Change in simtrace2[master]: SIMtrace: fix default SIM_RST pin state to allow phone controlled reset

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.

Kévin Redon gerrit-no-reply at lists.osmocom.org
Tue Jul 3 16:45:26 UTC 2018


Kévin Redon has uploaded this change for review. ( https://gerrit.osmocom.org/9851


Change subject: SIMtrace: fix default SIM_RST pin state to allow phone controlled reset
......................................................................

SIMtrace: fix default SIM_RST pin state to allow phone controlled reset

Change-Id: I1942ec6bd499cb2e14f6d7699a2b2d9b4197e654
---
M firmware/libboard/simtrace/include/board.h
1 file changed, 3 insertions(+), 1 deletion(-)



  git pull ssh://gerrit.osmocom.org:29418/simtrace2 refs/changes/51/9851/1

diff --git a/firmware/libboard/simtrace/include/board.h b/firmware/libboard/simtrace/include/board.h
index 691dbc3..c5f4dc4 100644
--- a/firmware/libboard/simtrace/include/board.h
+++ b/firmware/libboard/simtrace/include/board.h
@@ -66,8 +66,10 @@
 #define PIN_IO_SW_SNIFF        {PIO_PA19, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
 /* Connect all lines (VPP, CLK, RST, and I/O) between card and phone */
 #define PINS_BUS_SNIFF          PIN_SC_SW_SNIFF, PIN_IO_SW_SNIFF
+/* Card RST reset signal input (use as input since the phone will drive it) */
+#define PIN_SIM_RST_SNIFF      {PIO_PA7, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
 /* Pins used to sniff phone-card communication */
-#define PINS_SIM_SNIFF          PIN_SIM_IO, PIN_SIM_CLK, PIN_SIM_RST
+#define PINS_SIM_SNIFF          PIN_SIM_IO, PIN_SIM_CLK, PIN_SIM_RST_SNIFF
 /* Disable power converter 4.5-6V to 3.3V (active high) */
 #define PIN_SIM_PWEN_SNIFF     {SIM_PWEN, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
 /* Enable power switch to forward VCC_PHONE to VCC_SIM (active high) */

-- 
To view, visit https://gerrit.osmocom.org/9851
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings

Gerrit-Project: simtrace2
Gerrit-Branch: master
Gerrit-MessageType: newchange
Gerrit-Change-Id: I1942ec6bd499cb2e14f6d7699a2b2d9b4197e654
Gerrit-Change-Number: 9851
Gerrit-PatchSet: 1
Gerrit-Owner: Kévin Redon <kredon at sysmocom.de>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20180703/a1f32b15/attachment.htm>


More information about the gerrit-log mailing list