during
lchan_select().
Verified by configuring CBCH timeslots and watching 'show lchan summary'.
Immediately after RSL and OML are up, these pchan types show lchan 2 in state
CBCH:
BTS 0, TRX 0, Timeslot 0 CCCH+SDCCH4+CBCH, Lchan 2, Type NONE, State CBCH - L1 MS Power: 0 dBm RXL-FULL-dl: -110 dBm RXL-FULL-ul: -110 dBm
BTS 0, TRX 0, Timeslot 1 SDCCH8+CBCH, Lchan 2, Type NONE, State CBCH - L1 MS Power: 0 dBm RXL-FULL-dl: -110 dBm RXL-FULL-ul: -110 dBm
With a 'phys_chan_config ccch+sdcch4+cbch' and three phones simultaneously
requesting USSD, I see:
BTS 0, TRX 0, Timeslot 0 CCCH+SDCCH4+CBCH, Lchan 0, Type SDCCH, State ESTABLISHED - L1 MS Power: 14 dBm RXL-FULL-dl: -53 dBm RXL-FULL-ul: -47 dBm
BTS 0, TRX 0, Timeslot 0 CCCH+SDCCH4+CBCH, Lchan 1, Type SDCCH, State ESTABLISHED - L1 MS Power: 30 dBm RXL-FULL-dl: -47 dBm RXL-FULL-ul: -47 dBm
BTS 0, TRX 0, Timeslot 0 CCCH+SDCCH4+CBCH, Lchan 2, Type NONE, State CBCH - L1 MS Power: 0 dBm RXL-FULL-dl: -110 dBm RXL-FULL-ul: -110 dBm
BTS 0, TRX 0, Timeslot 0 CCCH+SDCCH4+CBCH, Lchan 3, Type SDCCH, State ESTABLISHED - L1 MS Power: 16 dBm RXL-FULL-dl: -47 dBm RXL-FULL-ul: -47 dBm
With 'phys_chan_config SDCCH8+CBCH' and three phones simultaneously attaching,
I see:
BTS 0, TRX 0, Timeslot 1 SDCCH8+CBCH, Lchan 0, Type SDCCH, State WAIT_RLL_RTP_ESTABLISH - L1 MS Power: 0 dBm RXL-FULL-dl: -110 dBm RXL-FULL-ul: -110 dBm
BTS 0, TRX 0, Timeslot 1 SDCCH8+CBCH, Lchan 1, Type SDCCH, State WAIT_RLL_RTP_ESTABLISH - L1 MS Power: 0 dBm RXL-FULL-dl: -110 dBm RXL-FULL-ul: -110 dBm
BTS 0, TRX 0, Timeslot 1 SDCCH8+CBCH, Lchan 2, Type NONE, State CBCH - L1 MS Power: 0 dBm RXL-FULL-dl: -110 dBm RXL-FULL-ul: -110 dBm
BTS 0, TRX 0, Timeslot 1 SDCCH8+CBCH, Lchan 3, Type SDCCH, State WAIT_RLL_RTP_ESTABLISH - L1 MS Power: 0 dBm RXL-FULL-dl: -110 dBm RXL-FULL-ul: -110 dBm
BTS 0, TRX 0, Timeslot 1 SDCCH8+CBCH, Lchan 4, Type SDCCH, State WAIT_RLL_RTP_ESTABLISH - L1 MS Power: 0 dBm RXL-FULL-dl: -110 dBm RXL-FULL-ul: -110 dBm
BTS 0, TRX 0, Timeslot 1 SDCCH8+CBCH, Lchan 5, Type SDCCH, State WAIT_RLL_RTP_ESTABLISH - L1 MS Power: 0 dBm RXL-FULL-dl: -110 dBm RXL-FULL-ul: -110 dBm
BTS 0, TRX 0, Timeslot 1 SDCCH8+CBCH, Lchan 6, Type SDCCH, State WAIT_RLL_RTP_ESTABLISH - L1 MS Power: 0 dBm RXL-FULL-dl: -110 dBm RXL-FULL-ul: -110 dBm
BTS 0, TRX 0, Timeslot 1 SDCCH8+CBCH, Lchan 7, Type SDCCH, State WAIT_RLL_RTP_ESTABLISH - L1 MS Power: 0 dBm RXL-FULL-dl: -110 dBm RXL-FULL-ul: -110 dBm
i.e. in all cases the CBCH lchan remains occupied and is not allocated as
SDCCH.
Detaching and re-attaching the BTS reliably brings back the CBCH state. Also
verified that changing the osmo-bsc config from telnet vty and dropping oml
followed by the BTS re-attaching brings back the CBCH state.
Change-Id: I2bafc5f696e818e38f8907ad0c8f38494df0623d
---
M include/osmocom/bsc/lchan_fsm.h
M src/osmo-bsc/lchan_fsm.c
M src/osmo-bsc/timeslot_fsm.c
3 files changed, 16 insertions(+), 0 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-bsc refs/changes/71/10871/1
diff --git a/include/osmocom/bsc/lchan_fsm.h b/include/osmocom/bsc/lchan_fsm.h
index 35b8847..9fbf9b3 100644
--- a/include/osmocom/bsc/lchan_fsm.h
+++ b/include/osmocom/bsc/lchan_fsm.h
@@ -14,6 +14,7 @@
enum lchan_fsm_state {
LCHAN_ST_UNUSED,
+ LCHAN_ST_CBCH, /*< Blocked by CBCH channel combination, not usable as SDCCH. */
LCHAN_ST_WAIT_TS_READY,
LCHAN_ST_WAIT_ACTIV_ACK, /*< After RSL Chan Act Ack, lchan is active but RTP not configured. */
LCHAN_ST_WAIT_RLL_RTP_ESTABLISH,
diff --git a/src/osmo-bsc/lchan_fsm.c b/src/osmo-bsc/lchan_fsm.c
index 1ef7869..c80d8a1 100644
--- a/src/osmo-bsc/lchan_fsm.c
+++ b/src/osmo-bsc/lchan_fsm.c
@@ -1035,6 +1035,13 @@
,
.out_state_mask = 0
| S(LCHAN_ST_WAIT_TS_READY)
+ | S(LCHAN_ST_CBCH)
+ ,
+ },
+ [LCHAN_ST_CBCH] = {
+ .name = "CBCH",
+ .out_state_mask = 0
+ | S(LCHAN_ST_UNUSED)
,
},
[LCHAN_ST_WAIT_TS_READY] = {
diff --git a/src/osmo-bsc/timeslot_fsm.c b/src/osmo-bsc/timeslot_fsm.c
index 56b3357..865976e 100644
--- a/src/osmo-bsc/timeslot_fsm.c
+++ b/src/osmo-bsc/timeslot_fsm.c
@@ -295,6 +295,14 @@
T_CHAN_ACT_DEACT);
break;
+ case GSM_PCHAN_CCCH_SDCCH4_CBCH:
+ case GSM_PCHAN_SDCCH8_SACCH8C_CBCH:
+ /* For any pchans containing a CBCH, lchan[2] is reserved for CBCH and cannot be
+ * allocated for SDCCH. */
+ OSMO_ASSERT(ts->lchan[2].fi);
+ osmo_fsm_inst_state_chg(ts->lchan[2].fi, LCHAN_ST_CBCH, 0, 0);
+ break;
+
default:
/* nothing to do */
break;
--
To view, visit https://gerrit.osmocom.org/10871
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-bsc
Gerrit-Branch: master
Gerrit-MessageType: newchange
Gerrit-Change-Id: I2bafc5f696e818e38f8907ad0c8f38494df0623d
Gerrit-Change-Number: 10871
Gerrit-PatchSet: 1
Gerrit-Owner: Neels Hofmeyr <nhofmeyr at sysmocom.de>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20180910/07786369/attachment.htm>