Change in docker-playground[master]: ttcn3-bsc-test: Add SCCPlite configs + jenkins-sccplite.sh

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.

Harald Welte gerrit-no-reply at lists.osmocom.org
Wed May 30 14:28:25 UTC 2018 

Harald Welte has submitted this change and it was merged. ( https://gerrit.osmocom.org/9391 )

Change subject: ttcn3-bsc-test: Add SCCPlite configs + jenkins-sccplite.sh
......................................................................

ttcn3-bsc-test: Add SCCPlite configs + jenkins-sccplite.sh

The existing dest config + jenkins.sh test 3GPP AoIP operation,
while the new set of configs + jenkins-sccplite.sh are testing
IPA/SCCPlite operation of osmo-bsc.

Change-Id: Ief0799a8f7d378dc3831e7988c9175166c82eace
---
A ttcn3-bsc-test/jenkins-sccplite.sh
A ttcn3-bsc-test/sccplite/BSC_Tests.cfg
A ttcn3-bsc-test/sccplite/osmo-bsc.cfg
3 files changed, 445 insertions(+), 0 deletions(-)

Approvals:
  Harald Welte: Looks good to me, approved; Verified



diff --git a/ttcn3-bsc-test/jenkins-sccplite.sh b/ttcn3-bsc-test/jenkins-sccplite.sh
new file mode 100755
index 0000000..2bf29f6
--- /dev/null
+++ b/ttcn3-bsc-test/jenkins-sccplite.sh
@@ -0,0 +1,43 @@
+#!/bin/sh
+
+. ../jenkins-common.sh
+
+mkdir $VOL_BASE_DIR/bsc-tester
+cp sccplite/BSC_Tests.cfg $VOL_BASE_DIR/bsc-tester/
+
+mkdir $VOL_BASE_DIR/bsc
+cp sccplite/osmo-bsc.cfg $VOL_BASE_DIR/bsc/
+
+network_create 172.18.11.0/24
+
+echo Starting container with BSC
+docker run	--rm \
+		--network $NET_NAME --ip 172.18.11.20 \
+		-v $VOL_BASE_DIR/bsc:/data \
+		--name ${BUILD_TAG}-bsc -d \
+		$REPO_USER/osmo-bsc-master
+
+for i in `seq 0 2`; do
+	echo Starting container with OML for BTS$i
+	docker run	--rm \
+			--network $NET_NAME --ip 172.18.11.10$i \
+			--name ${BUILD_TAG}-bts$i -d \
+			$REPO_USER/osmo-bts-master /usr/local/bin/respawn.sh osmo-bts-omldummy 172.18.11.20 $((i + 1234)) 1
+done
+
+echo Starting container with BSC testsuite
+docker run	--rm \
+		--network $NET_NAME --ip 172.18.11.203 \
+		-e "TTCN3_PCAP_PATH=/data" \
+		-v $VOL_BASE_DIR/bsc-tester:/data \
+		--name ${BUILD_TAG}-ttcn3-bsc-test \
+		$REPO_USER/ttcn3-bsc-test
+
+echo Stopping containers
+for i in `seq 0 2`; do
+	docker container kill ${BUILD_TAG}-bts$i
+done
+docker container kill ${BUILD_TAG}-bsc
+
+network_remove
+collect_logs
diff --git a/ttcn3-bsc-test/sccplite/BSC_Tests.cfg b/ttcn3-bsc-test/sccplite/BSC_Tests.cfg
new file mode 100644
index 0000000..a862bea
--- /dev/null
+++ b/ttcn3-bsc-test/sccplite/BSC_Tests.cfg
@@ -0,0 +1,29 @@
+[ORDERED_INCLUDE]
+"/osmo-ttcn3-hacks/Common.cfg"
+"/osmo-ttcn3-hacks/bsc/BSC_Tests.default"
+
+[LOGGING]
+*.JUnitLogger.testsuite_name := "BSC_Tests"
+
+[TESTPORT_PARAMETERS]
+*.BSCVTY.CTRL_HOSTNAME := "172.18.2.20"
+
+[MODULE_PARAMETERS]
+BSC_Tests.mp_bsc_ip   := "172.18.2.20";
+BSC_Tests.mp_test_ip   := "172.18.2.203";
+BSC_Tests.mp_bssap_cfg := {
+	transport := BSSAP_TRANSPORT_SCCPlite_SERVER,
+	sccp_service_type := "mtp3_itu",
+	sctp_addr := { 5000, "172.18.11.203", -1, "" },
+	own_pc := 185,
+	own_ssn := 254,
+	peer_pc := 187,
+	peer_ssn := 254,
+	sio := '83'O,
+	rctx := 0
+};
+
+[MAIN_CONTROLLER]
+
+[EXECUTE]
+BSC_Tests.control
diff --git a/ttcn3-bsc-test/sccplite/osmo-bsc.cfg b/ttcn3-bsc-test/sccplite/osmo-bsc.cfg
new file mode 100644
index 0000000..688943f
--- /dev/null
+++ b/ttcn3-bsc-test/sccplite/osmo-bsc.cfg
@@ -0,0 +1,373 @@
+!
+! OsmoBSC (1.0.1.122-630df) configuration saved from vty
+!!
+password foo
+!
+log file /data/osmo-bsc.log
+  logging filter all 1
+  logging color 0
+  logging print category 1
+  logging timestamp 1
+  logging level all everything
+  logging level rll notice
+  logging level cc notice
+  logging level mm notice
+  logging level rr notice
+  logging level rsl notice
+  logging level nm info
+  logging level pag notice
+  logging level meas notice
+  logging level msc notice
+  logging level mgcp notice
+  logging level ho notice
+  logging level ref notice
+  logging level nat notice
+  logging level ctrl notice
+  logging level filter debug
+  logging level pcu debug
+  logging level lglobal notice
+  logging level llapd notice
+  logging level linp notice
+  logging level lmux notice
+  logging level lmi notice
+  logging level lmib notice
+  logging level lsms notice
+  logging level lctrl notice
+  logging level lgtp notice
+  logging level lstats notice
+  logging level lgsup notice
+  logging level loap notice
+  logging level lss7 notice
+  logging level lsccp notice
+  logging level lsua notice
+  logging level lm3ua notice
+  logging level lmgcp notice
+!
+stats interval 5
+!
+line vty
+ no login
+ bind 0.0.0.0
+!
+e1_input
+ e1_line 0 driver ipa
+ e1_line 0 port 0
+ no e1_line 0 keepalive
+cs7 instance 0
+ point-code 0.23.3
+ asp asp-clnt-msc-0 5000 0 ipa
+  remote-ip 172.18.2.200
+ as as-clnt-msc-0 ipa
+  asp asp-clnt-msc-0
+  routing-key 0 0.23.3
+  point-code overried dpc 0.23.1
+network
+ network country code 1
+ mobile network code 1
+ encryption a5 0 1 3
+ neci 1
+ paging any use tch 0
+ handover 0
+ handover window rxlev averaging 10
+ handover window rxqual averaging 1
+ handover window rxlev neighbor averaging 10
+ handover power budget interval 6
+ handover power budget hysteresis 3
+ handover maximum distance 9999
+ dyn_ts_allow_tch_f 1
+ periodic location update 30
+ timer t3113 10
+ bts 0
+  type sysmobts
+  band DCS1800
+  cell_identity 0
+  location_area_code 1
+  dtx uplink force
+  dtx downlink
+  base_station_id_code 10
+  ms max power 15
+  cell reselection hysteresis 4
+  rxlev access min 0
+  radio-link-timeout 32
+  channel allocator ascending
+  rach tx integer 9
+  rach max transmission 7
+  channel-descrption attach 1
+  channel-descrption bs-pa-mfrms 5
+  channel-descrption bs-ag-blks-res 1
+  early-classmark-sending forbidden
+  ip.access unit_id 1234 0
+  oml ip.access stream_id 255 line 0
+  neighbor-list mode manual-si5
+  neighbor-list add arfcn 100
+  neighbor-list add arfcn 200
+  si5 neighbor-list add arfcn 10
+  si5 neighbor-list add arfcn 20
+  codec-support fr hr efr amr
+  gprs mode gprs
+  gprs 11bit_rach_support_for_egprs 0
+  gprs routing area 0
+  gprs network-control-order nc0
+  gprs cell bvci 1234
+  gprs cell timer blocking-timer 3
+  gprs cell timer blocking-retries 3
+  gprs cell timer unblocking-retries 3
+  gprs cell timer reset-timer 3
+  gprs cell timer reset-retries 3
+  gprs cell timer suspend-timer 10
+  gprs cell timer suspend-retries 3
+  gprs cell timer resume-timer 10
+  gprs cell timer resume-retries 3
+  gprs cell timer capability-update-timer 10
+  gprs cell timer capability-update-retries 3
+  gprs nsei 1234
+  gprs ns timer tns-block 3
+  gprs ns timer tns-block-retries 3
+  gprs ns timer tns-reset 3
+  gprs ns timer tns-reset-retries 3
+  gprs ns timer tns-test 30
+  gprs ns timer tns-alive 3
+  gprs ns timer tns-alive-retries 10
+  gprs nsvc 0 nsvci 1234
+  gprs nsvc 0 local udp port 23000
+  gprs nsvc 0 remote udp port 23000
+  gprs nsvc 0 remote ip 192.168.100.239
+  gprs nsvc 1 nsvci 0
+  gprs nsvc 1 local udp port 0
+  gprs nsvc 1 remote udp port 0
+  gprs nsvc 1 remote ip 0.0.0.0
+  no force-combined-si
+  trx 0
+   rf_locked 0
+   arfcn 871
+   nominal power 23
+   max_power_red 20
+   rsl e1 tei 0
+   timeslot 0
+    phys_chan_config CCCH+SDCCH4
+    hopping enabled 0
+   timeslot 1
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 2
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 3
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 4
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 5
+    phys_chan_config TCH/H
+    hopping enabled 0
+   timeslot 6
+    phys_chan_config PDCH
+    hopping enabled 0
+   timeslot 7
+    phys_chan_config PDCH
+    hopping enabled 0
+ bts 1
+  type sysmobts
+  band DCS1800
+  cell_identity 1
+  location_area_code 2
+  dtx uplink force
+  dtx downlink
+  base_station_id_code 11
+  ms max power 15
+  cell reselection hysteresis 4
+  rxlev access min 0
+  radio-link-timeout 32
+  channel allocator ascending
+  rach tx integer 9
+  rach max transmission 7
+  channel-descrption attach 1
+  channel-descrption bs-pa-mfrms 5
+  channel-descrption bs-ag-blks-res 1
+  early-classmark-sending forbidden
+  ip.access unit_id 1235 0
+  oml ip.access stream_id 255 line 0
+  neighbor-list mode manual-si5
+  neighbor-list add arfcn 100
+  neighbor-list add arfcn 200
+  si5 neighbor-list add arfcn 10
+  si5 neighbor-list add arfcn 20
+  codec-support fr hr efr amr
+  gprs mode gprs
+  gprs 11bit_rach_support_for_egprs 0
+  gprs routing area 0
+  gprs network-control-order nc0
+  gprs cell bvci 1235
+  gprs cell timer blocking-timer 3
+  gprs cell timer blocking-retries 3
+  gprs cell timer unblocking-retries 3
+  gprs cell timer reset-timer 3
+  gprs cell timer reset-retries 3
+  gprs cell timer suspend-timer 10
+  gprs cell timer suspend-retries 3
+  gprs cell timer resume-timer 10
+  gprs cell timer resume-retries 3
+  gprs cell timer capability-update-timer 10
+  gprs cell timer capability-update-retries 3
+  gprs nsei 1235
+  gprs ns timer tns-block 3
+  gprs ns timer tns-block-retries 3
+  gprs ns timer tns-reset 3
+  gprs ns timer tns-reset-retries 3
+  gprs ns timer tns-test 30
+  gprs ns timer tns-alive 3
+  gprs ns timer tns-alive-retries 10
+  gprs nsvc 0 nsvci 1235
+  gprs nsvc 0 local udp port 23000
+  gprs nsvc 0 remote udp port 23000
+  gprs nsvc 0 remote ip 192.168.100.239
+  gprs nsvc 1 nsvci 0
+  gprs nsvc 1 local udp port 0
+  gprs nsvc 1 remote udp port 0
+  gprs nsvc 1 remote ip 0.0.0.0
+  no force-combined-si
+  trx 0
+   rf_locked 0
+   arfcn 871
+   nominal power 23
+   max_power_red 20
+   rsl e1 tei 0
+   timeslot 0
+    phys_chan_config CCCH+SDCCH4
+    hopping enabled 0
+   timeslot 1
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 2
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 3
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 4
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 5
+    phys_chan_config TCH/H
+    hopping enabled 0
+   timeslot 6
+    phys_chan_config PDCH
+    hopping enabled 0
+   timeslot 7
+    phys_chan_config PDCH
+    hopping enabled 0
+ bts 2
+  type sysmobts
+  band DCS1800
+  cell_identity 1
+  location_area_code 1
+  dtx uplink force
+  dtx downlink
+  base_station_id_code 12
+  ms max power 15
+  cell reselection hysteresis 4
+  rxlev access min 0
+  radio-link-timeout 32
+  channel allocator ascending
+  rach tx integer 9
+  rach max transmission 7
+  channel-descrption attach 1
+  channel-descrption bs-pa-mfrms 5
+  channel-descrption bs-ag-blks-res 1
+  early-classmark-sending forbidden
+  ip.access unit_id 1236 0
+  oml ip.access stream_id 255 line 0
+  neighbor-list mode manual-si5
+  neighbor-list add arfcn 100
+  neighbor-list add arfcn 200
+  si5 neighbor-list add arfcn 10
+  si5 neighbor-list add arfcn 20
+  codec-support fr hr efr amr
+  gprs mode gprs
+  gprs 11bit_rach_support_for_egprs 0
+  gprs routing area 0
+  gprs network-control-order nc0
+  gprs cell bvci 1236
+  gprs cell timer blocking-timer 3
+  gprs cell timer blocking-retries 3
+  gprs cell timer unblocking-retries 3
+  gprs cell timer reset-timer 3
+  gprs cell timer reset-retries 3
+  gprs cell timer suspend-timer 10
+  gprs cell timer suspend-retries 3
+  gprs cell timer resume-timer 10
+  gprs cell timer resume-retries 3
+  gprs cell timer capability-update-timer 10
+  gprs cell timer capability-update-retries 3
+  gprs nsei 1236
+  gprs ns timer tns-block 3
+  gprs ns timer tns-block-retries 3
+  gprs ns timer tns-reset 3
+  gprs ns timer tns-reset-retries 3
+  gprs ns timer tns-test 30
+  gprs ns timer tns-alive 3
+  gprs ns timer tns-alive-retries 10
+  gprs nsvc 0 nsvci 1236
+  gprs nsvc 0 local udp port 23000
+  gprs nsvc 0 remote udp port 23000
+  gprs nsvc 0 remote ip 192.168.100.239
+  gprs nsvc 1 nsvci 0
+  gprs nsvc 1 local udp port 0
+  gprs nsvc 1 remote udp port 0
+  gprs nsvc 1 remote ip 0.0.0.0
+  no force-combined-si
+  trx 0
+   rf_locked 0
+   arfcn 871
+   nominal power 23
+   max_power_red 20
+   rsl e1 tei 0
+   timeslot 0
+    phys_chan_config CCCH+SDCCH4
+    hopping enabled 0
+   timeslot 1
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 2
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 3
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 4
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 5
+    phys_chan_config TCH/H
+    hopping enabled 0
+   timeslot 6
+    phys_chan_config PDCH
+    hopping enabled 0
+   timeslot 7
+    phys_chan_config PDCH
+    hopping enabled 0
+msc 0
+ ip.access rtp-base 4000
+ no bsc-welcome-text
+ no bsc-msc-lost-text
+ no bsc-grace-text
+ type normal
+ allow-emergency allow
+ amr-config 12_2k forbidden
+ amr-config 10_2k forbidden
+ amr-config 7_95k forbidden
+ amr-config 7_40k forbidden
+ amr-config 6_70k forbidden
+ amr-config 5_90k allowed
+ amr-config 5_15k forbidden
+ amr-config 4_75k forbidden
+ codec-list fr1 fr2 fr3 hr1 hr3
+ mgw remote-ip 172.18.2.203
+ asp-protocol ipa
+bsc
+ mid-call-timeout 0
+ no missing-msc-text
+ access-list-name bsc-list
+ctrl
+ bind 0.0.0.0

-- 
To view, visit https://gerrit.osmocom.org/9391
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings

Gerrit-Project: docker-playground
Gerrit-Branch: master
Gerrit-MessageType: merged
Gerrit-Change-Id: Ief0799a8f7d378dc3831e7988c9175166c82eace
Gerrit-Change-Number: 9391
Gerrit-PatchSet: 2
Gerrit-Owner: Harald Welte <laforge at gnumonks.org>
Gerrit-Reviewer: Harald Welte <laforge at gnumonks.org>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20180530/14aa5f65/attachment.htm>

More information about the gerrit-log mailing list