This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
osmith gerrit-no-reply at lists.osmocom.orgosmith has uploaded this change for review. ( https://gerrit.osmocom.org/11805
Change subject: copy NITB's osmobsc-usermanual.adoc to OsmoBSC
......................................................................
copy NITB's osmobsc-usermanual.adoc to OsmoBSC
Includes from other projects don't work anymore when moving project
specific manuals into other repositories.
(moving manuals to project repositories 13/16)
Related: OS#3385
Change-Id: I96933dd4dd6cac159847647f1c642215051a9aad
---
A OsmoBSC/chapters/bts-examples.adoc
M OsmoBSC/osmobsc-usermanual.adoc
2 files changed, 282 insertions(+), 1 deletion(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-gsm-manuals refs/changes/05/11805/1
diff --git a/OsmoBSC/chapters/bts-examples.adoc b/OsmoBSC/chapters/bts-examples.adoc
new file mode 100644
index 0000000..b15fb99
--- /dev/null
+++ b/OsmoBSC/chapters/bts-examples.adoc
@@ -0,0 +1,281 @@
+[[bts-examples]]
+== OsmoNITB example configuration files
+
+The `openbsc/doc/examples/osmo-nitb` directory in the OpenBSC source
+tree contains a collection of example configuration files, sorted by BTS
+type.
+
+This chapter is illustrating some excerpts from those examples
+
+[[bts_example_bs11]]
+=== Example configuration for OsmoNITB with one dual-TRX BS-11
+
+.OsmoNITB with BS11, 2 TRX, no frequency hopping
+====
+
+----
+e1_input
+ e1_line 0 driver misdn
+network
+ network country code 1
+ mobile network code 1
+ short name OpenBSC
+ long name OpenBSC
+ timer t3101 10
+ timer t3113 60
+ bts 0
+ type bs11 <1>
+ band GSM900
+ cell_identity 1
+ location_area_code 1
+ training_sequence_code 7
+ base_station_id_code 63
+ oml e1 line 0 timeslot 1 sub-slot full <2>
+ oml e1 tei 25 <3>
+ trx 0
+ arfcn 121
+ max_power_red 0
+ rsl e1 line 0 timeslot 1 sub-slot full <4>
+ rsl e1 tei 1 <5>
+ timeslot 0
+ phys_chan_config CCCH+SDCCH4
+ e1 line 0 timeslot 1 sub-slot full
+ timeslot 1
+ phys_chan_config TCH/F
+ e1 line 0 timeslot 2 sub-slot 1 <6>
+ timeslot 2
+ phys_chan_config TCH/F
+ e1 line 0 timeslot 2 sub-slot 2
+ timeslot 3
+ phys_chan_config TCH/F
+ e1 line 0 timeslot 2 sub-slot 3
+ timeslot 4
+ phys_chan_config TCH/F
+ e1 line 0 timeslot 3 sub-slot 0
+ timeslot 5
+ phys_chan_config TCH/F
+ e1 line 0 timeslot 3 sub-slot 1
+ timeslot 6
+ phys_chan_config TCH/F
+ e1 line 0 timeslot 3 sub-slot 2
+ timeslot 7
+ phys_chan_config TCH/F
+ e1 line 0 timeslot 3 sub-slot 3
+ trx 1
+ arfcn 123
+ max_power_red 0
+ rsl e1 line 0 timeslot 1 sub-slot full <4>
+ rsl e1 tei 2 <5>
+ timeslot 0
+ phys_chan_config TCH/F
+ e1 line 0 timeslot 4 sub-slot 0 <6>
+ timeslot 1
+ phys_chan_config TCH/F
+ e1 line 0 timeslot 4 sub-slot 1
+ timeslot 2
+ phys_chan_config TCH/F
+ e1 line 0 timeslot 4 sub-slot 2
+ timeslot 3
+ phys_chan_config TCH/F
+ e1 line 0 timeslot 4 sub-slot 3
+ timeslot 4
+ phys_chan_config TCH/F
+ e1 line 0 timeslot 5 sub-slot 0
+ timeslot 5
+ phys_chan_config TCH/F
+ e1 line 0 timeslot 5 sub-slot 1
+ timeslot 6
+ phys_chan_config TCH/F
+ e1 line 0 timeslot 5 sub-slot 2
+ timeslot 7
+ phys_chan_config TCH/F
+ e1 line 0 timeslot 5 sub-slot 3
+----
+====
+
+<1> The BTS type must be set to __bs11__
+<2> The OML E1 timeslot needs to be identical with what was on the BTS side using LMT.
+<3> The OML TEI value needs to be identical with what was configured on the BTS side using LMT.
+<4> The RSL E1 timeslot can be identical for all TRX.
+<5> The RSL TEI values __must__ be different if multiple TRX share one E1 signalling timeslot.
+<6> The TCH all need to be allocated one 16k sub-slot on the E1
+
+[[bts_example_nbts]]
+=== Example configuration for OsmoNITB with one single-TRX nanoBTS
+
+.OsmoNITB with one single-TRX nanoBTS
+====
+
+----
+e1_input
+ e1_line 0 driver ipa <1>
+network
+ network country code 1
+ mobile network code 1
+ short name OpenBSC
+ long name OpenBSC
+ auth policy closed
+ location updating reject cause 13
+ encryption a5 0
+ neci 1
+ rrlp mode none
+ mm info 1
+ handover 0
+ bts 0
+ type nanobts <2>
+ band DCS1800 <3>
+ cell_identity 0
+ location_area_code 1
+ training_sequence_code 7
+ base_station_id_code 63
+ ms max power 15
+ cell reselection hysteresis 4
+ rxlev access min 0
+ channel allocator ascending
+ rach tx integer 9
+ rach max transmission 7
+ ip.access unit_id 1801 0 <4>
+ oml ip.access stream_id 255 line 0
+ gprs mode none
+ trx 0
+ rf_locked 0
+ arfcn 871 <5>
+ nominal power 23
+ max_power_red 20 <6>
+ rsl e1 tei 0
+ timeslot 0
+ phys_chan_config CCCH+SDCCH4
+ timeslot 1
+ phys_chan_config SDCCH8
+ timeslot 2
+ phys_chan_config TCH/F
+ timeslot 3
+ phys_chan_config TCH/F
+ timeslot 4
+ phys_chan_config TCH/F
+ timeslot 5
+ phys_chan_config TCH/F
+ timeslot 6
+ phys_chan_config TCH/F
+ timeslot 7
+ phys_chan_config TCH/F
+----
+====
+
+<1> You have to configure one virtual E1 line with the
+ IPA driver in order to use Abis/IP. One e1_line is
+ sufficient for any number of A-bis/IP BTSs, there is no
+ limit like in physical E1 lines.
+<2> The BTS type must be set using `type nanobts`
+<3> The GSM band must be set according to the BTS hardware.
+<4> The IPA Unit ID parameter must be set to what has been configured on
+ the BTS side using the __BTS Manager__ or `ipaccess-config`.
+<5> The ARFCN of the BTS.
+<6> All known nanoBTS units have a nominal transmit power of 23 dBm. If
+ a `max_power_red` of 20 (dB) is configured, the resulting output
+ power at the BTS Tx port is 23 - 20 = 3 dBm.
+
+[NOTE]
+====
+The `nominal_power` setting does __not__ influence the transmitted power
+to the BTS! It is a setting by which the system administrator tells the
+BSC about the nominal output power of the BTS. The BSC uses this as
+basis for calculations.
+====
+
+
+[[bts_example_nbts_multi]]
+=== Example configuration for OsmoNITB with multi-TRX nanoBTS
+
+.OsmoNITB configured for dual-TRX (stacked) nanoBTS
+====
+
+----
+e1_input
+ e1_line 0 driver ipa
+network
+ network country code 1
+ mobile network code 1
+ short name OpenBSC
+ long name OpenBSC
+ auth policy closed
+ location updating reject cause 13
+ encryption a5 0
+ neci 1
+ rrlp mode none
+ mm info 0
+ handover 0
+ bts 0
+ type nanobts
+ band DCS1800
+ cell_identity 0
+ location_area_code 1
+ training_sequence_code 7
+ base_station_id_code 63
+ ms max power 15
+ cell reselection hysteresis 4
+ rxlev access min 0
+ channel allocator ascending
+ rach tx integer 9
+ rach max transmission 7
+ ip.access unit_id 1800 0 <1>
+ oml ip.access stream_id 255 line 0
+ gprs mode none
+ trx 0
+ rf_locked 0
+ arfcn 871
+ nominal power 23
+ max_power_red 0
+ rsl e1 tei 0
+ timeslot 0
+ phys_chan_config CCCH+SDCCH4
+ timeslot 1
+ phys_chan_config SDCCH8
+ timeslot 2
+ phys_chan_config TCH/F
+ timeslot 3
+ phys_chan_config TCH/F
+ timeslot 4
+ phys_chan_config TCH/F
+ timeslot 5
+ phys_chan_config TCH/F
+ timeslot 6
+ phys_chan_config TCH/F
+ timeslot 7
+ phys_chan_config TCH/F
+ trx 1
+ rf_locked 0
+ arfcn 873
+ nominal power 23
+ max_power_red 0
+ rsl e1 tei 0
+ timeslot 0
+ phys_chan_config SDCCH8
+ timeslot 1
+ phys_chan_config TCH/F
+ timeslot 2
+ phys_chan_config TCH/F
+ timeslot 3
+ phys_chan_config TCH/F
+ timeslot 4
+ phys_chan_config TCH/F
+ timeslot 5
+ phys_chan_config TCH/F
+ timeslot 6
+ phys_chan_config TCH/F
+ timeslot 7
+ phys_chan_config TCH/F
+----
+====
+
+<1> In this example, the IPA Unit ID is specified as `1800 0`. Thus, the
+ first nanoBTS unit (`trx 0`) needs to be configured to 1800/0/0 and
+ the second nanoBTS unit (`trx 1`) needs to be configured to 1800/0/1.
+ You can configure the BTS unit IDs using the `ipaccess-config`
+ utility included in OpenBSC.
+
+[NOTE]
+====
+For building a multi-TRX setup, you also need to connect the TIB cables
+between the two nanoBTS units, as well as the coaxial/RF AUX cabling.
+====
diff --git a/OsmoBSC/osmobsc-usermanual.adoc b/OsmoBSC/osmobsc-usermanual.adoc
index 7f7f450..eec77d7 100644
--- a/OsmoBSC/osmobsc-usermanual.adoc
+++ b/OsmoBSC/osmobsc-usermanual.adoc
@@ -23,7 +23,7 @@
include::./common/chapters/bts.adoc[]
-include::../OsmoNITB/chapters/bts-examples.adoc[]
+include::{srcdir}/chapters/bts-examples.adoc[]
include::./common/chapters/bsc.adoc[]
--
To view, visit https://gerrit.osmocom.org/11805
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-gsm-manuals
Gerrit-Branch: master
Gerrit-MessageType: newchange
Gerrit-Change-Id: I96933dd4dd6cac159847647f1c642215051a9aad
Gerrit-Change-Number: 11805
Gerrit-PatchSet: 1
Gerrit-Owner: osmith <osmith at sysmocom.de>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20181116/92d32581/attachment.htm>