This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Pau Espin Pedrol gerrit-no-reply at lists.osmocom.orgPau Espin Pedrol has submitted this change and it was merged. Change subject: tests: dyn_ts_*: Add tests to verify dynamic timeslots during phone calls ...................................................................... tests: dyn_ts_*: Add tests to verify dynamic timeslots during phone calls Two different test suites are created since we want to run them with different HW, because some HW support one type of PDCH channels, and other HW supports the other one. Change-Id: Id5e61eaff39ac7a6585dc7de2aeb2469dd2ce726 --- A suites/dyn_ts_ipa/lib/testlib.py A suites/dyn_ts_ipa/mo_mt_call_dyn_ipa.py A suites/dyn_ts_ipa/suite.conf A suites/dyn_ts_osmo/lib/testlib.py A suites/dyn_ts_osmo/mo_mt_call_dyn_osmo.py A suites/dyn_ts_osmo/suite.conf 6 files changed, 130 insertions(+), 0 deletions(-) Approvals: Pau Espin Pedrol: Looks good to me, approved Jenkins Builder: Verified diff --git a/suites/dyn_ts_ipa/lib/testlib.py b/suites/dyn_ts_ipa/lib/testlib.py new file mode 100755 index 0000000..28a4975 --- /dev/null +++ b/suites/dyn_ts_ipa/lib/testlib.py @@ -0,0 +1,67 @@ +#!/usr/bin/env python3 +from osmo_gsm_tester.testenv import * + +def call_test_setup_run(bts_setup_cb=None, gprs_enable=True): + hlr = suite.hlr() + bts = suite.bts() + mgw_msc = suite.mgw() + mgw_bsc = suite.mgw() + stp = suite.stp() + msc = suite.msc(hlr, mgw_msc, stp) + bsc = suite.bsc(msc, mgw_bsc, stp) + ms_mo = suite.modem() + ms_mt = suite.modem() + + if bts_setup_cb is not None: + bts_setup_cb(bts) + + if gprs_enable: + ggsn = suite.ggsn() + sgsn = suite.sgsn(hlr, ggsn) + sgsn.bts_add(bts) + ggsn.start() + sgsn.start() + + hlr.start() + stp.start() + msc.start() + mgw_msc.start() + mgw_bsc.start() + + bsc.bts_add(bts) + bsc.start() + + bts.start() + wait(bsc.bts_is_connected, bts) + + hlr.subscriber_add(ms_mo) + hlr.subscriber_add(ms_mt) + + ms_mo.connect(msc.mcc_mnc()) + ms_mt.connect(msc.mcc_mnc()) + + ms_mo.log_info() + ms_mt.log_info() + + print('waiting for modems to attach...') + wait(ms_mo.is_connected, msc.mcc_mnc()) + wait(ms_mt.is_connected, msc.mcc_mnc()) + wait(msc.subscriber_attached, ms_mo, ms_mt) + + assert len(ms_mo.call_id_list()) == 0 and len(ms_mt.call_id_list()) == 0 + mo_cid = ms_mo.call_dial(ms_mt) + mt_cid = ms_mt.call_wait_incoming(ms_mo) + print('dial success') + + assert not ms_mo.call_is_active(mo_cid) and not ms_mt.call_is_active(mt_cid) + ms_mt.call_answer(mt_cid) + wait(ms_mo.call_is_active, mo_cid) + wait(ms_mt.call_is_active, mt_cid) + print('answer success, call established and ongoing') + + sleep(5) # maintain the call active for 5 seconds + + assert ms_mo.call_is_active(mo_cid) and ms_mt.call_is_active(mt_cid) + ms_mt.call_hangup(mt_cid) + wait(lambda: len(ms_mo.call_id_list()) == 0 and len(ms_mt.call_id_list()) == 0) + print('hangup success') diff --git a/suites/dyn_ts_ipa/mo_mt_call_dyn_ipa.py b/suites/dyn_ts_ipa/mo_mt_call_dyn_ipa.py new file mode 100755 index 0000000..1e7a5c0 --- /dev/null +++ b/suites/dyn_ts_ipa/mo_mt_call_dyn_ipa.py @@ -0,0 +1,22 @@ +#!/usr/bin/env python3 +from osmo_gsm_tester.testenv import * + +add_subdir_to_import_path("lib") +from testlib import call_test_setup_run + +def my_bts_setup(bts): + bts.set_num_trx(1) + bts.set_trx_phy_channel(0, 0, 'CCCH+SDCCH4') + bts.set_trx_phy_channel(0, 1, 'SDCCH8') + bts.set_trx_phy_channel(0, 2, 'TCH/F_PDCH') + bts.set_trx_phy_channel(0, 3, 'TCH/F_PDCH') + bts.set_trx_phy_channel(0, 4, 'TCH/F_PDCH') + bts.set_trx_phy_channel(0, 5, 'TCH/F_PDCH') + bts.set_trx_phy_channel(0, 6, 'TCH/F_PDCH') + bts.set_trx_phy_channel(0, 7, 'PDCH') + +#FIXME: if we don't enable gprs (gprs none in BSC vty) then dyn chans are broken, see OS#3244 +# Once Fixed, add a new test with following test: +#call_test_setup_run(bts_setup_cb=my_bts_setup, gprs_enable=False) + +call_test_setup_run(bts_setup_cb=my_bts_setup, gprs_enable=True) diff --git a/suites/dyn_ts_ipa/suite.conf b/suites/dyn_ts_ipa/suite.conf new file mode 100644 index 0000000..4ac2436 --- /dev/null +++ b/suites/dyn_ts_ipa/suite.conf @@ -0,0 +1,9 @@ +resources: + ip_address: + - times: 8 # msc, bsc, hlr, stp, mgw*2, sgsn, ggsn + bts: + - times: 1 + modem: + - times: 2 + features: + - voice diff --git a/suites/dyn_ts_osmo/lib/testlib.py b/suites/dyn_ts_osmo/lib/testlib.py new file mode 120000 index 0000000..8f0bc5a --- /dev/null +++ b/suites/dyn_ts_osmo/lib/testlib.py @@ -0,0 +1 @@ +../../dyn_ts_ipa/lib/testlib.py \ No newline at end of file diff --git a/suites/dyn_ts_osmo/mo_mt_call_dyn_osmo.py b/suites/dyn_ts_osmo/mo_mt_call_dyn_osmo.py new file mode 100755 index 0000000..3ba8045 --- /dev/null +++ b/suites/dyn_ts_osmo/mo_mt_call_dyn_osmo.py @@ -0,0 +1,22 @@ +#!/usr/bin/env python3 +from osmo_gsm_tester.testenv import * + +add_subdir_to_import_path("lib") +from testlib import call_test_setup_run + +def my_bts_setup(bts): + bts.set_num_trx(1) + bts.set_trx_phy_channel(0, 0, 'CCCH+SDCCH4') + bts.set_trx_phy_channel(0, 1, 'SDCCH8') + bts.set_trx_phy_channel(0, 2, 'TCH/F_TCH/H_PDCH') + bts.set_trx_phy_channel(0, 3, 'TCH/F_TCH/H_PDCH') + bts.set_trx_phy_channel(0, 4, 'TCH/F_TCH/H_PDCH') + bts.set_trx_phy_channel(0, 5, 'TCH/F_TCH/H_PDCH') + bts.set_trx_phy_channel(0, 6, 'TCH/F_TCH/H_PDCH') + bts.set_trx_phy_channel(0, 7, 'PDCH') + +#FIXME: if we don't enable gprs (gprs none in BSC vty) then dyn chans are broken, see OS#3244 +# Once Fixed, add a new test with following test: +#call_test_setup_run(bts_setup_cb=my_bts_setup, gprs_enable=False) + +call_test_setup_run(bts_setup_cb=my_bts_setup, gprs_enable=True) diff --git a/suites/dyn_ts_osmo/suite.conf b/suites/dyn_ts_osmo/suite.conf new file mode 100644 index 0000000..4ac2436 --- /dev/null +++ b/suites/dyn_ts_osmo/suite.conf @@ -0,0 +1,9 @@ +resources: + ip_address: + - times: 8 # msc, bsc, hlr, stp, mgw*2, sgsn, ggsn + bts: + - times: 1 + modem: + - times: 2 + features: + - voice -- To view, visit https://gerrit.osmocom.org/8063 To unsubscribe, visit https://gerrit.osmocom.org/settings Gerrit-MessageType: merged Gerrit-Change-Id: Id5e61eaff39ac7a6585dc7de2aeb2469dd2ce726 Gerrit-PatchSet: 3 Gerrit-Project: osmo-gsm-tester Gerrit-Branch: master Gerrit-Owner: Pau Espin Pedrol <pespin at sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: Neels Hofmeyr <nhofmeyr at sysmocom.de> Gerrit-Reviewer: Pau Espin Pedrol <pespin at sysmocom.de>