This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Neels Hofmeyr gerrit-no-reply at lists.osmocom.orgNeels Hofmeyr has submitted this change and it was merged. ( https://gerrit.osmocom.org/11965 )
Change subject: remove OsmoMGW files (now avail in osmo-mgw.git)
......................................................................
remove OsmoMGW files (now avail in osmo-mgw.git)
Files were added in osmo-mgw.git Change-Id
I504f05a49721f2dfe105b6c5fd1995c4e7a0be9c
Depends: osmo-mgw.git Change-Id I504f05a49721f2dfe105b6c5fd1995c4e7a0be9c
Related: OS#3385
Change-Id: I793a7150b676837cfa8591f7504872b04d4b1f7f
---
M Makefile.am
D OsmoMGW/Makefile.am
D OsmoMGW/chapters/configuration.adoc
D OsmoMGW/chapters/counters.adoc
D OsmoMGW/chapters/counters_generated.adoc
D OsmoMGW/chapters/mgcp_extensions.adoc
D OsmoMGW/chapters/overview.adoc
D OsmoMGW/chapters/running.adoc
D OsmoMGW/osmomgw-usermanual-docinfo.xml
D OsmoMGW/osmomgw-usermanual.adoc
D OsmoMGW/osmomgw-vty-reference.xml
D OsmoMGW/vty/mgw_vty_additions.xml
D OsmoMGW/vty/mgw_vty_reference.xml
M configure.ac
14 files changed, 0 insertions(+), 2,050 deletions(-)
Approvals:
Jenkins Builder: Verified
Pau Espin Pedrol: Looks good to me, but someone else must approve
diff --git a/Makefile.am b/Makefile.am
index d13b2e1..f86e6fc 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -8,7 +8,6 @@
SUBDIRS = tests \
OsmoGSMTester \
OsmoMGCP \
- OsmoMGW \
OsmoNAT \
OsmoNITB \
OsmoPCU \
diff --git a/OsmoMGW/Makefile.am b/OsmoMGW/Makefile.am
deleted file mode 100644
index 4c0e469..0000000
--- a/OsmoMGW/Makefile.am
+++ /dev/null
@@ -1,15 +0,0 @@
-OSMO_GSM_MANUALS_DIR = $(top_srcdir)
-EXTRA_DIST = osmomgw-usermanual.adoc \
- osmomgw-usermanual-docinfo.xml \
- osmomgw-vty-reference.xml \
- chapters \
- vty
-
-ASCIIDOC = osmomgw-usermanual.adoc
-ASCIIDOC_DEPS = $(srcdir)/chapters/*.adoc
-include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.asciidoc.inc
-
-VTY_REFERENCE = osmomgw-vty-reference.xml
-include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.vty-reference.inc
-
-include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.common.inc
diff --git a/OsmoMGW/chapters/configuration.adoc b/OsmoMGW/chapters/configuration.adoc
deleted file mode 100644
index c398f25..0000000
--- a/OsmoMGW/chapters/configuration.adoc
+++ /dev/null
@@ -1,57 +0,0 @@
-== Configuring OsmoMGW
-
-A basic configation of OsmoMGW mainly consists of specifying the IP address
-and port on which to listen to MGCP commands, but changing the port range at
-which the RTP streams terminate as well as limiting operation to a single call
-agent can be done as well as changing the number of endpoints.
-
-=== Configuring MGCP
-
-By default OsmoMGW listens for MGCP on port 2427 on any IP address. If a call
-agent address is configured then OsmoMGW will only answer MGCP commands from
-that IP port 2727, otherwise all sources are handled. A domain can be
-specified
-
-.Example: MGCP configuration
-----
-OsmoMGW(config-mgcp)# bind ip 127.0.0.1
-OsmoMGW(config-mgcp)# bind port 2427
-OsmoMGW(config-mgcp)# call-agent ip 127.0.0.1
-OsmoMGW(config-mgcp)# domain mgw-bsc
-OsmoMGW(config-mgcp)# local ip 127.0.0.1
-----
-
-=== Configuring the trunk
-
-The first trunk (trunk 0) is considered a virtual trunk in OsmoMGW. All
-endpoints of type "rtpbridge" are routed here. The virtual trunk is configured
-in the config-mgcp context.
-
-All other trunks are configured in the config-mgcp-trunk context, but the
-commands used are identical. Right now trunks are considered only for ds/e1
-type endpoints which are not yet implemented. Don't use trunks other than the
-"virtual" trunk 0.
-
-.Example: MGCP trunk configuration
-----
-OsmoMGW(config-mgcp)# number endpoints 63 <1>
-OsmoMGW(config-mgcp)# rtp bind-ip 10.0.0.1 <2>
-OsmoMGW(config-mgcp)# rtp port-range 12000-14000 <3>
-----
-<1> Maximum number of endpoints that can be allocated at once
-<2> Use this IP when binding RTP endpoints
-<3> Use ports in this range when binding RTP endpoints
-
-There are some options to tweak how RTP forwarding behaves in OsmoMGW:
-
-.Example: MGCP trunk rtp options
-----
-OsmoMGW(config-mgcp)# rtp keep-alive 30 <1>
-OsmoMGW(config-mgcp)# rtp-patch ssrc <2>
-OsmoMGW(config-mgcp)# rtp-patch timestamp <3>
-----
-<1> Send dummy UDP packets periodically to RTP destination
-<2> Hide SSRC changes
-<3> Ensure RTP timestamp is aligned with frame duration
-
-
diff --git a/OsmoMGW/chapters/counters.adoc b/OsmoMGW/chapters/counters.adoc
deleted file mode 100644
index 7fbb10c..0000000
--- a/OsmoMGW/chapters/counters.adoc
+++ /dev/null
@@ -1,4 +0,0 @@
-[[counters]]
-== Counters
-
-include::./counters_generated.adoc[]
diff --git a/OsmoMGW/chapters/counters_generated.adoc b/OsmoMGW/chapters/counters_generated.adoc
deleted file mode 100644
index 20a4dec..0000000
--- a/OsmoMGW/chapters/counters_generated.adoc
+++ /dev/null
@@ -1,14 +0,0 @@
-
-// autogenerated by show asciidoc counters
-These counters and their description based on OsmoMGW 1.3.0.34-9cd52 (OsmoMGW).
-
-=== Rate Counters
-
-// generating tables for rate_ctr_group
-== Osmo Stat Items
-
-// generating tables for osmo_stat_items
-== Osmo Counters
-
-// generating tables for osmo_counters
-// there are no ungrouped osmo_counters
diff --git a/OsmoMGW/chapters/mgcp_extensions.adoc b/OsmoMGW/chapters/mgcp_extensions.adoc
deleted file mode 100644
index 86ff643..0000000
--- a/OsmoMGW/chapters/mgcp_extensions.adoc
+++ /dev/null
@@ -1,68 +0,0 @@
-== MGCP Extensions
-
-The MGCP protocol is extendable. The following non-standard extensions are
-understood by OsmoMGW.
-
-=== `X-Osmo-IGN`
-
-`X-Osmo-IGN` indicates to OsmoMGW that specific items of an endpoint should be
-ignored, so that it is lenient on mismatching values that would normally
-indicate collisions or configuration errors.
-
-==== `X-Osmo-IGN` Format
-
-The value part of X-Osmo-IGN must be one or more items separated by one or more
-spaces. Each item consists of one or more non-whitespace characters.
-
-.Example: `X-Osmo-IGN` format with three ficticious items "X", "abc" and "123".
-----
-X-Osmo-IGN: X abc 123
-----
-
-`X-Osmo-IGN` must be issued in the MGCP section (typically as its last item),
-before the SDP section starts.
-
-==== Supported `X-Osmo-IGN` Items
-
-Currently, the following `X-Osmo-IGN` items are supported:
-
-* `C`: ignore CallID mismatches, i.e. differing "C" values between connections
- on the same endpoint.
-
-.Note:
-`X-Osmo-IGN` does not support ignoring mismatches on the domain part of
-an endpoint name, e.g. ignoring a mismatch on "example.com" in
-`rtpbridge/123abc at example.com`. Instead, you may globally configure OsmoMGW
-with `mgcp` / `domain *` to permit all domain parts.
-
-===== `X-Osmo-IGN: C`
-
-By default, OsmoMGW verifies that all CallIDs ("C" values) match for all
-connections on any one given endpoint. To ignore CallID mismatches, pass a `C`
-in the `X-Osmo-IGN` header, for the first or the second `CRCX` on an endpoint.
-When the `X-Osmo-IGN: C` is sent for any one `CRCX` on an endpoint, CallID
-mismatches will be ignored for that and all subsequent messages for that
-endpoint. Hence this header only needs to be included once per endpoint, in any
-`CRCX` message that precedes or coincides with a CallID mismatch.
-
-This is particularly useful for a BSC that is connected to an A/SCCPlite MSC,
-where the BSC and MSC each are expected to configure their respective own
-connection on a shared endpoint. For A/SCCPlite, it is impossible for the BSC
-to know the CallID that the MSC will use, so CallID mismatches are inevitable.
-See also OsmoBSC, which will by default pass the `X-Osmo-IGN: C` header for
-endpoints associated with an A/SCCPlite MSC.
-
-.Example: `CRCX` message that instructs OsmoMGW to ignore CallID mismatches
-----
-CRCX 2 rtpbridge/123abc at mgw MGCP 1.0
-M: recvonly
-C: 2
-L: p:20
-X-Osmo-IGN: C
-
-v=0
-c=IN IP4 123.12.12.123
-m=audio 5904 RTP/AVP 97
-a=rtpmap:97 GSM-EFR/8000
-a=ptime:40
-----
diff --git a/OsmoMGW/chapters/overview.adoc b/OsmoMGW/chapters/overview.adoc
deleted file mode 100644
index 6a8f3e3..0000000
--- a/OsmoMGW/chapters/overview.adoc
+++ /dev/null
@@ -1,100 +0,0 @@
-[[overview]]
-== Overview
-
-This manual should help you getting started with OsmoMGW. It will cover
-aspects of configuring and running the media gateway.
-
-[[intro_overview]]
-=== About OsmoMGW
-
-OsmoMGW is the Osmocom implementation of a media gateway to handle user
-plane (voice) traffic in cellular networks. It can connect and optionally
-transcode RTP voice streams between different network elements such as BTSs
-and external entities like SIP. It is typically co-located with both OsmoBSC
-and OsmoMSC and controlled by them via MGCP, the Media Gateway Control
-Protocol.
-
-[[fig-bsc]]
-.OsmoMGW used with OsmoBSC
-[graphviz]
-----
-digraph G {
- rankdir = LR;
- OsmoBTS -> OsmoBSC [label="Abis/IP"];
- OsmoBSC -> OsmoMSC [label="3GPP AoIP"];
- OsmoBSC -> OsmoMGW [label="MGCP"];
- OsmoBTS -> OsmoMGW [label="RTP",dir=both];
- OsmoMGW -> OsmoMSC [label="RTP",dir=both];
- {rank=same OsmoBSC OsmoMGW}
- OsmoMGW [color=red];
-}
-----
-
-[[fig-msc]]
-.OsmoMGW used with OsmoMSC
-[graphviz]
-----
-digraph G {
- rankdir = LR;
- BTS -> BSC [label="Abis"];
- BSC -> OsmoMSC [label="3GPP AoIP"];
- OsmoMSC -> OsmoMGW [label="MGCP"];
- BSC -> OsmoMGW [label="RTP",dir=both];
- OsmoMSC -> OsmoSIP [label="MNCC"];
- OsmoSIP -> PBX [label="SIP Trunk"];
- OsmoMGW -> PBX [label="RTP",dir=both];
- {rank=same OsmoMSC OsmoMGW}
- OsmoSIP [label="osmo-sip-connector"];
- OsmoMGW [color=red];
-
- hNodeB -> OsmoHNBGW [label="Iuh"];
- OsmoHNBGW -> OsmoMSC [label="IuCS"];
- hNodeB -> OsmoMGW [label="RTP",dir=both];
-}
-----
-
-=== Software Components
-
-OsmoMGW contains a variety of different software components, which we’ll
-quickly describe in this section.
-
-==== MGCP Implementation
-
-OsmoMGW brings its own MGCP implementation through which OsmoMGW is
-controlled.
-
-The commands implemented are CRCX, MDCX, DLCX and RSIP. The command AUEP is
-implemented as a stub and will simply respond with OK.
-
-==== RTP implementation
-
-Support for IuUP which is used in 3G cells is quite lacking at the moment.
-3G<->3G and 2G<->2G calls should work, but 3G<->2G does not.
-
-==== Audio transcoder
-
-Transcoding is currently not supported in OsmoMGW.
-
-=== Limitations
-
-Osmux is not yet supported in OsmoMGW.
-
-At the moment (July 2018), OsmoMGW only implements RTP proxy / RTP bridge
-type endpoints, to each of which two RTP connections can be established.
-We are planning to add endpoint types for:
-
-- classic E1/T1 timeslots (64kBps alaw/ulaw)
-- classic E1/T1 16k sub-slots with TRAU frames for classic BTS support
-- announcement/playout end-points
-- conference endpoints
-
-=== Additional resources
-
-You can find the OsmoMGW issue tracker and wiki online at
-
-- https://osmocom.org/projects/osmomgw
-- https://osmocom.org/projects/osmomgw/wiki
-
-RFC 3435 for MGCP is located at
-
-- https://tools.ietf.org/html/rfc3435
diff --git a/OsmoMGW/chapters/running.adoc b/OsmoMGW/chapters/running.adoc
deleted file mode 100644
index 8565ea5..0000000
--- a/OsmoMGW/chapters/running.adoc
+++ /dev/null
@@ -1,25 +0,0 @@
-== Running OsmoMGW
-
-The OsmoMGW executable (`osmo-mgw`) offers the following command-line
-arguments:
-
-=== SYNOPSIS
-
-*osmo-mgw* [-h|-V] [-D] [-c 'CONFIGFILE'] [-s]
-
-=== OPTIONS
-
-*-h, --help*::
- Print a short help message about the supported options
-*-V, --version*::
- Print the compile-time version number of the OsmoBTS program
-*-D, --daemonize*::
- Fork the process as a daemon into background.
-*-c, --config-file 'CONFIGFILE'*::
- Specify the file and path name of the configuration file to be
- used. If none is specified, use `osmo-mgw.cfg` in the current
- working directory.
-*-s, --disable-color*::
- Disable colors for logging to stderr. This has mostly been
- deprecated by VTY based logging configuration, see <<logging>>
- for more information.
diff --git a/OsmoMGW/osmomgw-usermanual-docinfo.xml b/OsmoMGW/osmomgw-usermanual-docinfo.xml
deleted file mode 100644
index d801c9b..0000000
--- a/OsmoMGW/osmomgw-usermanual-docinfo.xml
+++ /dev/null
@@ -1,47 +0,0 @@
-<revhistory>
- <revision>
- <revnumber>1</revnumber>
- <date>July 24th, 2018</date>
- <authorinitials>DW</authorinitials>
- <revremark>
- Initial version
- </revremark>
- </revision>
-</revhistory>
-
-<authorgroup>
- <author>
- <firstname>Daniel</firstname>
- <surname>Willmann</surname>
- <email>dwillmann at sysmocom.de</email>
- <authorinitials>DW</authorinitials>
- <affiliation>
- <shortaffil>sysmocom</shortaffil>
- <orgname>sysmocom - s.f.m.c. GmbH</orgname>
- </affiliation>
- </author>
-</authorgroup>
-
-<copyright>
- <year>2018</year>
- <holder>sysmocom - s.f.m.c. GmbH</holder>
-</copyright>
-
-<legalnotice>
- <para>
- Permission is granted to copy, distribute and/or modify this
- document under the terms of the GNU Free Documentation License,
- Version 1.3 or any later version published by the Free Software
- Foundation; with the Invariant Sections being just 'Foreword',
- 'Acknowledgements' and 'Preface', with no Front-Cover Texts,
- and no Back-Cover Texts. A copy of the license is included in
- the section entitled "GNU Free Documentation License".
- </para>
- <para>
- The Asciidoc source code of this manual can be found at
- <ulink url="http://git.osmocom.org/osmo-gsm-manuals/">
- http://git.osmocom.org/osmo-gsm-manuals/
- </ulink>
- </para>
-</legalnotice>
-
diff --git a/OsmoMGW/osmomgw-usermanual.adoc b/OsmoMGW/osmomgw-usermanual.adoc
deleted file mode 100644
index b0bc83d..0000000
--- a/OsmoMGW/osmomgw-usermanual.adoc
+++ /dev/null
@@ -1,33 +0,0 @@
-:gfdl-enabled:
-:program-name: OsmoMGW
-
-OsmoMGW User Manual
-====================
-Daniel Willmann <dwillmann at sysmocom.de>
-
-
-include::./common/chapters/preface.adoc[]
-
-include::{srcdir}/chapters/overview.adoc[]
-
-include::{srcdir}/chapters/running.adoc[]
-
-include::./common/chapters/vty.adoc[]
-
-include::./common/chapters/logging.adoc[]
-
-include::{srcdir}/chapters/configuration.adoc[]
-
-include::{srcdir}/chapters/mgcp_extensions.adoc[]
-
-//include::{srcdir}/chapters/counters.adoc[]
-
-include::./common/chapters/port_numbers.adoc[]
-
-include::./common/chapters/bibliography.adoc[]
-
-include::./common/chapters/glossary.adoc[]
-
-include::./common/chapters/gfdl.adoc[]
-
-
diff --git a/OsmoMGW/osmomgw-vty-reference.xml b/OsmoMGW/osmomgw-vty-reference.xml
deleted file mode 100644
index 334453e..0000000
--- a/OsmoMGW/osmomgw-vty-reference.xml
+++ /dev/null
@@ -1,38 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
- ex:ts=2:sw=42sts=2:et
- -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
--->
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML 5.0//EN"
-"http://docbook.org/xml/5.0/dtd/docbook.dtd" [
-<!ENTITY chapter-vty SYSTEM "./common/chapters/vty.xml" >
-<!ENTITY sections-vty SYSTEM "generated/docbook_vty.xml" >
-]>
-
-<book>
- <info>
- <revhistory>
- <revision>
- <revnumber>v1</revnumber>
- <date>12th December 2017</date>
- <authorinitials>pm</authorinitials>
- <revremark>Initial</revremark>
- </revision>
- </revhistory>
-
- <title>OsmoMGW VTY Reference</title>
-
- <copyright>
- <year>2017</year>
- </copyright>
-
- <legalnotice>
- <para>This work is copyright by <orgname>sysmocom - s.f.m.c. GmbH</orgname>. All rights reserved.
- </para>
- </legalnotice>
- </info>
-
- <!-- Main chapters-->
- &chapter-vty;
-</book>
-
diff --git a/OsmoMGW/vty/mgw_vty_additions.xml b/OsmoMGW/vty/mgw_vty_additions.xml
deleted file mode 100644
index a4c675e..0000000
--- a/OsmoMGW/vty/mgw_vty_additions.xml
+++ /dev/null
@@ -1,2 +0,0 @@
-<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
-</vtydoc>
diff --git a/OsmoMGW/vty/mgw_vty_reference.xml b/OsmoMGW/vty/mgw_vty_reference.xml
deleted file mode 100644
index 834db04..0000000
--- a/OsmoMGW/vty/mgw_vty_reference.xml
+++ /dev/null
@@ -1,1645 +0,0 @@
-<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
- <node id='_common_cmds_'>
- <name>Common Commands</name>
- <description>These commands are available on all VTY nodes. They are listed here only once, to unclutter the VTY reference.</description>
- <command id='help'>
- <params>
- <param name='help' doc='Description of the interactive help system' />
- </params>
- </command>
- <command id='list'>
- <params>
- <param name='list' doc='Print command list' />
- </params>
- </command>
- <command id='write terminal'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- <param name='terminal' doc='Write to terminal' />
- </params>
- </command>
- <command id='write file'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- <param name='file' doc='Write to configuration file' />
- </params>
- </command>
- <command id='write memory'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- <param name='memory' doc='Write configuration to the file (same as write file)' />
- </params>
- </command>
- <command id='write'>
- <params>
- <param name='write' doc='Write running configuration to memory, network, or terminal' />
- </params>
- </command>
- <command id='show running-config'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='running-config' doc='running configuration' />
- </params>
- </command>
- <command id='exit'>
- <params>
- <param name='exit' doc='Exit current mode and down to previous mode' />
- </params>
- </command>
- <command id='end'>
- <params>
- <param name='end' doc='End current mode and change to enable mode.' />
- </params>
- </command>
- </node>
- <node id='view'>
- <name>view</name>
- <command id='show version'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='version' doc='Displays program version' />
- </params>
- </command>
- <command id='show online-help'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='online-help' doc='Online help' />
- </params>
- </command>
- <command id='enable'>
- <params>
- <param name='enable' doc='Turn on privileged mode command' />
- </params>
- </command>
- <command id='terminal length <0-512>'>
- <params>
- <param name='terminal' doc='Set terminal line parameters' />
- <param name='length' doc='Set number of lines on a screen' />
- <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' />
- </params>
- </command>
- <command id='terminal no length'>
- <params>
- <param name='terminal' doc='Set terminal line parameters' />
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='length' doc='Set number of lines on a screen' />
- </params>
- </command>
- <command id='who'>
- <params>
- <param name='who' doc='Display who is on vty' />
- </params>
- </command>
- <command id='show history'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='history' doc='Display the session command history' />
- </params>
- </command>
- <command id='logging enable'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='enable' doc='Enables logging to this vty' />
- </params>
- </command>
- <command id='logging disable'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='disable' doc='Disables logging to this vty' />
- </params>
- </command>
- <command id='logging filter all (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='filter' doc='Filter log messages' />
- <param name='all' doc='Do you want to log all messages?' />
- <param name='0' doc='Only print messages matched by other filters' />
- <param name='1' doc='Bypass filter and print all messages' />
- </params>
- </command>
- <command id='logging color (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='color' doc='Configure color-printing for log messages' />
- <param name='0' doc='Don't use color for printing messages' />
- <param name='1' doc='Use color for printing messages' />
- </params>
- </command>
- <command id='logging timestamp (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='timestamp' doc='Configure log message timestamping' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with current timestamp' />
- </params>
- </command>
- <command id='logging print extended-timestamp (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='extended-timestamp' doc='Configure log message timestamping' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
- </params>
- </command>
- <command id='logging print category (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='category' doc='Configure log message' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with category/subsystem name' />
- </params>
- </command>
- <command id='logging print category-hex (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='category-hex' doc='Configure log message' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' />
- </params>
- </command>
- <command id='logging print level (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='level' doc='Configure log message' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with the log level name' />
- </params>
- </command>
- <command id='logging print file (0|1|basename) [last]'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='file' doc='Configure log message' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with the source file and line' />
- <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' />
- <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
- </params>
- </command>
- <command id='logging set-log-mask MASK'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='set-log-mask' doc='Set the logmask of this logging target' />
- <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
- </params>
- </command>
- <command id='logging level (rtp|iuup|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (debug|info|notice|error|fatal)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='level' doc='Set the log level for a specified category' />
- <param name='rtp' doc='RTP stream handling' />
- <param name='iuup' doc='IuUP within RTP stream handling' />
- <param name='lglobal' doc='Library-internal global log family' />
- <param name='llapd' doc='LAPD in libosmogsm' />
- <param name='linp' doc='A-bis Intput Subsystem' />
- <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
- <param name='lmi' doc='A-bis Input Driver for Signalling' />
- <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
- <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
- <param name='lctrl' doc='Control Interface' />
- <param name='lgtp' doc='GPRS GTP library' />
- <param name='lstats' doc='Statistics messages and logging' />
- <param name='lgsup' doc='Generic Subscriber Update Protocol' />
- <param name='loap' doc='Osmocom Authentication Protocol' />
- <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
- <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
- <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
- <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
- <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
- <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
- <param name='debug' doc='Log debug messages and higher levels' />
- <param name='info' doc='Log informational messages and higher levels' />
- <param name='notice' doc='Log noticeable messages and higher levels' />
- <param name='error' doc='Log error messages and higher levels' />
- <param name='fatal' doc='Log only fatal messages' />
- </params>
- </command>
- <command id='logging level set-all (debug|info|notice|error|fatal)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='level' doc='Set the log level for a specified category' />
- <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
- <param name='debug' doc='Log debug messages and higher levels' />
- <param name='info' doc='Log informational messages and higher levels' />
- <param name='notice' doc='Log noticeable messages and higher levels' />
- <param name='error' doc='Log error messages and higher levels' />
- <param name='fatal' doc='Log only fatal messages' />
- </params>
- </command>
- <command id='logging level force-all (debug|info|notice|error|fatal)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='level' doc='Set the log level for a specified category' />
- <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' />
- <param name='debug' doc='Log debug messages and higher levels' />
- <param name='info' doc='Log informational messages and higher levels' />
- <param name='notice' doc='Log noticeable messages and higher levels' />
- <param name='error' doc='Log error messages and higher levels' />
- <param name='fatal' doc='Log only fatal messages' />
- </params>
- </command>
- <command id='no logging level force-all'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='logging' doc='Configure logging' />
- <param name='level' doc='Set the log level for a specified category' />
- <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' />
- </params>
- </command>
- <command id='show logging vty'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='logging' doc='Show current logging configuration' />
- <param name='vty' doc='Show current logging configuration for this vty' />
- </params>
- </command>
- <command id='show alarms'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='alarms' doc='Show current logging configuration' />
- </params>
- </command>
- <command id='show talloc-context (application|all) (full|brief|DEPTH)'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='talloc-context' doc='Show talloc memory hierarchy' />
- <param name='application' doc='Application's context' />
- <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
- <param name='full' doc='Display a full talloc memory hierarchy' />
- <param name='brief' doc='Display a brief talloc memory hierarchy' />
- <param name='DEPTH' doc='Specify required maximal depth value' />
- </params>
- </command>
- <command id='show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='talloc-context' doc='Show talloc memory hierarchy' />
- <param name='application' doc='Application's context' />
- <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
- <param name='full' doc='Display a full talloc memory hierarchy' />
- <param name='brief' doc='Display a brief talloc memory hierarchy' />
- <param name='DEPTH' doc='Specify required maximal depth value' />
- <param name='tree' doc='Display only a specific memory chunk' />
- <param name='ADDRESS' doc='Chunk address (e.g. 0xdeadbeef)' />
- </params>
- </command>
- <command id='show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='talloc-context' doc='Show talloc memory hierarchy' />
- <param name='application' doc='Application's context' />
- <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
- <param name='full' doc='Display a full talloc memory hierarchy' />
- <param name='brief' doc='Display a brief talloc memory hierarchy' />
- <param name='DEPTH' doc='Specify required maximal depth value' />
- <param name='filter' doc='Filter chunks using regular expression' />
- <param name='REGEXP' doc='Regular expression' />
- </params>
- </command>
- <command id='show stats'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='stats' doc='Show statistical values' />
- </params>
- </command>
- <command id='show stats level (global|peer|subscriber)'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='stats' doc='Show statistical values' />
- <param name='level' doc='Set the maximum group level' />
- <param name='global' doc='Show global groups only' />
- <param name='peer' doc='Show global and network peer related groups' />
- <param name='subscriber' doc='Show global, peer, and subscriber groups' />
- </params>
- </command>
- <command id='show asciidoc counters'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='asciidoc' doc='Asciidoc generation' />
- <param name='counters' doc='Generate table of all registered counters' />
- </params>
- </command>
- <command id='show rate-counters'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='rate-counters' doc='Show all rate counters' />
- </params>
- </command>
- <command id='show mgcp [stats]'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='mgcp' doc='Display information about the MGCP Media Gateway' />
- <param name='[stats]' doc='Include Statistics' />
- </params>
- </command>
- <command id='show mgcp endpoint NAME'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='mgcp' doc='Display information about the MGCP Media Gateway' />
- <param name='endpoint' doc='Display information about an endpoint' />
- <param name='NAME' doc='The name of the endpoint' />
- </params>
- </command>
- <command id='show mgcp trunk <0-64> endpoint NAME'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='mgcp' doc='Display information about the MGCP Media Gateway' />
- <param name='trunk' doc='Display information about a trunk' />
- <param name='<0-64>' doc='Trunk number' />
- <param name='endpoint' doc='Display information about an endpoint' />
- <param name='NAME' doc='The name of the endpoint' />
- </params>
- </command>
- </node>
- <node id='enable'>
- <name>enable</name>
- <command id='disable'>
- <params>
- <param name='disable' doc='Turn off privileged mode command' />
- </params>
- </command>
- <command id='configure terminal'>
- <params>
- <param name='configure' doc='Configuration from vty interface' />
- <param name='terminal' doc='Configuration terminal' />
- </params>
- </command>
- <command id='copy running-config startup-config'>
- <params>
- <param name='copy' doc='Copy configuration' />
- <param name='running-config' doc='Copy running config to... ' />
- <param name='startup-config' doc='Copy running config to startup config (same as write file)' />
- </params>
- </command>
- <command id='show startup-config'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='startup-config' doc='Contentes of startup configuration' />
- </params>
- </command>
- <command id='show version'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='version' doc='Displays program version' />
- </params>
- </command>
- <command id='show online-help'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='online-help' doc='Online help' />
- </params>
- </command>
- <command id='terminal length <0-512>'>
- <params>
- <param name='terminal' doc='Set terminal line parameters' />
- <param name='length' doc='Set number of lines on a screen' />
- <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' />
- </params>
- </command>
- <command id='terminal no length'>
- <params>
- <param name='terminal' doc='Set terminal line parameters' />
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='length' doc='Set number of lines on a screen' />
- </params>
- </command>
- <command id='who'>
- <params>
- <param name='who' doc='Display who is on vty' />
- </params>
- </command>
- <command id='show history'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='history' doc='Display the session command history' />
- </params>
- </command>
- <command id='terminal monitor'>
- <params>
- <param name='terminal' doc='Set terminal line parameters' />
- <param name='monitor' doc='Copy debug output to the current terminal line' />
- </params>
- </command>
- <command id='terminal no monitor'>
- <params>
- <param name='terminal' doc='Set terminal line parameters' />
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='monitor' doc='Copy debug output to the current terminal line' />
- </params>
- </command>
- <command id='logging enable'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='enable' doc='Enables logging to this vty' />
- </params>
- </command>
- <command id='logging disable'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='disable' doc='Disables logging to this vty' />
- </params>
- </command>
- <command id='logging filter all (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='filter' doc='Filter log messages' />
- <param name='all' doc='Do you want to log all messages?' />
- <param name='0' doc='Only print messages matched by other filters' />
- <param name='1' doc='Bypass filter and print all messages' />
- </params>
- </command>
- <command id='logging color (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='color' doc='Configure color-printing for log messages' />
- <param name='0' doc='Don't use color for printing messages' />
- <param name='1' doc='Use color for printing messages' />
- </params>
- </command>
- <command id='logging timestamp (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='timestamp' doc='Configure log message timestamping' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with current timestamp' />
- </params>
- </command>
- <command id='logging print extended-timestamp (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='extended-timestamp' doc='Configure log message timestamping' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
- </params>
- </command>
- <command id='logging print category (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='category' doc='Configure log message' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with category/subsystem name' />
- </params>
- </command>
- <command id='logging print category-hex (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='category-hex' doc='Configure log message' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' />
- </params>
- </command>
- <command id='logging print level (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='level' doc='Configure log message' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with the log level name' />
- </params>
- </command>
- <command id='logging print file (0|1|basename) [last]'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='file' doc='Configure log message' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with the source file and line' />
- <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' />
- <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
- </params>
- </command>
- <command id='logging set-log-mask MASK'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='set-log-mask' doc='Set the logmask of this logging target' />
- <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
- </params>
- </command>
- <command id='logging level (rtp|iuup|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (debug|info|notice|error|fatal)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='level' doc='Set the log level for a specified category' />
- <param name='rtp' doc='RTP stream handling' />
- <param name='iuup' doc='IuUP within RTP stream handling' />
- <param name='lglobal' doc='Library-internal global log family' />
- <param name='llapd' doc='LAPD in libosmogsm' />
- <param name='linp' doc='A-bis Intput Subsystem' />
- <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
- <param name='lmi' doc='A-bis Input Driver for Signalling' />
- <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
- <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
- <param name='lctrl' doc='Control Interface' />
- <param name='lgtp' doc='GPRS GTP library' />
- <param name='lstats' doc='Statistics messages and logging' />
- <param name='lgsup' doc='Generic Subscriber Update Protocol' />
- <param name='loap' doc='Osmocom Authentication Protocol' />
- <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
- <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
- <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
- <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
- <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
- <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
- <param name='debug' doc='Log debug messages and higher levels' />
- <param name='info' doc='Log informational messages and higher levels' />
- <param name='notice' doc='Log noticeable messages and higher levels' />
- <param name='error' doc='Log error messages and higher levels' />
- <param name='fatal' doc='Log only fatal messages' />
- </params>
- </command>
- <command id='logging level set-all (debug|info|notice|error|fatal)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='level' doc='Set the log level for a specified category' />
- <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
- <param name='debug' doc='Log debug messages and higher levels' />
- <param name='info' doc='Log informational messages and higher levels' />
- <param name='notice' doc='Log noticeable messages and higher levels' />
- <param name='error' doc='Log error messages and higher levels' />
- <param name='fatal' doc='Log only fatal messages' />
- </params>
- </command>
- <command id='logging level force-all (debug|info|notice|error|fatal)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='level' doc='Set the log level for a specified category' />
- <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' />
- <param name='debug' doc='Log debug messages and higher levels' />
- <param name='info' doc='Log informational messages and higher levels' />
- <param name='notice' doc='Log noticeable messages and higher levels' />
- <param name='error' doc='Log error messages and higher levels' />
- <param name='fatal' doc='Log only fatal messages' />
- </params>
- </command>
- <command id='no logging level force-all'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='logging' doc='Configure logging' />
- <param name='level' doc='Set the log level for a specified category' />
- <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' />
- </params>
- </command>
- <command id='show logging vty'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='logging' doc='Show current logging configuration' />
- <param name='vty' doc='Show current logging configuration for this vty' />
- </params>
- </command>
- <command id='show alarms'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='alarms' doc='Show current logging configuration' />
- </params>
- </command>
- <command id='show talloc-context (application|all) (full|brief|DEPTH)'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='talloc-context' doc='Show talloc memory hierarchy' />
- <param name='application' doc='Application's context' />
- <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
- <param name='full' doc='Display a full talloc memory hierarchy' />
- <param name='brief' doc='Display a brief talloc memory hierarchy' />
- <param name='DEPTH' doc='Specify required maximal depth value' />
- </params>
- </command>
- <command id='show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='talloc-context' doc='Show talloc memory hierarchy' />
- <param name='application' doc='Application's context' />
- <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
- <param name='full' doc='Display a full talloc memory hierarchy' />
- <param name='brief' doc='Display a brief talloc memory hierarchy' />
- <param name='DEPTH' doc='Specify required maximal depth value' />
- <param name='tree' doc='Display only a specific memory chunk' />
- <param name='ADDRESS' doc='Chunk address (e.g. 0xdeadbeef)' />
- </params>
- </command>
- <command id='show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='talloc-context' doc='Show talloc memory hierarchy' />
- <param name='application' doc='Application's context' />
- <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
- <param name='full' doc='Display a full talloc memory hierarchy' />
- <param name='brief' doc='Display a brief talloc memory hierarchy' />
- <param name='DEPTH' doc='Specify required maximal depth value' />
- <param name='filter' doc='Filter chunks using regular expression' />
- <param name='REGEXP' doc='Regular expression' />
- </params>
- </command>
- <command id='show stats'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='stats' doc='Show statistical values' />
- </params>
- </command>
- <command id='show stats level (global|peer|subscriber)'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='stats' doc='Show statistical values' />
- <param name='level' doc='Set the maximum group level' />
- <param name='global' doc='Show global groups only' />
- <param name='peer' doc='Show global and network peer related groups' />
- <param name='subscriber' doc='Show global, peer, and subscriber groups' />
- </params>
- </command>
- <command id='show asciidoc counters'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='asciidoc' doc='Asciidoc generation' />
- <param name='counters' doc='Generate table of all registered counters' />
- </params>
- </command>
- <command id='show rate-counters'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='rate-counters' doc='Show all rate counters' />
- </params>
- </command>
- <command id='show mgcp [stats]'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='mgcp' doc='Display information about the MGCP Media Gateway' />
- <param name='[stats]' doc='Include Statistics' />
- </params>
- </command>
- <command id='show mgcp endpoint NAME'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='mgcp' doc='Display information about the MGCP Media Gateway' />
- <param name='endpoint' doc='Display information about an endpoint' />
- <param name='NAME' doc='The name of the endpoint' />
- </params>
- </command>
- <command id='show mgcp trunk <0-64> endpoint NAME'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='mgcp' doc='Display information about the MGCP Media Gateway' />
- <param name='trunk' doc='Display information about a trunk' />
- <param name='<0-64>' doc='Trunk number' />
- <param name='endpoint' doc='Display information about an endpoint' />
- <param name='NAME' doc='The name of the endpoint' />
- </params>
- </command>
- <command id='loop-endpoint <0-64> NAME (0|1)'>
- <params>
- <param name='loop-endpoint' doc='Loop a given endpoint' />
- <param name='<0-64>' doc='Trunk number' />
- <param name='NAME' doc='The name in hex of the endpoint' />
- <param name='0' doc='Disable the loop' />
- <param name='1' doc='Enable the loop' />
- </params>
- </command>
- <command id='tap-rtp <0-64> ENDPOINT CONN (in|out) A.B.C.D <0-65534>'>
- <params>
- <param name='tap-rtp' doc='Forward data on endpoint to a different system' />
- <param name='<0-64>' doc='Trunk number' />
- <param name='ENDPOINT' doc='The endpoint in hex' />
- <param name='CONN' doc='The connection id in hex' />
- <param name='in' doc='Forward incoming data' />
- <param name='out' doc='Forward leaving data' />
- <param name='A.B.C.D' doc='destination IP of the data' />
- <param name='<0-65534>' doc='destination port' />
- </params>
- </command>
- <command id='free-endpoint <0-64> NUMBER'>
- <params>
- <param name='free-endpoint' doc='Free the given endpoint' />
- <param name='<0-64>' doc='Trunk number' />
- <param name='NUMBER' doc='Endpoint number in hex.' />
- </params>
- </command>
- <command id='reset-endpoint <0-64> NUMBER'>
- <params>
- <param name='reset-endpoint' doc='Reset the given endpoint' />
- <param name='<0-64>' doc='Trunk number' />
- <param name='NUMBER' doc='Endpoint number in hex.' />
- </params>
- </command>
- <command id='reset-all-endpoints'>
- <params>
- <param name='reset-all-endpoints' doc='Reset all endpoints' />
- </params>
- </command>
- </node>
- <node id='config'>
- <name>config</name>
- <command id='hostname WORD'>
- <params>
- <param name='hostname' doc='Set system's network name' />
- <param name='WORD' doc='This system's network name' />
- </params>
- </command>
- <command id='no hostname [HOSTNAME]'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='hostname' doc='Reset system's network name' />
- <param name='[HOSTNAME]' doc='Host name of this router' />
- </params>
- </command>
- <command id='password (8|) WORD'>
- <params>
- <param name='password' doc='Assign the terminal connection password' />
- <param name='8' doc='Specifies a HIDDEN password will follow' />
- <param name='' doc='dummy string ' />
- <param name='WORD' doc='The HIDDEN line password string' />
- </params>
- </command>
- <command id='password LINE'>
- <params>
- <param name='password' doc='Assign the terminal connection password' />
- <param name='LINE' doc='The UNENCRYPTED (cleartext) line password' />
- </params>
- </command>
- <command id='enable password (8|) WORD'>
- <params>
- <param name='enable' doc='Modify enable password parameters' />
- <param name='password' doc='Assign the privileged level password' />
- <param name='8' doc='Specifies a HIDDEN password will follow' />
- <param name='' doc='dummy string ' />
- <param name='WORD' doc='The HIDDEN 'enable' password string' />
- </params>
- </command>
- <command id='enable password LINE'>
- <params>
- <param name='enable' doc='Modify enable password parameters' />
- <param name='password' doc='Assign the privileged level password' />
- <param name='LINE' doc='The UNENCRYPTED (cleartext) 'enable' password' />
- </params>
- </command>
- <command id='no enable password'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='enable' doc='Modify enable password parameters' />
- <param name='password' doc='Assign the privileged level password' />
- </params>
- </command>
- <command id='banner motd default'>
- <params>
- <param name='banner' doc='Set banner string' />
- <param name='motd' doc='Strings for motd' />
- <param name='default' doc='Default string' />
- </params>
- </command>
- <command id='banner motd file [FILE]'>
- <params>
- <param name='banner' doc='Set banner' />
- <param name='motd' doc='Banner for motd' />
- <param name='file' doc='Banner from a file' />
- <param name='[FILE]' doc='Filename' />
- </params>
- </command>
- <command id='no banner motd'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='banner' doc='Set banner string' />
- <param name='motd' doc='Strings for motd' />
- </params>
- </command>
- <command id='service terminal-length <0-512>'>
- <params>
- <param name='service' doc='Set up miscellaneous service' />
- <param name='terminal-length' doc='System wide terminal length configuration' />
- <param name='<0-512>' doc='Number of lines of VTY (0 means no line control)' />
- </params>
- </command>
- <command id='no service terminal-length [<0-512>]'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='service' doc='Set up miscellaneous service' />
- <param name='terminal-length' doc='System wide terminal length configuration' />
- <param name='[<0-512>]' doc='Number of lines of VTY (0 means no line control)' />
- </params>
- </command>
- <command id='line vty'>
- <params>
- <param name='line' doc='Configure a terminal line' />
- <param name='vty' doc='Virtual terminal' />
- </params>
- </command>
- <command id='service advanced-vty'>
- <params>
- <param name='service' doc='Set up miscellaneous service' />
- <param name='advanced-vty' doc='Enable advanced mode vty interface' />
- </params>
- </command>
- <command id='no service advanced-vty'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='service' doc='Set up miscellaneous service' />
- <param name='advanced-vty' doc='Enable advanced mode vty interface' />
- </params>
- </command>
- <command id='show history'>
- <params>
- <param name='show' doc='Show running system information' />
- <param name='history' doc='Display the session command history' />
- </params>
- </command>
- <command id='log stderr'>
- <params>
- <param name='log' doc='Configure logging sub-system' />
- <param name='stderr' doc='Logging via STDERR of the process' />
- </params>
- </command>
- <command id='no log stderr'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='log' doc='Configure logging sub-system' />
- <param name='stderr' doc='Logging via STDERR of the process' />
- </params>
- </command>
- <command id='log file .FILENAME'>
- <params>
- <param name='log' doc='Configure logging sub-system' />
- <param name='file' doc='Logging to text file' />
- <param name='.FILENAME' doc='Filename' />
- </params>
- </command>
- <command id='no log file .FILENAME'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='log' doc='Configure logging sub-system' />
- <param name='file' doc='Logging to text file' />
- <param name='.FILENAME' doc='Filename' />
- </params>
- </command>
- <command id='log alarms <2-32700>'>
- <params>
- <param name='log' doc='Configure logging sub-system' />
- <param name='alarms' doc='Logging alarms to osmo_strrb' />
- <param name='<2-32700>' doc='Maximum number of messages to log' />
- </params>
- </command>
- <command id='no log alarms'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='log' doc='Configure logging sub-system' />
- <param name='alarms' doc='Logging alarms to osmo_strrb' />
- </params>
- </command>
- <command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'>
- <params>
- <param name='log' doc='Configure logging sub-system' />
- <param name='syslog' doc='Logging via syslog' />
- <param name='authpriv' doc='Security/authorization messages facility' />
- <param name='cron' doc='Clock daemon (cron/at) facility' />
- <param name='daemon' doc='General system daemon facility' />
- <param name='ftp' doc='Ftp daemon facility' />
- <param name='lpr' doc='Line printer facility' />
- <param name='mail' doc='Mail facility' />
- <param name='news' doc='News facility' />
- <param name='user' doc='Generic facility' />
- <param name='uucp' doc='UUCP facility' />
- </params>
- </command>
- <command id='log syslog local <0-7>'>
- <params>
- <param name='log' doc='Configure logging sub-system' />
- <param name='syslog' doc='Logging via syslog' />
- <param name='local' doc='Syslog LOCAL facility' />
- <param name='<0-7>' doc='Local facility number' />
- </params>
- </command>
- <command id='no log syslog'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='log' doc='Configure logging sub-system' />
- <param name='syslog' doc='Logging via syslog' />
- </params>
- </command>
- <command id='log gsmtap [HOSTNAME]'>
- <params>
- <param name='log' doc='Configure logging sub-system' />
- <param name='gsmtap' doc='Logging via GSMTAP' />
- <param name='[HOSTNAME]' doc='Host name to send the GSMTAP logging to (UDP port 4729)' />
- </params>
- </command>
- <command id='stats reporter statsd'>
- <params>
- <param name='stats' doc='Configure stats sub-system' />
- <param name='reporter' doc='Configure a stats reporter' />
- <param name='statsd' doc='Report to a STATSD server' />
- </params>
- </command>
- <command id='no stats reporter statsd'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='stats' doc='Configure stats sub-system' />
- <param name='reporter' doc='Configure a stats reporter' />
- <param name='statsd' doc='Report to a STATSD server' />
- </params>
- </command>
- <command id='stats reporter log'>
- <params>
- <param name='stats' doc='Configure stats sub-system' />
- <param name='reporter' doc='Configure a stats reporter' />
- <param name='log' doc='Report to the logger' />
- </params>
- </command>
- <command id='no stats reporter log'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='stats' doc='Configure stats sub-system' />
- <param name='reporter' doc='Configure a stats reporter' />
- <param name='log' doc='Report to the logger' />
- </params>
- </command>
- <command id='stats interval <1-65535>'>
- <params>
- <param name='stats' doc='Configure stats sub-system' />
- <param name='interval' doc='Set the reporting interval' />
- <param name='<1-65535>' doc='Interval in seconds' />
- </params>
- </command>
- <command id='mgcp'>
- <params>
- <param name='mgcp' doc='Configure the MGCP' />
- </params>
- </command>
- </node>
- <node id='config-log'>
- <name>config-log</name>
- <command id='logging filter all (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='filter' doc='Filter log messages' />
- <param name='all' doc='Do you want to log all messages?' />
- <param name='0' doc='Only print messages matched by other filters' />
- <param name='1' doc='Bypass filter and print all messages' />
- </params>
- </command>
- <command id='logging color (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='color' doc='Configure color-printing for log messages' />
- <param name='0' doc='Don't use color for printing messages' />
- <param name='1' doc='Use color for printing messages' />
- </params>
- </command>
- <command id='logging timestamp (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='timestamp' doc='Configure log message timestamping' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with current timestamp' />
- </params>
- </command>
- <command id='logging print extended-timestamp (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='extended-timestamp' doc='Configure log message timestamping' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
- </params>
- </command>
- <command id='logging print category (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='category' doc='Configure log message' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with category/subsystem name' />
- </params>
- </command>
- <command id='logging print category-hex (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='category-hex' doc='Configure log message' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' />
- </params>
- </command>
- <command id='logging print level (0|1)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='level' doc='Configure log message' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with the log level name' />
- </params>
- </command>
- <command id='logging print file (0|1|basename) [last]'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='print' doc='Log output settings' />
- <param name='file' doc='Configure log message' />
- <param name='0' doc='Don't prefix each log message' />
- <param name='1' doc='Prefix each log message with the source file and line' />
- <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' />
- <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
- </params>
- </command>
- <command id='logging level (rtp|iuup|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (debug|info|notice|error|fatal)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='level' doc='Set the log level for a specified category' />
- <param name='rtp' doc='RTP stream handling' />
- <param name='iuup' doc='IuUP within RTP stream handling' />
- <param name='lglobal' doc='Library-internal global log family' />
- <param name='llapd' doc='LAPD in libosmogsm' />
- <param name='linp' doc='A-bis Intput Subsystem' />
- <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
- <param name='lmi' doc='A-bis Input Driver for Signalling' />
- <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
- <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
- <param name='lctrl' doc='Control Interface' />
- <param name='lgtp' doc='GPRS GTP library' />
- <param name='lstats' doc='Statistics messages and logging' />
- <param name='lgsup' doc='Generic Subscriber Update Protocol' />
- <param name='loap' doc='Osmocom Authentication Protocol' />
- <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
- <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
- <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
- <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
- <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
- <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
- <param name='debug' doc='Log debug messages and higher levels' />
- <param name='info' doc='Log informational messages and higher levels' />
- <param name='notice' doc='Log noticeable messages and higher levels' />
- <param name='error' doc='Log error messages and higher levels' />
- <param name='fatal' doc='Log only fatal messages' />
- </params>
- </command>
- <command id='logging level set-all (debug|info|notice|error|fatal)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='level' doc='Set the log level for a specified category' />
- <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
- <param name='debug' doc='Log debug messages and higher levels' />
- <param name='info' doc='Log informational messages and higher levels' />
- <param name='notice' doc='Log noticeable messages and higher levels' />
- <param name='error' doc='Log error messages and higher levels' />
- <param name='fatal' doc='Log only fatal messages' />
- </params>
- </command>
- <command id='logging level force-all (debug|info|notice|error|fatal)'>
- <params>
- <param name='logging' doc='Configure logging' />
- <param name='level' doc='Set the log level for a specified category' />
- <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' />
- <param name='debug' doc='Log debug messages and higher levels' />
- <param name='info' doc='Log informational messages and higher levels' />
- <param name='notice' doc='Log noticeable messages and higher levels' />
- <param name='error' doc='Log error messages and higher levels' />
- <param name='fatal' doc='Log only fatal messages' />
- </params>
- </command>
- <command id='no logging level force-all'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='logging' doc='Configure logging' />
- <param name='level' doc='Set the log level for a specified category' />
- <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' />
- </params>
- </command>
- </node>
- <node id='config-stats'>
- <name>config-stats</name>
- <command id='local-ip ADDR'>
- <params>
- <param name='local-ip' doc='Set the IP address to which we bind locally' />
- <param name='ADDR' doc='IP Address' />
- </params>
- </command>
- <command id='no local-ip'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='local-ip' doc='Set the IP address to which we bind locally' />
- </params>
- </command>
- <command id='remote-ip ADDR'>
- <params>
- <param name='remote-ip' doc='Set the remote IP address to which we connect' />
- <param name='ADDR' doc='IP Address' />
- </params>
- </command>
- <command id='remote-port <1-65535>'>
- <params>
- <param name='remote-port' doc='Set the remote port to which we connect' />
- <param name='<1-65535>' doc='Remote port number' />
- </params>
- </command>
- <command id='mtu <100-65535>'>
- <params>
- <param name='mtu' doc='Set the maximum packet size' />
- <param name='<100-65535>' doc='Size in byte' />
- </params>
- </command>
- <command id='no mtu'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='mtu' doc='Set the maximum packet size' />
- </params>
- </command>
- <command id='prefix PREFIX'>
- <params>
- <param name='prefix' doc='Set the item name prefix' />
- <param name='PREFIX' doc='The prefix string' />
- </params>
- </command>
- <command id='no prefix'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='prefix' doc='Set the item name prefix' />
- </params>
- </command>
- <command id='level (global|peer|subscriber)'>
- <params>
- <param name='level' doc='Set the maximum group level' />
- <param name='global' doc='Report global groups only' />
- <param name='peer' doc='Report global and network peer related groups' />
- <param name='subscriber' doc='Report global, peer, and subscriber groups' />
- </params>
- </command>
- <command id='enable'>
- <params>
- <param name='enable' doc='Enable the reporter' />
- </params>
- </command>
- <command id='disable'>
- <params>
- <param name='disable' doc='Disable the reporter' />
- </params>
- </command>
- </node>
- <node id='config-line'>
- <name>config-line</name>
- <command id='login'>
- <params>
- <param name='login' doc='Enable password checking' />
- </params>
- </command>
- <command id='no login'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='login' doc='Enable password checking' />
- </params>
- </command>
- <command id='bind A.B.C.D'>
- <params>
- <param name='bind' doc='Accept VTY telnet connections on local interface' />
- <param name='A.B.C.D' doc='Local interface IP address (default: 127.0.0.1)' />
- </params>
- </command>
- </node>
- <node id='config-mgcp'>
- <name>config-mgcp</name>
- <command id='local ip A.B.C.D'>
- <params>
- <param name='local' doc='Local options for the SDP record' />
- <param name='ip' doc='IP information' />
- <param name='A.B.C.D' doc='IPv4 Address to use in SDP record' />
- </params>
- </command>
- <command id='bind ip A.B.C.D'>
- <params>
- <param name='bind' doc='Listen/Bind related socket option' />
- <param name='ip' doc='IP information' />
- <param name='A.B.C.D' doc='IPv4 Address to bind to' />
- </params>
- </command>
- <command id='bind port <0-65534>'>
- <params>
- <param name='bind' doc='Listen/Bind related socket option' />
- <param name='port' doc='Port information' />
- <param name='<0-65534>' doc='UDP port to listen for MGCP messages' />
- </params>
- </command>
- <command id='bind early (0|1)'>
- <params>
- <param name='bind' doc='Listen/Bind related socket option' />
- <param name='early' doc='Bind local ports on start up' />
- <param name='0' doc='Bind on demand' />
- <param name='1' doc='Bind on startup' />
- </params>
- </command>
- <command id='rtp port-range <1024-65534> <1025-65535>'>
- <params>
- <param name='rtp' doc='RTP configuration' />
- <param name='port-range' doc='Range of ports to use for the NET side' />
- <param name='<1024-65534>' doc='Start of the range of ports' />
- <param name='<1025-65535>' doc='End of the range of ports' />
- </params>
- </command>
- <command id='rtp bind-ip A.B.C.D'>
- <params>
- <param name='rtp' doc='RTP configuration' />
- <param name='bind-ip' doc='Bind endpoints facing the Network' />
- <param name='A.B.C.D' doc='Address to bind to' />
- </params>
- </command>
- <command id='no rtp bind-ip'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='rtp' doc='RTP configuration' />
- <param name='bind-ip' doc='Bind endpoints facing the Network' />
- </params>
- </command>
- <command id='rtp ip-probing'>
- <params>
- <param name='rtp' doc='RTP configuration' />
- <param name='ip-probing' doc='automatic rtp bind ip selection' />
- </params>
- </command>
- <command id='no rtp ip-probing'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='rtp' doc='RTP configuration' />
- <param name='ip-probing' doc='no automatic rtp bind ip selection' />
- </params>
- </command>
- <command id='rtp ip-dscp <0-255>'>
- <params>
- <param name='rtp' doc='RTP configuration' />
- <param name='ip-dscp' doc='Apply IP_TOS to the audio stream (including Osmux)' />
- <param name='<0-255>' doc='The DSCP value' />
- </params>
- </command>
- <command id='rtp force-ptime (10|20|40)'>
- <params>
- <param name='rtp' doc='RTP configuration' />
- <param name='force-ptime' doc='Force a fixed ptime for packets sentThe required ptime (packet duration) in ms' />
- <param name='10' doc='10 ms' />
- <param name='20' doc='20 ms' />
- <param name='40' doc='40 ms' />
- </params>
- </command>
- <command id='no rtp force-ptime'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='rtp' doc='RTP configuration' />
- <param name='force-ptime' doc='Force a fixed ptime for packets sent' />
- </params>
- </command>
- <command id='rtp keep-alive <1-120>'>
- <params>
- <param name='rtp' doc='RTP configuration' />
- <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' />
- <param name='<1-120>' doc='Keep alive interval in secs' />
- </params>
- </command>
- <command id='rtp keep-alive once'>
- <params>
- <param name='rtp' doc='RTP configuration' />
- <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' />
- <param name='once' doc='Send dummy packet only once after CRCX/MDCX' />
- </params>
- </command>
- <command id='no rtp keep-alive'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='rtp' doc='RTP configuration' />
- <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' />
- </params>
- </command>
- <command id='call-agent ip A.B.C.D'>
- <params>
- <param name='call-agent' doc='Callagent information' />
- <param name='ip' doc='IP information' />
- <param name='A.B.C.D' doc='IPv4 Address of the callagent' />
- </params>
- </command>
- <command id='sdp audio-payload number <0-255>'>
- <params>
- <param name='sdp' doc='SDP File related options' />
- <param name='audio-payload' doc='Audio payload options' />
- <param name='number' doc='Number' />
- <param name='<0-255>' doc='Payload number' />
- </params>
- </command>
- <command id='sdp audio-payload name NAME'>
- <params>
- <param name='sdp' doc='SDP File related options' />
- <param name='audio-payload' doc='Audio payload options' />
- <param name='name' doc='Name' />
- <param name='NAME' doc='Payload name' />
- </params>
- </command>
- <command id='loop (0|1)'>
- <params>
- <param name='loop' doc='Loop audio for all endpoints on main trunk' />
- <param name='0' doc='Don't Loop' />
- <param name='1' doc='Loop' />
- </params>
- </command>
- <command id='force-realloc (0|1)'>
- <params>
- <param name='force-realloc' doc='Force endpoint reallocation when the endpoint is still seized' />
- <param name='0' doc='Don't force reallocation' />
- <param name='1' doc='force reallocation' />
- </params>
- </command>
- <command id='rtp-accept-all (0|1)'>
- <params>
- <param name='rtp-accept-all' doc='Accept all RTP packets, even when the originating IP/Port does not match' />
- <param name='0' doc='enable filter' />
- <param name='1' doc='disable filter' />
- </params>
- </command>
- <command id='number endpoints <0-65534>'>
- <params>
- <param name='number' doc='Number options' />
- <param name='endpoints' doc='Endpoints available' />
- <param name='<0-65534>' doc='Number endpoints' />
- </params>
- </command>
- <command id='rtcp-omit'>
- <params>
- <param name='rtcp-omit' doc='Drop RTCP packets in both directions' />
- </params>
- </command>
- <command id='no rtcp-omit'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='rtcp-omit' doc='Drop RTCP packets in both directions' />
- </params>
- </command>
- <command id='rtp-patch ssrc'>
- <params>
- <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
- <param name='ssrc' doc='Force a fixed SSRC' />
- </params>
- </command>
- <command id='no rtp-patch ssrc'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
- <param name='ssrc' doc='Force a fixed SSRC' />
- </params>
- </command>
- <command id='rtp-patch timestamp'>
- <params>
- <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
- <param name='timestamp' doc='Adjust RTP timestamp' />
- </params>
- </command>
- <command id='no rtp-patch timestamp'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
- <param name='timestamp' doc='Adjust RTP timestamp' />
- </params>
- </command>
- <command id='no rtp-patch'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
- </params>
- </command>
- <command id='sdp audio fmtp-extra .NAME'>
- <params>
- <param name='sdp' doc='Add extra fmtp for the SDP file' />
- <param name='audio' doc='Audio' />
- <param name='fmtp-extra' doc='Fmtp-extra' />
- <param name='.NAME' doc='Extra Information' />
- </params>
- </command>
- <command id='sdp audio-payload send-ptime'>
- <params>
- <param name='sdp' doc='SDP File related options' />
- <param name='audio-payload' doc='Audio payload options' />
- <param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' />
- </params>
- </command>
- <command id='no sdp audio-payload send-ptime'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='sdp' doc='SDP File related options' />
- <param name='audio-payload' doc='Audio payload options' />
- <param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' />
- </params>
- </command>
- <command id='sdp audio-payload send-name'>
- <params>
- <param name='sdp' doc='SDP File related options' />
- <param name='audio-payload' doc='Audio payload options' />
- <param name='send-name' doc='Send SDP rtpmap with the audio name' />
- </params>
- </command>
- <command id='no sdp audio-payload send-name'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='sdp' doc='SDP File related options' />
- <param name='audio-payload' doc='Audio payload options' />
- <param name='send-name' doc='Send SDP rtpmap with the audio name' />
- </params>
- </command>
- <command id='osmux (on|off|only)'>
- <params>
- <param name='osmux' doc='RTP multiplexing' />
- <param name='on' doc='Enable OSMUX' />
- <param name='off' doc='Disable OSMUX' />
- <param name='only' doc='Only use OSMUX' />
- </params>
- </command>
- <command id='osmux bind-ip A.B.C.D'>
- <params>
- <param name='osmux' doc='RTP multiplexing' />
- <param name='bind-ip' doc='IP information' />
- <param name='A.B.C.D' doc='IPv4 Address to bind to' />
- </params>
- </command>
- <command id='osmux batch-factor <1-8>'>
- <params>
- <param name='osmux' doc='RTP multiplexing' />
- <param name='batch-factor' doc='Batching factor' />
- <param name='<1-8>' doc='Number of messages in the batch' />
- </params>
- </command>
- <command id='osmux batch-size <1-65535>'>
- <params>
- <param name='osmux' doc='RTP multiplexing' />
- <param name='batch-size' doc='batch size' />
- <param name='<1-65535>' doc='Batch size in bytes' />
- </params>
- </command>
- <command id='osmux port <1-65535>'>
- <params>
- <param name='osmux' doc='RTP multiplexing' />
- <param name='port' doc='port' />
- <param name='<1-65535>' doc='UDP port' />
- </params>
- </command>
- <command id='osmux dummy (on|off)'>
- <params>
- <param name='osmux' doc='RTP multiplexing' />
- <param name='dummy' doc='Dummy padding' />
- <param name='on' doc='Enable dummy padding' />
- <param name='off' doc='Disable dummy padding' />
- </params>
- </command>
- <command id='allow-transcoding'>
- <params>
- <param name='allow-transcoding' doc='Allow transcoding' />
- </params>
- </command>
- <command id='no allow-transcoding'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='allow-transcoding' doc='Allow transcoding' />
- </params>
- </command>
- <command id='domain NAME'>
- <params>
- <param name='domain' doc='Set the domain part expected in MGCP messages' endpoint names' />
- <param name='NAME' doc='Qualified domain name expected in MGCP endpoint names, or '*' to accept any domain' />
- </params>
- </command>
- <command id='trunk <1-64>'>
- <params>
- <param name='trunk' doc='Configure a SS7 trunk' />
- <param name='<1-64>' doc='Trunk Nr' />
- </params>
- </command>
- </node>
- <node id='config-mgcp-trunk'>
- <name>config-mgcp-trunk</name>
- <command id='rtp keep-alive <1-120>'>
- <params>
- <param name='rtp' doc='RTP configuration' />
- <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' />
- <param name='<1-120>' doc='Keep-alive interval in secs' />
- </params>
- </command>
- <command id='rtp keep-alive once'>
- <params>
- <param name='rtp' doc='RTP configuration' />
- <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' />
- <param name='once' doc='Send dummy packet only once after CRCX/MDCX' />
- </params>
- </command>
- <command id='no rtp keep-alive'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='rtp' doc='RTP configuration' />
- <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' />
- </params>
- </command>
- <command id='sdp audio-payload number <0-255>'>
- <params>
- <param name='sdp' doc='SDP File related options' />
- <param name='audio-payload' doc='Audio payload options' />
- <param name='number' doc='Number' />
- <param name='<0-255>' doc='Payload Number' />
- </params>
- </command>
- <command id='sdp audio-payload name NAME'>
- <params>
- <param name='sdp' doc='SDP File related options' />
- <param name='audio-payload' doc='Audio payload options' />
- <param name='name' doc='Payload' />
- <param name='NAME' doc='Payload Name' />
- </params>
- </command>
- <command id='loop (0|1)'>
- <params>
- <param name='loop' doc='Loop audio for all endpoints on this trunk' />
- <param name='0' doc='Don't Loop' />
- <param name='1' doc='Loop' />
- </params>
- </command>
- <command id='rtcp-omit'>
- <params>
- <param name='rtcp-omit' doc='Drop RTCP packets in both directions' />
- </params>
- </command>
- <command id='no rtcp-omit'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='rtcp-omit' doc='Drop RTCP packets in both directions' />
- </params>
- </command>
- <command id='rtp-patch ssrc'>
- <params>
- <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
- <param name='ssrc' doc='Force a fixed SSRC' />
- </params>
- </command>
- <command id='no rtp-patch ssrc'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
- <param name='ssrc' doc='Force a fixed SSRC' />
- </params>
- </command>
- <command id='rtp-patch timestamp'>
- <params>
- <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
- <param name='timestamp' doc='Adjust RTP timestamp' />
- </params>
- </command>
- <command id='no rtp-patch timestamp'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
- <param name='timestamp' doc='Adjust RTP timestamp' />
- </params>
- </command>
- <command id='no rtp-patch'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
- </params>
- </command>
- <command id='sdp audio fmtp-extra .NAME'>
- <params>
- <param name='sdp' doc='Add extra fmtp for the SDP file' />
- <param name='audio' doc='Audio' />
- <param name='fmtp-extra' doc='Fmtp-extra' />
- <param name='.NAME' doc='Extra Information' />
- </params>
- </command>
- <command id='sdp audio-payload send-ptime'>
- <params>
- <param name='sdp' doc='SDP File related options' />
- <param name='audio-payload' doc='Audio payload options' />
- <param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' />
- </params>
- </command>
- <command id='no sdp audio-payload send-ptime'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='sdp' doc='SDP File related options' />
- <param name='audio-payload' doc='Audio payload options' />
- <param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' />
- </params>
- </command>
- <command id='sdp audio-payload send-name'>
- <params>
- <param name='sdp' doc='SDP File related options' />
- <param name='audio-payload' doc='Audio payload options' />
- <param name='send-name' doc='Send SDP rtpmap with the audio name' />
- </params>
- </command>
- <command id='no sdp audio-payload send-name'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='sdp' doc='SDP File related options' />
- <param name='audio-payload' doc='Audio payload options' />
- <param name='send-name' doc='Send SDP rtpmap with the audio name' />
- </params>
- </command>
- <command id='allow-transcoding'>
- <params>
- <param name='allow-transcoding' doc='Allow transcoding' />
- </params>
- </command>
- <command id='no allow-transcoding'>
- <params>
- <param name='no' doc='Negate a command or set its defaults' />
- <param name='allow-transcoding' doc='Allow transcoding' />
- </params>
- </command>
- </node>
-</vtydoc>
diff --git a/configure.ac b/configure.ac
index 74f3002..69dc3c1 100644
--- a/configure.ac
+++ b/configure.ac
@@ -30,7 +30,6 @@
tests/Makefile
OsmoGSMTester/Makefile
OsmoMGCP/Makefile
- OsmoMGW/Makefile
OsmoNAT/Makefile
OsmoNITB/Makefile
OsmoPCU/Makefile
--
To view, visit https://gerrit.osmocom.org/11965
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-gsm-manuals
Gerrit-Branch: master
Gerrit-MessageType: merged
Gerrit-Change-Id: I793a7150b676837cfa8591f7504872b04d4b1f7f
Gerrit-Change-Number: 11965
Gerrit-PatchSet: 2
Gerrit-Owner: osmith <osmith at sysmocom.de>
Gerrit-Reviewer: Jenkins Builder (1000002)
Gerrit-Reviewer: Pau Espin Pedrol <pespin at sysmocom.de>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20181128/7484ce31/attachment.htm>