Build failed in Jenkins: master-osmo-bsc » a1=default,a2=default,a3=default,osmocom-master-debian9 #3965

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.

jenkins at lists.osmocom.org jenkins at lists.osmocom.org
Tue Oct 30 00:55:15 UTC 2018 

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bsc/a1=default,a2=default,a3=default,label=osmocom-master-debian9/3965/display/redirect>

------------------------------------------
[...truncated 847.75 KB...]
  list
  write terminal
  write file
  write memory
  write
  show running-config
  exit
  end
  network country code <1-999>
  mobile network code <0-999>
  encryption a5 <0-3> [<0-3>] [<0-3>] [<0-3>]
  timezone <-19-19> (0|15|30|45)
  timezone <-19-19> (0|15|30|45) <0-2>
  no timezone
  periodic location update <6-1530>
  no periodic location update
  meas-feed destination ADDR <0-65535>
  meas-feed scenario NAME
  timer TNNNN (default|<1-65535>)
  neci (0|1)
  paging any use tch (0|1)
  bts <0-255>
  handover (0|1|default)
  handover algorithm (1|2|default)
  handover1 window rxlev averaging (<1-10>|default)
  handover1 window rxqual averaging (<1-10>|default)
  handover1 window rxlev neighbor averaging (<1-10>|default)
  handover1 power budget interval (<1-99>|default)
  handover1 power budget hysteresis (<0-999>|default)
  handover1 maximum distance (<0-9999>|default)
  handover2 window rxlev averaging (<1-10>|default)
  handover2 window rxqual averaging (<1-10>|default)
  handover2 window rxlev neighbor averaging (<1-10>|default)
  handover2 power budget interval (<1-99>|default)
  handover2 power budget hysteresis (<0-999>|default)
  handover2 maximum distance (<0-9999>|default)
  handover2 assignment (0|1|default)
  handover2 tdma-measurement (full|subset|default)
  handover2 min rxlev (<-110--50>|default)
  handover2 min rxqual (<0-7>|default)
  handover2 afs-bias rxlev (<0-20>|default)
  handover2 afs-bias rxqual (<0-7>|default)
  handover2 min-free-slots tch/f (<0-9999>|default)
  handover2 min-free-slots tch/h (<0-9999>|default)
  handover2 max-handovers (<1-9999>|default)
  handover2 penalty-time max-distance (<0-99999>|default)
  handover2 penalty-time failed-ho (<0-99999>|default)
  handover2 penalty-time failed-assignment (<0-99999>|default)
  handover2 retries (<0-9>|default)
  handover2 congestion-check (disabled|<1-999>|now)

OsmoBSC(config-net)# meas-feed destination 127.0.0.23 4223

OsmoBSC(config-net)# meas-feed scenario foo23

OsmoBSC(config-net)# show running-config
<0004> bsc_init.c:49 shutting down OML for BTS 0

Current configuration:
!
!
log stderr
 logging filter all 1
 logging color 1
 logging print category 0
 logging timestamp 0
 logging print file 1
 logging level rll notice
 logging level mm notice
 logging level rr notice
 logging level rsl notice
 logging level nm info
 logging level pag notice
 logging level meas notice
 logging level msc notice
 logging level ho notice
 logging level hodec notice
 logging level ref notice
 logging level nat notice
 logging level ctrl notice
 logging level filter debug
 logging level pcu debug
 logging level lcls notice
 logging level chan notice
 logging level ts notice
 logging level as notice
 logging level lglobal notice
 logging level llapd notice
 logging level linp notice
 logging level lmux notice
 logging level lmi notice
 logging level lmib notice
 logging level lsms notice
 logging level lctrl notice
 logging level lgtp notice
 logging level lstats notice
 logging level lgsup notice
 logging level loap notice
 logging level lss7 notice
 logging level lsccp notice
 logging level lsua notice
 logging level lm3ua notice
 logging level lmgcp notice
 logging level ljibuf notice
!
stats interval 5
!
line vty
 no login
!
e1_input
 e1_line 0 driver ipa
 e1_line 0 port 0
 no e1_line 0 keepalive
cs7 instance 0
 point-code 0.23.3
network
 network country code 901
 mobile network code 70
 encryption a5 1 3
 neci 0
 paging any use tch 0
 meas-feed destination 127.0.0.23 4223
 meas-feed scenario foo23
 bts 0
  type sysmobts
  band DCS1800
  cell_identity 0
  location_area_code 23
  base_station_id_code 63
  ms max power 15
  cell reselection hysteresis 4
  rxlev access min 0
  radio-link-timeout 32
  channel allocator ascending
  rach tx integer 9
  rach max transmission 7
  channel-descrption attach 1
  channel-descrption bs-pa-mfrms 5
  channel-descrption bs-ag-blks-res 1
  no access-control-class-ramping
  access-control-class-ramping-step-interval dynamic
  access-control-class-ramping-step-size 1
  early-classmark-sending forbidden
  early-classmark-sending-3g allowed
  ip.access unit_id 1800 0
  oml ip.access stream_id 255 line 0
  neighbor-list mode automatic
  codec-support fr hr efr amr
  amr tch-f modes 1 2 6 7
  amr tch-f threshold ms 32 32 32
  amr tch-f hysteresis ms 8 8 8
  amr tch-f threshold bts 32 32 32
  amr tch-f hysteresis bts 8 8 8
  amr tch-f start-mode auto
  amr tch-h modes 1 2 4 5
  amr tch-h threshold ms 32 32 32
  amr tch-h hysteresis ms 8 8 8
  amr tch-h threshold bts 32 32 32
  amr tch-h hysteresis bts 8 8 8
  amr tch-h start-mode auto
  gprs mode none
  no force-combined-si
  trx 0
   rf_locked 0
   arfcn 868
   nominal power 23
   max_power_red 0
   rsl e1 tei 0
   timeslot 0
    phys_chan_config CCCH+SDCCH4
    hopping enabled 0
   timeslot 1
    phys_chan_config SDCCH8
    hopping enabled 0
   timeslot 2
    phys_chan_config TCH/F
    hopping enabled 0
   timeslot 3
    phys_chan_config TCH/F
    hopping enabled 0
   timeslot 4
    phys_chan_config TCH/F
    hopping enabled 0
   timeslot 5
    phys_chan_config TCH/F
    hopping enabled 0
   timeslot 6
    phys_chan_config TCH/F
    hopping enabled 0
   timeslot 7
    phys_chan_config TCH/F
    hopping enabled 0
msc 0
 ip.access rtp-base 4000
 no bsc-welcome-text
 no bsc-msc-lost-text
 no bsc-grace-text
 codec-list hr3
 type normal
 allow-emergency deny
 amr-config 12_2k forbidden
 amr-config 10_2k forbidden
 amr-config 7_95k forbidden
 amr-config 7_40k forbidden
 amr-config 6_70k forbidden
 amr-config 5_90k allowed
 amr-config 5_15k forbidden
 amr-config 4_75k forbidden
 asp-protocol m3ua
 lcls-mode disabled
 lcls-codec-mismatch forbidden
bsc
 mid-call-timeout 0
 no missing-msc-text
end
logging level cc (debug|info|notice|error|fatal)
logging level mgcp (debug|info|notice|error|fatal)
signal 15 received
Terminating took 2.679s

RESULTS:
pass: ./handover_cfg.vty
FAIL: ./neighbor_ident.vty
pass: ./osmo-bsc.vty

Makefile:696: recipe for target 'vty-test' failed
make[6]: Leaving directory '/build/tests'
Makefile:683: recipe for target 'python-tests' failed
make[6]: *** [vty-test] Error 1
make[5]: *** [python-tests] Error 2
make[5]: Leaving directory '/build/tests'
make[4]: *** [check-local] Error 2
Makefile:702: recipe for target 'check-local' failed
make[4]: Leaving directory '/build/tests'
make[3]: *** [check-am] Error 2
Makefile:545: recipe for target 'check-am' failed
make[3]: Leaving directory '/build/tests'
make[2]: *** [check-recursive] Error 1
Makefile:397: recipe for target 'check-recursive' failed
make[2]: Leaving directory '/build/tests'
make[1]: *** [check-recursive] Error 1
Makefile:434: recipe for target 'check-recursive' failed
make[1]: Leaving directory '/build'
Makefile:725: recipe for target 'check' failed
make: *** [check] Error 2
+ cat-testlogs.sh
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE

More information about the gerrit-log mailing list