Change in osmo-gsm-manuals[master]: remove OsmoSIPConnector files (now avail in osmo-sip-connector.git)

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.

osmith gerrit-no-reply at lists.osmocom.org
Wed Nov 28 10:00:16 UTC 2018


osmith has uploaded this change for review. ( https://gerrit.osmocom.org/11968


Change subject: remove OsmoSIPConnector files (now avail in osmo-sip-connector.git)
......................................................................

remove OsmoSIPConnector files (now avail in osmo-sip-connector.git)

Files were added in osmo-sip-connector.git Change-Id
I1317131ed6765fec996344fc6ed08350187b615b

Depends: osmo-sip-connector.git Change-Id I1317131ed6765fec996344fc6ed08350187b615b
Related: OS#3385
Change-Id: Id77812586eb21932b563b57e75cd85b721b7d6ab
---
M Makefile.am
D OsmoSIPConnector/Makefile.am
D OsmoSIPConnector/chapters/configuration.adoc
D OsmoSIPConnector/chapters/overview.adoc
D OsmoSIPConnector/chapters/running.adoc
D OsmoSIPConnector/osmosipconnector-usermanual-docinfo.xml
D OsmoSIPConnector/osmosipconnector-usermanual.adoc
D OsmoSIPConnector/osmosipconnector-vty-reference.xml
D OsmoSIPConnector/vty/sipconn_vty_additions.xml
D OsmoSIPConnector/vty/sipconn_vty_reference.xml
M configure.ac
11 files changed, 0 insertions(+), 1,448 deletions(-)



  git pull ssh://gerrit.osmocom.org:29418/osmo-gsm-manuals refs/changes/68/11968/1

diff --git a/Makefile.am b/Makefile.am
index da712fe..6c2879f 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -10,7 +10,6 @@
 	OsmoMGCP \
 	OsmoNAT \
 	OsmoNITB \
-	OsmoSIPConnector \
 	OsmoSTP \
 	OsmoTRX \
 	OsmocomBB
diff --git a/OsmoSIPConnector/Makefile.am b/OsmoSIPConnector/Makefile.am
deleted file mode 100644
index f2bb064..0000000
--- a/OsmoSIPConnector/Makefile.am
+++ /dev/null
@@ -1,15 +0,0 @@
-OSMO_GSM_MANUALS_DIR = $(top_srcdir)
-EXTRA_DIST = osmosipconnector-usermanual.adoc \
-	osmosipconnector-usermanual-docinfo.xml \
-	osmosipconnector-vty-reference.xml \
-	chapters \
-	vty
-
-ASCIIDOC = osmosipconnector-usermanual.adoc
-ASCIIDOC_DEPS = $(srcdir)/chapters/*.adoc
-include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.asciidoc.inc
-
-VTY_REFERENCE = osmosipconnector-vty-reference.xml
-include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.vty-reference.inc
-
-include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.common.inc
diff --git a/OsmoSIPConnector/chapters/configuration.adoc b/OsmoSIPConnector/chapters/configuration.adoc
deleted file mode 100644
index 5cd57fa..0000000
--- a/OsmoSIPConnector/chapters/configuration.adoc
+++ /dev/null
@@ -1,53 +0,0 @@
-== Configuring OsmoSIPConnector
-
-The configuration of OsmoSIPConnector consists mainly of two parts:
-configuring the MNCC interface towards the MSC and configuring the SIP
-interface towards the PBX.
-
-=== Configuring MNCC
-
-Configuring the MNCC interface is very simple. It has to be pointed to
-the same path that OsmoMSC is also using. This means that OsmoMSC and
-OsmoSIPConnector need to be running on the same machine or have a shared
-directory that supports UNIX domain sockets.
-
-Note that you need to start `osmo-msc` with the `--mncc-sock` option and point
-to the same file that osmo-sip-connector is configured to use. See the OsmoMSC
-manual for more information.
-
-The example config below assumes that OsmoMSC was started with the command
-line `osmo-msc -M /tmp/msc_mncc`.
-
-.Example: MNCC configuration
-----
-OsmoSIPcon(config)# mncc
-OsmoSIPcon(config-mncc)# socket-path /tmp/msc_mncc
-----
-
-=== Configuring SIP
-
-This section covers the SIP configuration. Source and destination IP and port
-can be set for the connection to the PBX.
-
-.Example: SIP configuration
-----
-OsmoSIPcon(config)# sip
-OsmoSIPcon(config-sip)# local 10.0.0.1 5060 <1>
-OsmoSIPcon(config-sip)# remote 10.0.0.2 5060 <2>
-----
-<1> The local IP/port to use
-<2> The remote SIP IP/port that the PBX uses
-
-There is also an option to use the IMSI as calling (source) address for
-MO- and as called (destination) address for MT-calls.
-
-.Example: Use IMSI instead of MSISDN
-----
-OsmoSIPcon(config)# app
-OsmoSIPcon(config-app)# use-imsi <1>
-----
-<1> Use the IMSI for MO calling and MT called address
-
-Since OsmoSIPConnector is just a shim between OsmoMSC and a proper SIP server
-this is the extent of the configuration. Setting up a dialplan and other
-SIP-related configuration should be done in the actual SIP server.
diff --git a/OsmoSIPConnector/chapters/overview.adoc b/OsmoSIPConnector/chapters/overview.adoc
deleted file mode 100644
index 24fe8b9..0000000
--- a/OsmoSIPConnector/chapters/overview.adoc
+++ /dev/null
@@ -1,48 +0,0 @@
-[[overview]]
-== Overview
-
-This manual should help you getting started with OsmoSIPConnector. It will
-cover aspects of configuring and running OsmoSIPConnector.
-
-[[intro_overview]]
-=== About OsmoSIPConnector
-
-OsmoSIPConnector translates between Mobile Network Call Control (MNCC)
-used in the GSM newtwork and Voice over IP SIP call control messages so that
-speech calls can traverse through the mobile network to SIP and vice versa. It
-has the following interfaces:
-
-- MNCC UNIX domain socket towards `osmo-msc`
-- SIP towards the PBX
-- The Osmocom typical telnet VTY interface.
-
-Find the OsmoSIPConnector issue tracker and wiki online at
-
-- https://osmocom.org/projects/osmo-sip-connector
-- https://osmocom.org/projects/osmo-sip-connector/wiki
-
-
-[[fig-gsm]]
-.Typical GSM network architecture used with OsmoSIPConnector
-[graphviz]
-----
-digraph G{
-  rankdir = LR;
-  "osmo-sip-connector" [color="red"];
-  OsmoMGWB [label="OsmoMGW\n(BSC)"];
-  OsmoMGWM [label="OsmoMGW\n(MSC)"];
-  MS -> BTS [label = "Um"];
-  BTS -> OsmoBSC [label = "Abis"];
-  OsmoBSC -> OsmoMSC [label = "AoIP" ];
-  OsmoMSC -> "osmo-sip-connector" [label = "MNCC"];
-  "osmo-sip-connector" -> "PBX" [label = "SIP"];
-  BTS -> OsmoMGWB [label = "RTP"];
-  OsmoMGWB -> OsmoMGWM [label = "RTP"];
-  OsmoMGWM -> "PBX" [label = "RTP"];
-  OsmoBSC -> OsmoMGWB [label = "MGCP" ];
-  OsmoMSC -> OsmoMGWM [label = "MGCP" ];
-  { rank = same; OsmoBSC; OsmoMGWB; }
-  { rank = same; OsmoMSC; OsmoMGWM; }
-}
-----
-
diff --git a/OsmoSIPConnector/chapters/running.adoc b/OsmoSIPConnector/chapters/running.adoc
deleted file mode 100644
index 85ccddc..0000000
--- a/OsmoSIPConnector/chapters/running.adoc
+++ /dev/null
@@ -1,84 +0,0 @@
-== Running OsmoSIPConnectoer
-
-The OsmoSIPConnector executable (`osmo-sip-connector`) offers the following
-command-line arguments:
-
-=== SYNOPSIS
-
-*osmo-sip-connector* [-h] [-c 'CONFIGFILE']
-
-=== OPTIONS
-
-*-h, --help*::
-	Print a short help message about the supported options
-*-c, --config-file 'CONFIGFILE'*::
-	Specify the file and path name of the configuration file to be
-	used. If none is specified, use `osmo-sip-connector.cfg` in the
-	current working directory.
-
-=== Colocation with OsmoMSC
-
-Since the MNCC interface used to communicate between OsmoMSC and
-OsmoSIPConnector is a UNIX domain socket both processes must run on the same
-machine or have a shared directory that supports sharing UNIX domain sockets.
-
-=== Multiple instances
-
-Running multiple instances of `osmo-sip-connector` on the same computer is
-possible if all interfaces (VTY, CTRL) are separated using the appropriate
-configuration options. The IP based interfaces are binding to local host by
-default. In order to separate the processes, the user has to bind those
-services to specific but different IP addresses and/or ports.
-
-The VTY and the Control interface can be bound to IP addresses from the
-loopback address range, for example:
-
-----
-line vty
- bind 127.0.0.2
-ctrl
- bind 127.0.0.2
-----
-
-For the SIP client a different IP/port combination also needs to be used, for
-example:
-
-----
-sip
- local 0.0.0.0 5061
-----
-
-The socket path for the MNCC interface also needs to change, which can be done
-with the following configuration snippet:
-
-----
-mncc
- socket-path /tmp/msc2_mncc
-----
-
-=== DTMF signaling
-
-In VoIP based telephony networks DTMF (Dual-tone multi-frequency signaling) can
-be signaled through multiple methods. Common methods are in-band, RFC2833 and
-sip-info messages.
-
-Osmo-sip-connector is using sip-info messages to signal DTMF tones. When a DTMF
-tone is signaled at the MNCC socket interface, osmo-sip-connector will generate
-a matching sip-info message to forward the DTMF signal to the PBX. Depending on
-the PBX software reconfiguring the DTMF signaling method to sip-info may be
-necessary.
-
-While sending DTMF tones through the MNCC interface to a SIP leg, the current
-implementation of osmo-sip-connector does not support sending DTMF tones in the
-opposite direction. Any attempts to send DTMF tones to an MNCC leg will be
-confirmed with a status 405 "Method not allowed".
-
-The reason for this limitation is that in mobile networks, depending on the
-signaling direction, the signaling of DTMF tones is implemented differently.
-A mobile originated DTMF tone is signaled through out of band messages,
-which arrive at osmo-sip-connector on as MNCC DTMF START/STOP messages. Those
-messages can be directly translated to sip-info messages. However, in the
-other direction (mobile terminated), an in-band signaling method is used. This
-means that osmo-sip-connector would have to translate an incoming DTMF sip-info
-message into an audio sample that then would have to be injected into the
-voice stream. Currently this scheme is not implemented in osmo-sip-connector.
\ No newline at end of file
diff --git a/OsmoSIPConnector/osmosipconnector-usermanual-docinfo.xml b/OsmoSIPConnector/osmosipconnector-usermanual-docinfo.xml
deleted file mode 100644
index 937e054..0000000
--- a/OsmoSIPConnector/osmosipconnector-usermanual-docinfo.xml
+++ /dev/null
@@ -1,46 +0,0 @@
-<revhistory>
-  <revision>
-    <revnumber>1</revnumber>
-    <date>August 04th, 2018</date>
-    <authorinitials>DW</authorinitials>
-    <revremark>
-      Initial version
-    </revremark>
-  </revision>
-</revhistory>
-
-<authorgroup>
-  <author>
-    <firstname>Daniel</firstname>
-    <surname>Willmann</surname>
-    <email>dwillmann at sysmocom.de</email>
-    <authorinitials>DW</authorinitials>
-    <affiliation>
-      <shortaffil>sysmocom</shortaffil>
-      <orgname>sysmocom - s.f.m.c. GmbH</orgname>
-    </affiliation>
-  </author>
-</authorgroup>
-
-<copyright>
-  <year>2018</year>
-  <holder>sysmocom - s.f.m.c. GmbH</holder>
-</copyright>
-
-<legalnotice>
-  <para>
-	Permission is granted to copy, distribute and/or modify this
-	document under the terms of the GNU Free Documentation License,
-	Version 1.3 or any later version published by the Free Software
-	Foundation; with the Invariant Sections being just 'Foreword',
-	'Acknowledgements' and 'Preface', with no Front-Cover Texts,
-	and no Back-Cover Texts.  A copy of the license is included in
-	the section entitled "GNU Free Documentation License".
-  </para>
-  <para>
-	The Asciidoc source code of this manual can be found at
-	<ulink url="http://git.osmocom.org/osmo-gsm-manuals/">
-		http://git.osmocom.org/osmo-gsm-manuals/
-	</ulink>
-  </para>
-</legalnotice>
diff --git a/OsmoSIPConnector/osmosipconnector-usermanual.adoc b/OsmoSIPConnector/osmosipconnector-usermanual.adoc
deleted file mode 100644
index 72d7127..0000000
--- a/OsmoSIPConnector/osmosipconnector-usermanual.adoc
+++ /dev/null
@@ -1,28 +0,0 @@
-:gfdl-enabled:
-:program-name: OsmoSIPConnector
-
-OsmoSIPConnector User Manual
-============================
-Daniel Willmann <dwillmann at sysmocom.de>
-
-
-include::./common/chapters/preface.adoc[]
-
-include::{srcdir}/chapters/overview.adoc[]
-
-include::{srcdir}/chapters/running.adoc[]
-
-include::./common/chapters/vty.adoc[]
-
-include::./common/chapters/logging.adoc[]
-
-include::{srcdir}/chapters/configuration.adoc[]
-
-include::./common/chapters/port_numbers.adoc[]
-
-include::./common/chapters/bibliography.adoc[]
-
-include::./common/chapters/glossary.adoc[]
-
-include::./common/chapters/gfdl.adoc[]
-
diff --git a/OsmoSIPConnector/osmosipconnector-vty-reference.xml b/OsmoSIPConnector/osmosipconnector-vty-reference.xml
deleted file mode 100644
index 0eeb952..0000000
--- a/OsmoSIPConnector/osmosipconnector-vty-reference.xml
+++ /dev/null
@@ -1,38 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
-  ex:ts=2:sw=42sts=2:et
-  -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
--->
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML 5.0//EN"
-"http://docbook.org/xml/5.0/dtd/docbook.dtd" [
-<!ENTITY chapter-vty      SYSTEM      "./common/chapters/vty.xml" >
-<!ENTITY sections-vty     SYSTEM      "generated/docbook_vty.xml"  >
-]>
-
-<book>
-  <info>
-    <revhistory>
-        <revision>
-            <revnumber>v1</revnumber>
-            <date>21st August 2018</date>
-            <authorinitials>dw</authorinitials>
-            <revremark>Initial</revremark>
-        </revision>
-    </revhistory>
-
-    <title>OsmoSIPConnector VTY Reference</title>
-
-    <copyright>
-      <year>2018</year>
-    </copyright>
-
-    <legalnotice>
-      <para>This work is copyright by <orgname>sysmocom - s.f.m.c. GmbH</orgname>. All rights reserved.
-      </para>
-    </legalnotice>
-  </info>
-
-  <!-- Main chapters-->
-  &chapter-vty;
-</book>
-
diff --git a/OsmoSIPConnector/vty/sipconn_vty_additions.xml b/OsmoSIPConnector/vty/sipconn_vty_additions.xml
deleted file mode 100644
index a4c675e..0000000
--- a/OsmoSIPConnector/vty/sipconn_vty_additions.xml
+++ /dev/null
@@ -1,2 +0,0 @@
-<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
-</vtydoc>
diff --git a/OsmoSIPConnector/vty/sipconn_vty_reference.xml b/OsmoSIPConnector/vty/sipconn_vty_reference.xml
deleted file mode 100644
index dee42e6..0000000
--- a/OsmoSIPConnector/vty/sipconn_vty_reference.xml
+++ /dev/null
@@ -1,1132 +0,0 @@
-<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
-  <node id='_common_cmds_'>
-    <name>Common Commands</name>
-    <description>These commands are available on all VTY nodes. They are listed here only once, to unclutter the VTY reference.</description>
-    <command id='help'>
-      <params>
-        <param name='help' doc='Description of the interactive help system' />
-      </params>
-    </command>
-    <command id='list'>
-      <params>
-        <param name='list' doc='Print command list' />
-      </params>
-    </command>
-    <command id='write terminal'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='terminal' doc='Write to terminal' />
-      </params>
-    </command>
-    <command id='write file'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='file' doc='Write to configuration file' />
-      </params>
-    </command>
-    <command id='write memory'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='memory' doc='Write configuration to the file (same as write file)' />
-      </params>
-    </command>
-    <command id='write'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-      </params>
-    </command>
-    <command id='show running-config'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='running-config' doc='running configuration' />
-      </params>
-    </command>
-    <command id='exit'>
-      <params>
-        <param name='exit' doc='Exit current mode and down to previous mode' />
-      </params>
-    </command>
-    <command id='end'>
-      <params>
-        <param name='end' doc='End current mode and change to enable mode.' />
-      </params>
-    </command>
-  </node>
-  <node id='view'>
-    <name>view</name>
-    <command id='show version'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='version' doc='Displays program version' />
-      </params>
-    </command>
-    <command id='show online-help'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='online-help' doc='Online help' />
-      </params>
-    </command>
-    <command id='enable'>
-      <params>
-        <param name='enable' doc='Turn on privileged mode command' />
-      </params>
-    </command>
-    <command id='terminal length <0-512>'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='length' doc='Set number of lines on a screen' />
-        <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' />
-      </params>
-    </command>
-    <command id='terminal no length'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='length' doc='Set number of lines on a screen' />
-      </params>
-    </command>
-    <command id='who'>
-      <params>
-        <param name='who' doc='Display who is on vty' />
-      </params>
-    </command>
-    <command id='show history'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='history' doc='Display the session command history' />
-      </params>
-    </command>
-    <command id='show calls'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='calls' doc='Current calls' />
-      </params>
-    </command>
-    <command id='show calls summary'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='calls' doc='Current calls' />
-        <param name='summary' doc='Brief overview' />
-      </params>
-    </command>
-    <command id='show mncc-connection'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='mncc-connection' doc='MNCC Connection state' />
-      </params>
-    </command>
-    <command id='logging enable'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='enable' doc='Enables logging to this vty' />
-      </params>
-    </command>
-    <command id='logging disable'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='disable' doc='Disables logging to this vty' />
-      </params>
-    </command>
-    <command id='logging filter all (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='filter' doc='Filter log messages' />
-        <param name='all' doc='Do you want to log all messages?' />
-        <param name='0' doc='Only print messages matched by other filters' />
-        <param name='1' doc='Bypass filter and print all messages' />
-      </params>
-    </command>
-    <command id='logging color (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='color' doc='Configure color-printing for log messages' />
-        <param name='0' doc='Don't use color for printing messages' />
-        <param name='1' doc='Use color for printing messages' />
-      </params>
-    </command>
-    <command id='logging timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp' />
-      </params>
-    </command>
-    <command id='logging print extended-timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='extended-timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
-      </params>
-    </command>
-    <command id='logging print category (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='category' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with category/subsystem name' />
-      </params>
-    </command>
-    <command id='logging print category-hex (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='category-hex' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' />
-      </params>
-    </command>
-    <command id='logging print level (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='level' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with the log level name' />
-      </params>
-    </command>
-    <command id='logging print file (0|1|basename) [last]'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='file' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with the source file and line' />
-        <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' />
-        <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
-      </params>
-    </command>
-    <command id='logging set-log-mask MASK'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='set-log-mask' doc='Set the logmask of this logging target' />
-        <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
-      </params>
-    </command>
-    <command id='logging level (sip|mncc|app|call|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='sip' doc='SIP interface' />
-        <param name='mncc' doc='MNCC interface' />
-        <param name='app' doc='Application interface' />
-        <param name='call' doc='Call management' />
-        <param name='lglobal' doc='Library-internal global log family' />
-        <param name='llapd' doc='LAPD in libosmogsm' />
-        <param name='linp' doc='A-bis Intput Subsystem' />
-        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
-        <param name='lmi' doc='A-bis Input Driver for Signalling' />
-        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
-        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
-        <param name='lctrl' doc='Control Interface' />
-        <param name='lgtp' doc='GPRS GTP library' />
-        <param name='lstats' doc='Statistics messages and logging' />
-        <param name='lgsup' doc='Generic Subscriber Update Protocol' />
-        <param name='loap' doc='Osmocom Authentication Protocol' />
-        <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
-        <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
-        <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
-        <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
-        <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
-        <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='logging level set-all (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='logging level force-all (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='no logging level force-all'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' />
-      </params>
-    </command>
-    <command id='show logging vty'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='logging' doc='Show current logging configuration' />
-        <param name='vty' doc='Show current logging configuration for this vty' />
-      </params>
-    </command>
-    <command id='show alarms'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='alarms' doc='Show current logging configuration' />
-      </params>
-    </command>
-    <command id='show stats'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='stats' doc='Show statistical values' />
-      </params>
-    </command>
-    <command id='show stats level (global|peer|subscriber)'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='stats' doc='Show statistical values' />
-        <param name='level' doc='Set the maximum group level' />
-        <param name='global' doc='Show global groups only' />
-        <param name='peer' doc='Show global and network peer related groups' />
-        <param name='subscriber' doc='Show global, peer, and subscriber groups' />
-      </params>
-    </command>
-    <command id='show asciidoc counters'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='asciidoc' doc='Asciidoc generation' />
-        <param name='counters' doc='Generate table of all registered counters' />
-      </params>
-    </command>
-    <command id='show rate-counters'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='rate-counters' doc='Show all rate counters' />
-      </params>
-    </command>
-  </node>
-  <node id='enable'>
-    <name>enable</name>
-    <command id='disable'>
-      <params>
-        <param name='disable' doc='Turn off privileged mode command' />
-      </params>
-    </command>
-    <command id='configure terminal'>
-      <params>
-        <param name='configure' doc='Configuration from vty interface' />
-        <param name='terminal' doc='Configuration terminal' />
-      </params>
-    </command>
-    <command id='copy running-config startup-config'>
-      <params>
-        <param name='copy' doc='Copy configuration' />
-        <param name='running-config' doc='Copy running config to... ' />
-        <param name='startup-config' doc='Copy running config to startup config (same as write file)' />
-      </params>
-    </command>
-    <command id='show startup-config'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='startup-config' doc='Contentes of startup configuration' />
-      </params>
-    </command>    <command id='show version'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='version' doc='Displays program version' />
-      </params>
-    </command>
-    <command id='show online-help'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='online-help' doc='Online help' />
-      </params>
-    </command>
-    <command id='terminal length <0-512>'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='length' doc='Set number of lines on a screen' />
-        <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' />
-      </params>
-    </command>
-    <command id='terminal no length'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='length' doc='Set number of lines on a screen' />
-      </params>
-    </command>
-    <command id='who'>
-      <params>
-        <param name='who' doc='Display who is on vty' />
-      </params>
-    </command>
-    <command id='show history'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='history' doc='Display the session command history' />
-      </params>
-    </command>
-    <command id='terminal monitor'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='monitor' doc='Copy debug output to the current terminal line' />
-      </params>
-    </command>
-    <command id='terminal no monitor'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='monitor' doc='Copy debug output to the current terminal line' />
-      </params>
-    </command>
-    <command id='show calls'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='calls' doc='Current calls' />
-      </params>
-    </command>
-    <command id='show calls summary'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='calls' doc='Current calls' />
-        <param name='summary' doc='Brief overview' />
-      </params>
-    </command>
-    <command id='show mncc-connection'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='mncc-connection' doc='MNCC Connection state' />
-      </params>
-    </command>
-    <command id='logging enable'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='enable' doc='Enables logging to this vty' />
-      </params>
-    </command>
-    <command id='logging disable'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='disable' doc='Disables logging to this vty' />
-      </params>
-    </command>
-    <command id='logging filter all (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='filter' doc='Filter log messages' />
-        <param name='all' doc='Do you want to log all messages?' />
-        <param name='0' doc='Only print messages matched by other filters' />
-        <param name='1' doc='Bypass filter and print all messages' />
-      </params>
-    </command>
-    <command id='logging color (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='color' doc='Configure color-printing for log messages' />
-        <param name='0' doc='Don't use color for printing messages' />
-        <param name='1' doc='Use color for printing messages' />
-      </params>
-    </command>
-    <command id='logging timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp' />
-      </params>
-    </command>
-    <command id='logging print extended-timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='extended-timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
-      </params>
-    </command>
-    <command id='logging print category (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='category' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with category/subsystem name' />
-      </params>
-    </command>
-    <command id='logging print category-hex (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='category-hex' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' />
-      </params>
-    </command>
-    <command id='logging print level (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='level' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with the log level name' />
-      </params>
-    </command>
-    <command id='logging print file (0|1|basename) [last]'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='file' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with the source file and line' />
-        <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' />
-        <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
-      </params>
-    </command>
-    <command id='logging set-log-mask MASK'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='set-log-mask' doc='Set the logmask of this logging target' />
-        <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
-      </params>
-    </command>
-    <command id='logging level (sip|mncc|app|call|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='sip' doc='SIP interface' />
-        <param name='mncc' doc='MNCC interface' />
-        <param name='app' doc='Application interface' />
-        <param name='call' doc='Call management' />
-        <param name='lglobal' doc='Library-internal global log family' />
-        <param name='llapd' doc='LAPD in libosmogsm' />
-        <param name='linp' doc='A-bis Intput Subsystem' />
-        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
-        <param name='lmi' doc='A-bis Input Driver for Signalling' />
-        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
-        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
-        <param name='lctrl' doc='Control Interface' />
-        <param name='lgtp' doc='GPRS GTP library' />
-        <param name='lstats' doc='Statistics messages and logging' />
-        <param name='lgsup' doc='Generic Subscriber Update Protocol' />
-        <param name='loap' doc='Osmocom Authentication Protocol' />
-        <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
-        <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
-        <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
-        <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
-        <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
-        <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='logging level set-all (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='logging level force-all (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='no logging level force-all'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' />
-      </params>
-    </command>
-    <command id='show logging vty'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='logging' doc='Show current logging configuration' />
-        <param name='vty' doc='Show current logging configuration for this vty' />
-      </params>
-    </command>
-    <command id='show alarms'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='alarms' doc='Show current logging configuration' />
-      </params>
-    </command>
-    <command id='show stats'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='stats' doc='Show statistical values' />
-      </params>
-    </command>
-    <command id='show stats level (global|peer|subscriber)'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='stats' doc='Show statistical values' />
-        <param name='level' doc='Set the maximum group level' />
-        <param name='global' doc='Show global groups only' />
-        <param name='peer' doc='Show global and network peer related groups' />
-        <param name='subscriber' doc='Show global, peer, and subscriber groups' />
-      </params>
-    </command>
-    <command id='show asciidoc counters'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='asciidoc' doc='Asciidoc generation' />
-        <param name='counters' doc='Generate table of all registered counters' />
-      </params>
-    </command>
-    <command id='show rate-counters'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='rate-counters' doc='Show all rate counters' />
-      </params>
-    </command>
-  </node>
-  <node id='config'>
-    <name>config</name>
-    <command id='hostname WORD'>
-      <params>
-        <param name='hostname' doc='Set system's network name' />
-        <param name='WORD' doc='This system's network name' />
-      </params>
-    </command>
-    <command id='no hostname [HOSTNAME]'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='hostname' doc='Reset system's network name' />
-        <param name='[HOSTNAME]' doc='Host name of this router' />
-      </params>
-    </command>
-    <command id='password (8|) WORD'>
-      <params>
-        <param name='password' doc='Assign the terminal connection password' />
-        <param name='8' doc='Specifies a HIDDEN password will follow' />
-        <param name='' doc='dummy string ' />
-        <param name='WORD' doc='The HIDDEN line password string' />
-      </params>
-    </command>
-    <command id='password LINE'>
-      <params>
-        <param name='password' doc='Assign the terminal connection password' />
-        <param name='LINE' doc='The UNENCRYPTED (cleartext) line password' />
-      </params>
-    </command>
-    <command id='enable password (8|) WORD'>
-      <params>
-        <param name='enable' doc='Modify enable password parameters' />
-        <param name='password' doc='Assign the privileged level password' />
-        <param name='8' doc='Specifies a HIDDEN password will follow' />
-        <param name='' doc='dummy string ' />
-        <param name='WORD' doc='The HIDDEN 'enable' password string' />
-      </params>
-    </command>
-    <command id='enable password LINE'>
-      <params>
-        <param name='enable' doc='Modify enable password parameters' />
-        <param name='password' doc='Assign the privileged level password' />
-        <param name='LINE' doc='The UNENCRYPTED (cleartext) 'enable' password' />
-      </params>
-    </command>
-    <command id='no enable password'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='enable' doc='Modify enable password parameters' />
-        <param name='password' doc='Assign the privileged level password' />
-      </params>
-    </command>
-    <command id='banner motd default'>
-      <params>
-        <param name='banner' doc='Set banner string' />
-        <param name='motd' doc='Strings for motd' />
-        <param name='default' doc='Default string' />
-      </params>
-    </command>
-    <command id='banner motd file [FILE]'>
-      <params>
-        <param name='banner' doc='Set banner' />
-        <param name='motd' doc='Banner for motd' />
-        <param name='file' doc='Banner from a file' />
-        <param name='[FILE]' doc='Filename' />
-      </params>
-    </command>
-    <command id='no banner motd'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='banner' doc='Set banner string' />
-        <param name='motd' doc='Strings for motd' />
-      </params>
-    </command>
-    <command id='service terminal-length <0-512>'>
-      <params>
-        <param name='service' doc='Set up miscellaneous service' />
-        <param name='terminal-length' doc='System wide terminal length configuration' />
-        <param name='<0-512>' doc='Number of lines of VTY (0 means no line control)' />
-      </params>
-    </command>
-    <command id='no service terminal-length [<0-512>]'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='service' doc='Set up miscellaneous service' />
-        <param name='terminal-length' doc='System wide terminal length configuration' />
-        <param name='[<0-512>]' doc='Number of lines of VTY (0 means no line control)' />
-      </params>
-    </command>
-    <command id='line vty'>
-      <params>
-        <param name='line' doc='Configure a terminal line' />
-        <param name='vty' doc='Virtual terminal' />
-      </params>
-    </command>
-    <command id='service advanced-vty'>
-      <params>
-        <param name='service' doc='Set up miscellaneous service' />
-        <param name='advanced-vty' doc='Enable advanced mode vty interface' />
-      </params>
-    </command>
-    <command id='no service advanced-vty'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='service' doc='Set up miscellaneous service' />
-        <param name='advanced-vty' doc='Enable advanced mode vty interface' />
-      </params>
-    </command>
-    <command id='show history'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='history' doc='Display the session command history' />
-      </params>
-    </command>
-    <command id='sip'>
-      <params>
-        <param name='sip' doc='SIP related commands' />
-      </params>
-    </command>
-    <command id='mncc'>
-      <params>
-        <param name='mncc' doc='MNCC' />
-      </params>
-    </command>
-    <command id='app'>
-      <params>
-        <param name='app' doc='Application Handling' />
-      </params>
-    </command>
-    <command id='log stderr'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='stderr' doc='Logging via STDERR of the process' />
-      </params>
-    </command>
-    <command id='no log stderr'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='stderr' doc='Logging via STDERR of the process' />
-      </params>
-    </command>
-    <command id='log file .FILENAME'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='file' doc='Logging to text file' />
-        <param name='.FILENAME' doc='Filename' />
-      </params>
-    </command>
-    <command id='no log file .FILENAME'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='file' doc='Logging to text file' />
-        <param name='.FILENAME' doc='Filename' />
-      </params>
-    </command>
-    <command id='log alarms <2-32700>'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='alarms' doc='Logging alarms to osmo_strrb' />
-        <param name='<2-32700>' doc='Maximum number of messages to log' />
-      </params>
-    </command>
-    <command id='no log alarms'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='alarms' doc='Logging alarms to osmo_strrb' />
-      </params>
-    </command>
-    <command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='syslog' doc='Logging via syslog' />
-        <param name='authpriv' doc='Security/authorization messages facility' />
-        <param name='cron' doc='Clock daemon (cron/at) facility' />
-        <param name='daemon' doc='General system daemon facility' />
-        <param name='ftp' doc='Ftp daemon facility' />
-        <param name='lpr' doc='Line printer facility' />
-        <param name='mail' doc='Mail facility' />
-        <param name='news' doc='News facility' />
-        <param name='user' doc='Generic facility' />
-        <param name='uucp' doc='UUCP facility' />
-      </params>
-    </command>
-    <command id='log syslog local <0-7>'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='syslog' doc='Logging via syslog' />
-        <param name='local' doc='Syslog LOCAL facility' />
-        <param name='<0-7>' doc='Local facility number' />
-      </params>
-    </command>
-    <command id='no log syslog'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='syslog' doc='Logging via syslog' />
-      </params>
-    </command>
-    <command id='log gsmtap [HOSTNAME]'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='gsmtap' doc='Logging via GSMTAP' />
-        <param name='[HOSTNAME]' doc='Host name to send the GSMTAP logging to (UDP port 4729)' />
-      </params>
-    </command>
-    <command id='stats reporter statsd'>
-      <params>
-        <param name='stats' doc='Configure stats sub-system' />
-        <param name='reporter' doc='Configure a stats reporter' />
-        <param name='statsd' doc='Report to a STATSD server' />
-      </params>
-    </command>
-    <command id='no stats reporter statsd'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='stats' doc='Configure stats sub-system' />
-        <param name='reporter' doc='Configure a stats reporter' />
-        <param name='statsd' doc='Report to a STATSD server' />
-      </params>
-    </command>
-    <command id='stats reporter log'>
-      <params>
-        <param name='stats' doc='Configure stats sub-system' />
-        <param name='reporter' doc='Configure a stats reporter' />
-        <param name='log' doc='Report to the logger' />
-      </params>
-    </command>
-    <command id='no stats reporter log'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='stats' doc='Configure stats sub-system' />
-        <param name='reporter' doc='Configure a stats reporter' />
-        <param name='log' doc='Report to the logger' />
-      </params>
-    </command>
-    <command id='stats interval <1-65535>'>
-      <params>
-        <param name='stats' doc='Configure stats sub-system' />
-        <param name='interval' doc='Set the reporting interval' />
-        <param name='<1-65535>' doc='Interval in seconds' />
-      </params>
-    </command>
-  </node>
-  <node id='config-log'>
-    <name>config-log</name>
-    <command id='logging filter all (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='filter' doc='Filter log messages' />
-        <param name='all' doc='Do you want to log all messages?' />
-        <param name='0' doc='Only print messages matched by other filters' />
-        <param name='1' doc='Bypass filter and print all messages' />
-      </params>
-    </command>
-    <command id='logging color (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='color' doc='Configure color-printing for log messages' />
-        <param name='0' doc='Don't use color for printing messages' />
-        <param name='1' doc='Use color for printing messages' />
-      </params>
-    </command>
-    <command id='logging timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp' />
-      </params>
-    </command>
-    <command id='logging print extended-timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='extended-timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
-      </params>
-    </command>
-    <command id='logging print category (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='category' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with category/subsystem name' />
-      </params>
-    </command>
-    <command id='logging print category-hex (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='category-hex' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' />
-      </params>
-    </command>
-    <command id='logging print level (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='level' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with the log level name' />
-      </params>
-    </command>
-    <command id='logging print file (0|1|basename) [last]'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='file' doc='Configure log message' />
-        <param name='0' doc='Don't prefix each log message' />
-        <param name='1' doc='Prefix each log message with the source file and line' />
-        <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' />
-        <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
-      </params>
-    </command>
-    <command id='logging level (sip|mncc|app|call|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='sip' doc='SIP interface' />
-        <param name='mncc' doc='MNCC interface' />
-        <param name='app' doc='Application interface' />
-        <param name='call' doc='Call management' />
-        <param name='lglobal' doc='Library-internal global log family' />
-        <param name='llapd' doc='LAPD in libosmogsm' />
-        <param name='linp' doc='A-bis Intput Subsystem' />
-        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
-        <param name='lmi' doc='A-bis Input Driver for Signalling' />
-        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
-        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
-        <param name='lctrl' doc='Control Interface' />
-        <param name='lgtp' doc='GPRS GTP library' />
-        <param name='lstats' doc='Statistics messages and logging' />
-        <param name='lgsup' doc='Generic Subscriber Update Protocol' />
-        <param name='loap' doc='Osmocom Authentication Protocol' />
-        <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
-        <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
-        <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
-        <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
-        <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
-        <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='logging level set-all (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='logging level force-all (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='no logging level force-all'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' />
-      </params>
-    </command>
-  </node>
-  <node id='config-stats'>
-    <name>config-stats</name>
-    <command id='local-ip ADDR'>
-      <params>
-        <param name='local-ip' doc='Set the IP address to which we bind locally' />
-        <param name='ADDR' doc='IP Address' />
-      </params>
-    </command>
-    <command id='no local-ip'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='local-ip' doc='Set the IP address to which we bind locally' />
-      </params>
-    </command>
-    <command id='remote-ip ADDR'>
-      <params>
-        <param name='remote-ip' doc='Set the remote IP address to which we connect' />
-        <param name='ADDR' doc='IP Address' />
-      </params>
-    </command>
-    <command id='remote-port <1-65535>'>
-      <params>
-        <param name='remote-port' doc='Set the remote port to which we connect' />
-        <param name='<1-65535>' doc='Remote port number' />
-      </params>
-    </command>
-    <command id='mtu <100-65535>'>
-      <params>
-        <param name='mtu' doc='Set the maximum packet size' />
-        <param name='<100-65535>' doc='Size in byte' />
-      </params>
-    </command>
-    <command id='no mtu'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='mtu' doc='Set the maximum packet size' />
-      </params>
-    </command>
-    <command id='prefix PREFIX'>
-      <params>
-        <param name='prefix' doc='Set the item name prefix' />
-        <param name='PREFIX' doc='The prefix string' />
-      </params>
-    </command>
-    <command id='no prefix'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='prefix' doc='Set the item name prefix' />
-      </params>
-    </command>
-    <command id='level (global|peer|subscriber)'>
-      <params>
-        <param name='level' doc='Set the maximum group level' />
-        <param name='global' doc='Report global groups only' />
-        <param name='peer' doc='Report global and network peer related groups' />
-        <param name='subscriber' doc='Report global, peer, and subscriber groups' />
-      </params>
-    </command>
-    <command id='enable'>
-      <params>
-        <param name='enable' doc='Enable the reporter' />
-      </params>
-    </command>
-    <command id='disable'>
-      <params>
-        <param name='disable' doc='Disable the reporter' />
-      </params>
-    </command>
-  </node>
-  <node id='config-line'>
-    <name>config-line</name>
-    <command id='login'>
-      <params>
-        <param name='login' doc='Enable password checking' />
-      </params>
-    </command>
-    <command id='no login'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='login' doc='Enable password checking' />
-      </params>
-    </command>
-    <command id='bind A.B.C.D'>
-      <params>
-        <param name='bind' doc='Accept VTY telnet connections on local interface' />
-        <param name='A.B.C.D' doc='Local interface IP address (default: 127.0.0.1)' />
-      </params>
-    </command>
-  </node>
-  <node id='config-sip'>
-    <name>config-sip</name>
-    <command id='local A.B.C.D <1-65534>'>
-      <params>
-        <param name='local' doc='Local information' />
-        <param name='A.B.C.D' doc='IPv4 bind address' />
-        <param name='<1-65534>' doc='port' />
-      </params>
-    </command>
-    <command id='remote ADDR <1-65534>'>
-      <params>
-        <param name='remote' doc='Remore information' />
-        <param name='ADDR' doc='SIP hostname' />
-        <param name='<1-65534>' doc='port' />
-      </params>
-    </command>
-    <command id='sofia-sip log-level <0-9>'>
-      <params>
-        <param name='sofia-sip' doc='sofia-sip library configuration' />
-        <param name='log-level' doc='global log-level for sofia-sip' />
-        <param name='<0-9>' doc='(0 = nothing, 9 = super-verbose)' />
-      </params>
-    </command>
-  </node>
-  <node id='config-mncc'>
-    <name>config-mncc</name>
-    <command id='socket-path NAME'>
-      <params>
-        <param name='socket-path' doc='MNCC filepath' />
-        <param name='NAME' doc='Filename' />
-      </params>
-    </command>
-  </node>
-  <node id='config-app'>
-    <name>config-app</name>
-    <command id='use-imsi'>
-      <params>
-        <param name='use-imsi' doc='Use the IMSI for MO calling and MT called address' />
-      </params>
-    </command>
-    <command id='no use-imsi'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='use-imsi' doc='Use the IMSI for MO calling and MT called address' />
-      </params>
-    </command>
-  </node>
-</vtydoc>
diff --git a/configure.ac b/configure.ac
index 7eabd3a..e036384 100644
--- a/configure.ac
+++ b/configure.ac
@@ -32,7 +32,6 @@
     OsmoMGCP/Makefile
     OsmoNAT/Makefile
     OsmoNITB/Makefile
-    OsmoSIPConnector/Makefile
     OsmoSTP/Makefile
     OsmoTRX/Makefile
     OsmocomBB/Makefile)

-- 
To view, visit https://gerrit.osmocom.org/11968
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings

Gerrit-Project: osmo-gsm-manuals
Gerrit-Branch: master
Gerrit-MessageType: newchange
Gerrit-Change-Id: Id77812586eb21932b563b57e75cd85b721b7d6ab
Gerrit-Change-Number: 11968
Gerrit-PatchSet: 1
Gerrit-Owner: osmith <osmith at sysmocom.de>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20181128/3d84cb33/attachment.htm>


More information about the gerrit-log mailing list